智能数字压力校验仪在压力控制器检定中的应用
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:Application of intelligent digital pressure calibrator in pressure controller verification
  • 作者:包玉树 ; 胡永建 ; 黄亚龙 ; 殷峰 ; 吴剑 ; 王泽仁
  • 英文作者:BAO Yushu;HU Yongjian;HUANG Yalong;YIN Feng;WU Jian;WANG Zeren;Jiangsu Fang Tian Power Technology Co.,Ltd;Jiangsu Wind Power Technology Co.,Ltd.;
  • 关键词:智能数字压力校验仪 ; 压力控制器 ; 检定
  • 英文关键词:intelligent digital pressure calibrator;;pressure controller;;verification
  • 中文刊名:DSJS
  • 英文刊名:Audio Engineering
  • 机构:江苏方天电力技术有限公司;江苏起风电力科技有限公司;
  • 出版日期:2018-06-05
  • 出版单位:电声技术
  • 年:2018
  • 期:v.42;No.400
  • 语种:中文;
  • 页:DSJS201806019
  • 页数:3
  • CN:06
  • ISSN:11-2122/TN
  • 分类号:77-79
摘要
在压力控制器检定方面,采用传统检定方式难以实现数据的准确记录。而采用智能数字压力校验仪,则能对开关通断时瞬间压力值进行自动记录,因此可以在压力控制器检定中得到应用。从应用效果来看,采用智能校验仪得到的数据整体较小,切换差在0. 06~0. 08 MPa之间,波动相对较小,只需要2~3 min即可完成控制器检定,而测量不确定评定结果为p=0. 695 MPa,U=0. 002 MPa,k=2,能够满足压力控制器检定的精度要求。
        In the aspect of pressure controller verification,the traditional calibration method is difficult to achieve accurate data recording. The use of the intelligent digital pressure calibrator can automatically record the instantaneous pressure value of the switch on and off,so it can be applied to the pressure controller verification. From the application effect,the data obtained by the intelligent calibrator are smaller,the difference is between 0. 06 ~ 0. 08 MPa,the fluctuation is relatively small,only 2 ~ 3 min can be used to complete the controller verification,and the measurement uncertainty results are p = 0.695 MPa,U = 0. 002 MPa,k = 2,which can meet the precision requirements of the pressure controller verification.
引文
[1]叶昆满,张海金.压力控制器压力示值的测量不确定度评定[J].中国检验检测,2017,25(3):43.
    [2]李信,王忠平,张曦.数字智能压力校验仪检定压力表不确定度分析[J].工业计量,2016,26(S2):54-55.
    [3]陈兴建,李送云.压力控制器测量值的不确定度评定[J].计量与测试技术,2015,42(2):56+58.
    [4]郑金娟,郭勇冠.基于PPC4E数字式压力控制器的压力仪表自动检定/校准技术研究[J].计测技术,2014,34(3):71-73+79.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700