摘要
以EVH1-12高可靠性真空断路器为原型,通过Pro/e按图纸进行1:1建模并导入Adams软件中建立多刚体动力学虚拟样机,通过对影响合闸弹跳因素的仿真分析,将得到的数据与型式试验数据对比,获得了设计参数,为后期的新产品研发提供了可靠有效的技术支持,可降低研发成本,缩短研发周期。
The high-reliability vacuum circuit breaker, EVH1-12 was taken as the prototype. The model was built by Pro/e according to the drawing and imported into Adams.The rigid multi-body dynamics virtual prototype was built in the software. The simulation analysis of the factors affecting the switching bounce was completed.The obtained data was compared with the type test data in order to accumulate the modeling experience and obtain the design parameters, which provide the reliable, effective technical support for the later new product research and development, so as to reduce the cost of research and development, and to shorten the research and development cycle.
引文
[1]徐黎明.浅析真空开关的合闸弹跳和分闸反弹[J].高压电器,2000,36(3):52-53.
[2]李洪奎,谭东现.真空断路器触头弹跳性能分析[J].华通技术,2006(3):1-4.
[3]吴伟光,马履中.真空断路器触头合闸弹跳特性的研究[J].江苏理工大学学报(自然科学版),2000,21(3):58-61.
[4]郑欣,刘荣海,杨迎春,等.基于Adams的CT14型高压断路器弹簧操动机构动力学仿真分析[J].高压电器,2017,53(7):118-124.
[5]马曾锐,赵伟涛.配弹簧机构的高压断路器分闸特性建模与仿真[J].高压电器,2017,53(5):109-115.
[6]朴吉兴,徐国政,黄瑜珑.ZNl2—12型断路器动力学仿真与分析[J].高压电器,2007,43(3):169-171.
[7]吴良云.真空断路器合闸弹跳分析及改善对策[J].机电信息,2017(6):43-44.
[8]周印政,庄火庚,陆旻,等.基于ADAMS的真空断路器合闸弹跳分析[J].低压电器,2014(4):13-15.