基于装配关系的装配单元划分方法研究
|
摘要
为提高复杂零件的装配单元划分效率,在分析零件装配关系的基础上建立零件之间的权值矩阵,在此基础上进行装配单元的划分。该方法将零件间的复杂关系进行量化,使用Floyd算法进行权值计算,提高单元划分的效率。以某行星减速器为装配单元划分过程为例,验证了方法的可行性和高效性。
In order to improve the efficiency of the assembling unit partition of complex parts,the weight matrix between parts is established by analyzing the assembling relation of parts,and the assembling unit is divided on the basis of this matrix. This method quantifies the complex relationship between parts,uses the floyd algorithm for the weight calculation,and improves the efficiency of the unit division. The feasibility and efficiency of the method are verified by a planetary reducer as an example.
In order to improve the efficiency of the assembling unit partition of complex parts,the weight matrix between parts is established by analyzing the assembling relation of parts,and the assembling unit is divided on the basis of this matrix. This method quantifies the complex relationship between parts,uses the floyd algorithm for the weight calculation,and improves the efficiency of the unit division. The feasibility and efficiency of the method are verified by a planetary reducer as an example.
引文
[1]范玉青.线代飞机制造技术[M].北京:北京航空航天大学出版社,2001.
[2]Bourjault A,Lhote A.Modelling an assembly process[J].IEEE Transaction on Automation of Manufacturing Industry,1986(20):183-98.
[3]Homem De Mello L S,Sanderson A C.Correct and Complete Algorithm for the Generation of M echanical Assembly Sequences[J].Robotics and Automation,1991,7(2):227-240.
[4]Romeo M.Marian,Lee H.S.Luong,Kazem Abhary.Assembly Sequence Planning and Optimisa-tion Using Genetic Algrorithms[J].Applied Soft Computing,2003(2/3F):223-253.
[5]李丽萍,李原,张开富.基于图树模型的飞机装配单元划分机[J].机械科学与技术,2008,27(2):157-161.
[6]于良,杨波,周闯,等.基于功能和装配关系的装配单元规划[J].组合机床与自动化加工技术,2014(10):120-123.
[7]Das SK,Yedlarajiah P,Narendra R.An approch for Estimating the End of life product disassem-bly effort and cost[J].International journal of product Research.2000,38(3):657-673.
[8]柳雪飞,朱跃.基于Floyd算法建模的研究应用[J].科技创业.2015(7):100-102.
[9]贾庆浩.基于工程语义的虚拟装配序列规划[D].广州:华南理工大学,2012.
[10]刘长春.基于单元的数控机床装配设计关键技术研究[D].沈阳:东北大学,2013.
[11]Ericsson A,Erixon C.Controlling Design Variants:M odular Product Platforms[M].New York,USA:ASM E Press,1999.
[2]Bourjault A,Lhote A.Modelling an assembly process[J].IEEE Transaction on Automation of Manufacturing Industry,1986(20):183-98.
[3]Homem De Mello L S,Sanderson A C.Correct and Complete Algorithm for the Generation of M echanical Assembly Sequences[J].Robotics and Automation,1991,7(2):227-240.
[4]Romeo M.Marian,Lee H.S.Luong,Kazem Abhary.Assembly Sequence Planning and Optimisa-tion Using Genetic Algrorithms[J].Applied Soft Computing,2003(2/3F):223-253.
[5]李丽萍,李原,张开富.基于图树模型的飞机装配单元划分机[J].机械科学与技术,2008,27(2):157-161.
[6]于良,杨波,周闯,等.基于功能和装配关系的装配单元规划[J].组合机床与自动化加工技术,2014(10):120-123.
[7]Das SK,Yedlarajiah P,Narendra R.An approch for Estimating the End of life product disassem-bly effort and cost[J].International journal of product Research.2000,38(3):657-673.
[8]柳雪飞,朱跃.基于Floyd算法建模的研究应用[J].科技创业.2015(7):100-102.
[9]贾庆浩.基于工程语义的虚拟装配序列规划[D].广州:华南理工大学,2012.
[10]刘长春.基于单元的数控机床装配设计关键技术研究[D].沈阳:东北大学,2013.
[11]Ericsson A,Erixon C.Controlling Design Variants:M odular Product Platforms[M].New York,USA:ASM E Press,1999.