摘要
系统地介绍了霍尔元件检测刀位的简易刀架工作原理,基于西门子802D系统换刀子程序介绍了其输入、输出信号及换刀过程中的要求。针对手动、自动换刀控制,分别编制了相应的换刀PLC程序,通过程序调试实现了换刀功能。结合数控车床换刀实践,介绍了常见的换刀故障及排除方法。
This paper systematically introduces the working principle of the simple tool holder which the tool position is detected by hall element, based on Siemens 802 D system tool changing subroutine, the input and output signals and the requirements in tool changing process are introduced. Aiming at manual and automatic tool changing control, corresponding PLC program for tool changing is compiled,and the function of tool changing is realized through program debugging. Combining with the practice of tool changing of NC lathe, the common tool changing faults and their troubleshooting methods are introduced.
引文
[1]刘树青,吴金娇,等.数控系统PLC编程与实训教程(西门子)[M].南京:东南大学出版社,2016:72-73.
[2]龚仲华.西门子数控系统PLC程序典例[M].北京:机械工业出版社,2015:231-232.
[3]雷楠南.西门子802D系统数控机床电动刀架PLC控制[J].安徽电子信息职业技术学院学报,2018(3):5-6.
[4]陈学军.数控机床故障诊断与维修[M].北京:北京大学出版社,2012:75-80.
[5]陈炳森,胡华丽.西门子802D数控系统PLC编程与应用[J].装备制造技术,2008(9):148-150.
[6]SINUMERIK 802S/C/D PLC子程序应用指南[M].北京:西门子中国有限公司,2004:141-145.
[7]SINUMERIK 802D Solution Line PLC子程序库说明技术手册[M].北京:西门子中国有限公司,2009:33-35.