摘要
通过理论研究结合数值模拟的方式,采用ANSYS/LS-DYNA软件建立起水下爆破模型,得到水击波的传播图形,以及数值模拟波形产生锯齿状的结论和15m水深处炸药爆炸的水击波峰值压力公式,可供相似条件下的水下爆破参考。
With theoretical research combining with numerical simulation method and with ANSYS/LS-DYNA software,underwater blasting model is established.Water hammer wave propagation pattern,conclusion that numerical simulation waveform is jagged and the formula of peak pressure of surge wave of explosive blasting at depth of 15 m underwater are obtained,which are referential to underwater blasting of similar conditons.
引文
[1]Cole R H.Underwater Explosions.New Jersey:LISA,Princeton University Press,1948.
[2]B.B.加尔基.水下爆破工程[M].国防工业出版社,1992.
[3]鲁忠宝.典型装药水中爆炸参数与水深关系的仿真研究[J].鱼雷技术,2007(1):45-47.
[4]高明涛,李昕,周晶.水下钻孔爆破水中冲击波的数值模拟研究[J].水电能源科学,2009(4):138-141.
[5]钟冬望,黄小武,殷秀红,等.水下爆炸冲击波的数值模拟与试验研究[J].爆破,2015(4):17-20.
[6]辛春亮,秦健,刘科种,等.基于LS-DYNA软件的水下爆炸数值模拟研究[J].弹箭与制导学报,2008(3):156-158.
[7]时党勇,李裕春,张胜民.基于ANSYS/LS.DYNA8.1进行显式动力分析[M].北京:清华大学出版社,2005.
[8]司剑峰.水下爆破冲击波理论分析及试验研究[D].武汉科技大学,2013.