摘要
研究了不同颗粒形貌的钨粉经同一设备配炭后钨粉与炭黑的混合均匀性,以及后续碳化钨粉的质量。结果表明:钨粉的颗粒形貌对配炭后W+C混合料的均匀性影响较大,分散颗粒的钨粉与炭黑混合更均匀,生产的碳化钨粉中游离碳和W_2C的含量更低。
Mixing Uniformity of tungsten powders and carbon black after carbon blending for tungsten powders with different particle morphology in the same equipment was studied as well as the quality of subsequent tungsten carbide powders.The results show that the particle morphology of tungsten powders has a great effect on the uniformity of the W+C mixture after carbon blending.The tungsten powder with disperse particles is more uniformly mixed with carbon black,and the produced tungsten carbide powder has a lower content of free carbon and W_2C.
引文
[1]陈楚轩.硬质合金质量控制原理[M].自贡:自贡力通印刷厂,2008.
[2]吴其山.WC-Co硬质合金生产过程中碳的控制与调节[J].硬质合金,2002,19(10):47-50.
[3]吴悦梅,熊计,赖人铭.碳含量对WC-Co硬质合金显微组织的影响及其控制[J].硬质合金,2008,25(3):179-185.
[4]田建华.粗颗粒钨粉配炭新工艺的研究[J].硬质合金,2006,23(2):79-83.