事故后安全壳内环境条件计算分析
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:Computational Analysis of Environment Condition Inside Containment After Accident
  • 作者:孙婧 ; 马秀歌 ; 陈巧艳
  • 英文作者:SUN Jing;MA Xiuge;CHEN Qiaoyan;China Nuclear Power Engineering Co.,Ltd.;
  • 关键词:安全壳 ; 环境条件 ; 设计基准事故 ; 严重事故
  • 英文关键词:containment;;enviromental condition;;design basis accident;;severe accident
  • 中文刊名:NYNF
  • 英文刊名:Southern Energy Construction
  • 机构:中国核电工程有限公司;
  • 出版日期:2015-12-25
  • 出版单位:南方能源建设
  • 年:2015
  • 期:v.2;No.5
  • 语种:中文;
  • 页:NYNF201504018
  • 页数:4
  • CN:04
  • ISSN:44-1715/TK
  • 分类号:58-61
摘要
以M 310+型核电厂为例,计算分析了设计基准事故以及严重事故后安全壳内压力、温度环境条件。对核电厂设计基准事故和严重事故分析分别采用了法国的安全壳热工水力计算分析程序PAREO和一体化严重事故分析程序MAAP。计算分析给出了设计基准事故和严重事故下安全壳压力、大气温度和露点温度的峰值随时间变化曲线。计算结果表明设计基准事故和严重事故后,安全壳压力峰值工况均以MSLB为始发事故;设计基准事故后安全壳压力峰值为0.511 8 MPa,严重事故后安全壳压力峰值为0.602 MPa。
        The pressure and tempereature inside containment after both design basis accidents and severe accidents are calculated and anaylzed based on M 310 + NPP.Design basis accidents are calculated by French containment thermal hydraulic analysis code PAREO and severe accidents are calculated by integrated severe accident analysis code MAAP.The containment peak pressure,atomosphere and dew peak temperature of desigan basis accident and severe accident are calculated and shown.The results show that both design basis and severe accidents containment peak pressure conditions are induced by MSLB accident,that the peak containment pressure after design basis accidents is 0.511 8 MPa and after severe accidents is 0.602 MPa.
引文
[1]HAF 102—2004,核动力厂设计安全规定[S].
    [2]朱继洲.核反应堆安全分析[M].北京:原子能出版社,2004.
    [3]臧希年.核电厂系统及设备[M].北京:清华大学出版社,2003.
    [4]陈松,刘鑫,史国宝,等.严重事故下安全壳内环境条件计算分析[J].核动力工程,2006,1(增刊):14-17.CHEN Song,LIU Xin,SHI Guobao,et al.Computational Analysis of Environment Condition Inside Containment under Severe Accident[J].Nuclear Pow er Engineering,2006,1(Supp.1):14-17.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700