摘要
基于市场要求唐钢以Cu、Ni、Cr为成分基础设计了一种耐低温冲击的耐候钢Q355NHE。-40℃冲击试验结果显示5 mm厚试样冲击功达到80 J以上。在东北大学进行周期浸润实验后显示,Q355NHE对比Q 235B钢种72 h侵蚀后,相对腐蚀失重率为55.93%,对比Q 345B钢种144 h侵蚀后,相对腐蚀失重率为47.86%。
Based on the requirement of the market, the HBIS Group Tangsteel designed a low-temperature impact resistance of the weathering steel Q355 NHE on the basis of Cu、Ni、Cr.-40 ℃ impact test according to the results that the 5 mm thick sample impact energy can get more than 80 J. Cycle after infiltration experiment at northeastern university shows that Q355 NHE contrast Q235 B steel 72 h after erosion, relative corrosion weight loss rate is55.93%. By contrast to Q345 B steel 144 h after erosion, relative corrosion weight loss rate is 46.54%.
引文
[1]于千.耐候钢发展现状及展望[J].钢铁研究学报,2007(11):1-4.
[2]廖春光.SPA-H耐候窄带钢质量缺陷分析及改进[J].河北冶金,2013(9):50-52.
[3]张钦钊.宝钢B450NQ耐候钢CCT曲线测定及组织性能研究[J].河北冶金,2018(4):17-20.
[4]张全成.耐候钢表面自形成锈层的保护机理研究[J].材料导报,2004(8):169.
[5]封辉.355 MPa级耐候钢中Cu、Cr和P元素的作用[D].沈阳:东北大学,2010.
[6]岳丽杰.Cu-P-RE耐候钢中稀土行为作用及机理的研究[D].沈阳:东北大学,2006.
[7]陈江风.合金元素对SPA-H耐候钢显微组织和低温冲击韧性的影响[J].机械工程材料,2015,39(7):48-52.
[8]江林.影响碳钢低温冲击吸收功的因素及提高途径[J].机械工人,1998(9):3.