基于蓄电池盒盖翻转移位机构的设计

详细信息    查看全文 | 推荐本文 |

英文篇名：Design of Turn-over Position Mechanism Based on Battery Cover 作者：刘云志 ; 曾慧仁 英文作者：LIU Yun-zhi;ZENG Hui-ren;Dongguan Vocational and Technical College; 关键词：翻转移位 ; 蓄电池 ; 盒盖 ; 无杆气缸 英文关键词：Flip position;;Battery;;Cover;;Rodless cylinder 中文刊名：KJSJ 英文刊名：Science & Technology Vision 机构：东莞职业技术学院; 出版日期：2019-04-15 出版单位：科技视界 年：2019 期：No.269 基金：东莞职业技术学院,政校行企项目(政201605) 语种：中文; 页：KJSJ201911049 页数：2 CN：11 ISSN：31-2065/N 分类号：111-112

摘要

针对蓄电池盒盖在传送后进行组装时需要翻转的情况,设计了蓄电池盒盖翻转移位机构,该机构采用了无杆气缸和单杆气缸联合来控制行程,分别设置了左中右三个工作位置,交替对左右边物料进行移位及翻转,能在翻转同时进行移位,一方面便于蓄电池盒盖与盒体的安装,另一方面也提高了机器的工作效率。
        Aiming at the situation that the battery cover needs to be turned over when it is assembled after transmission, a mechanism of the battery cover turnover position is designed. The mechanism uses the rodless cylinder and the single-rod cylinder to control the stroke, and sets three working positions on the left, middle and right respectively. The material on the left and right sides can be shifted and reversed alternately, so that the battery can be shifted at the same time when it is reversed. On the one hand, it is convenient for the battery to move at the same time. On the other hand, the installation of the cover and the box body also improves the working efficiency of the machine.

引文

[1]潘楚滨.液压与气压传动[M].北京:机械工业出版社,2010.
    [2]申冰冰.实用机构图册[M].北京:机械工业出版社, 2013.
    [3]张士军,陈红娟. UG机械设计[M].北京:机械工业出版社, 2013.