定子线圈涨形应力优化技术探讨

详细信息    查看全文 | 推荐本文 |

英文篇名：Discussion on Stress Forming Optimization Technology for Stator Coil 作者：杨振中 ; 袁双玲 ; 龙云峰 ; 粟诗雨 ; 许欣 英文作者：YANG Zhenzhong;YUAN Shuangling;LONG Yunfeng;SU Shiyu;XU Xin;CRRC Zhuzhou Electric Co.Ltd.; 关键词：定子线圈 ; 涨形 ; 应力 ; 弧长 英文关键词：stator coil;;forming;;stress;;arc length 中文刊名：WDJZ 英文刊名：Micromotors 机构：中车株洲电机有限公司; 出版日期：2019-02-28 出版单位：微电机 年：2019 期：v.52;No.302 语种：中文; 页：WDJZ201902013 页数：3 CN：02 ISSN：61-1126/TM 分类号：72-74

摘要

文章对交流电机定子线圈涨形应力优化技术进行探讨,通过仿真和试验数据分析不同涨形参数下线圈端部弧长的变化和受力情况,确定基于端部弧长相等、成型应力一致的定子线圈涨形优化技术。
        In this paper, the optimization technique of the stress forming for the stator coil in AC motor was explored. The simulation and experimental data were used to analyze the change of the arc length and the force of the coil end under different forming parameters. Then, it was determined that the stator coil forming optimization technique was based on the same end arc length and uniform forming stress.

引文

[1] 陈传尧.工程力学[M].北京:高等教育出版社,2006.
    [2] 盛兆年.圈式定子成型线圈端部弧形的计算[J]. 中小型电机,1997,24(4):22-23.