PLC控制的新型立体车库

详细信息    查看全文 | 推荐本文 |

英文篇名：PLC Control of the New Three-dimensional Garage 作者：许士杰 ; 唐晨 ; 许炯炯 ; 刘国振 ; 朱志豪 英文作者：XU Shi-jie;TANG Chen;XU Jiong-jiong;LIU Guo-zhen;ZHU Zhi-hao;Nanjing Institute of Engineering; 关键词：立体车库 ; PLC模块 ; 升降机 英文关键词：solid garage;;PLC module;;elevato 中文刊名：JXKF 英文刊名：Mechanical & Electrical Engineering Technology 机构：南京工程学院; 出版日期：2019-03-07 16:28 出版单位：机电工程技术 年：2019 期：v.48;No.323 语种：中文; 页：JXKF201902026 页数：3 CN：02 ISSN：44-1522/TH 分类号：70-71+111

摘要

由于车辆急剧增多,对车库的需求越来越大,立体车库成为一种选择。探讨立体车库的发展情况,并在此基础上设计一种全新的立体车库,采用PLC模块精确控制。该立体车库由螺杆、升降机、承载台、停车板等机构组成,由电机以及气缸作为动力源,控制该车库工作。借助UG软件对该车库模拟分析,相对市场上的具有更高的可靠性与便捷性。
        Due to the rapid increase of vehicles and the increasing demand for garage, three-dimensional garage has become an option.The development of three-dimensional garage was discussed, and on this basis, a new three-dimensional garage was designed, which was precisely controlled by PLC module. The three-dimensional garage was composed of screw, elevator, bearing platform, parking plate, etc. It is controlled by motor and cylinder as power source. UG software was used to simulate and analyze the garage, which had higher reliability and convenience than those in the market.

引文

[1]交安.智能立体停车库创造停车新空间[J].道路交通管理,2014(07):43.
    [2]袁学勇.智能型移动式钢轨气压焊接设备的研制[D].大连:大连交通大学,2008.
    [3]杨小莉.基于PLC的立体车库控制系统设计[J].电工技术,2007(05):49-50.
    [4]袁海亮.基于PLC的升降平移式立体车库控制系统设计[J].信息通信,2015(08):55.
    [5]刘三帅,张蕾.基于PLC的立体车库及监控系统设计[J].自动化技术与应用,2018,37(07):76-78.
    [6]曹玉超.施工升降机自动控制系统应用研究[D].太原:中北大学,2013.
    [7]王耀斌,李世武,胡明.城市停车场的规划与设计[J].吉林工业大学自然科学学报, 2001(03):98-101.
    [8]王天奇.立体车库及其市场前景[J].机电一体化,1996(04):40-42.