基于CAE技术的前壳注塑模浇注系统优化设计
|
摘要
以某前壳注塑成型的浇注系统优化为例,介绍了计算机辅助工程(CAE)软件在模具开发中的作用,通过Moldflow软件设计了3种塑件浇注系统进胶方案并进行比较分析,经综合比较,最终选取方案3作为进胶方案进行塑件成型。经实际生产验证,采用方案3成型的模具结构合理可靠,注塑的塑件质量良好,表明基于CAE技术的模具浇注系统优化方案是切实可行的,具有较大的应用参考价值。
Taking the optimization of pouring system for injection moulding of a front shell as an example,the role of computer aided engineering(CAE) software in the development of moulds was introduced.Through Moldflow software,three kinds of gluing schemes for the pouring system of plastic parts were designed and compared.After comprehensive comparison,the final scheme 3 was selected as the rubber feeding scheme for plastic parts forming.The actual production proves that the structure of the mould formed by scheme 3 is reasonable and reliable,and the quality of the injection parts is good.It shows that the optimization scheme of the injection system based on CAE technology is feasible and has great application reference value.
Taking the optimization of pouring system for injection moulding of a front shell as an example,the role of computer aided engineering(CAE) software in the development of moulds was introduced.Through Moldflow software,three kinds of gluing schemes for the pouring system of plastic parts were designed and compared.After comprehensive comparison,the final scheme 3 was selected as the rubber feeding scheme for plastic parts forming.The actual production proves that the structure of the mould formed by scheme 3 is reasonable and reliable,and the quality of the injection parts is good.It shows that the optimization scheme of the injection system based on CAE technology is feasible and has great application reference value.
引文
[1]辛然然.基于CAE技术的双色显示器前壳注射模具优化设计[D].青岛:青岛科技大学,2014.
[2]张春鹏,王锡明,张远斌,等.基于CAE技术的转盘架注塑模具优化设计[J].赤峰学院学报:自然科学版,2016,32(17):32-34.
[3]王锦红,何冰强.基于Moldflow的棘架套件浇注系统方案CAE分析[J].塑料,2016,45(1):79-82.
[4]谢金林,盛希龙,王小新.基于CAE支架的浇注系统与冷却系统的优化设计[J].模具工业,2014(6):25-28.
[5]陆建军,赵威,袁国定.基于CAE的轿车装饰板注射模浇注系统优化设计[J].模具工业,2011,37(9):14-18.
[6]贺圣彦,楚纯朋,邓娇,等.基于CAE厚壁件注塑浇口优化设计[J].塑料工业,2016(6):53-56.
[7]陈叶娣,黄敏高,严小锋,等.基于CAE技术的智能电表箱注塑模浇口优化设计[J].塑料科技,2016,44(2):60-63.
[8]张华.基于MPI的注塑模具计算机辅助技术研究[J].塑料工业,2015,43(11):8-11.
[2]张春鹏,王锡明,张远斌,等.基于CAE技术的转盘架注塑模具优化设计[J].赤峰学院学报:自然科学版,2016,32(17):32-34.
[3]王锦红,何冰强.基于Moldflow的棘架套件浇注系统方案CAE分析[J].塑料,2016,45(1):79-82.
[4]谢金林,盛希龙,王小新.基于CAE支架的浇注系统与冷却系统的优化设计[J].模具工业,2014(6):25-28.
[5]陆建军,赵威,袁国定.基于CAE的轿车装饰板注射模浇注系统优化设计[J].模具工业,2011,37(9):14-18.
[6]贺圣彦,楚纯朋,邓娇,等.基于CAE厚壁件注塑浇口优化设计[J].塑料工业,2016(6):53-56.
[7]陈叶娣,黄敏高,严小锋,等.基于CAE技术的智能电表箱注塑模浇口优化设计[J].塑料科技,2016,44(2):60-63.
[8]张华.基于MPI的注塑模具计算机辅助技术研究[J].塑料工业,2015,43(11):8-11.