基于COSMOSMotion轴承套圈方向转换机构设计及仿真
|
摘要
主要是设计隧道式交变磁场去应力装置中的轴承套圈的转向机构,利用SolidWorks三维设计软件通过拉伸、切除、阵列、扫描等特征方法[1]对该机构进行三维建模,然后运用运动仿真插件COSMOSMotion对三维模型进行运动仿真,得到轴承套圈的速度和加速度曲线,对比仿真结果修改设计方案。通过三维建模和运动仿真提高了机构设计的形象性和直观性~[2]。
This paper is about the design of the direction conversion mechanism of tunnel- based destressing device for alternating magnetic field. Using the SolidWorks 3D design software,we build the 3D model of the mechanism through such methods as stretching,excising,arraying,and scanning,then we simulate the 3D model based on the motion simulation plug- in COSMOSMotion to work out the speed and acceleration curve of the bearing ring so as to modify the design scheme according to the simulation results. Through 3D modeling and motion simulation,the vividness and visualization of the mechanism design are improved.
This paper is about the design of the direction conversion mechanism of tunnel- based destressing device for alternating magnetic field. Using the SolidWorks 3D design software,we build the 3D model of the mechanism through such methods as stretching,excising,arraying,and scanning,then we simulate the 3D model based on the motion simulation plug- in COSMOSMotion to work out the speed and acceleration curve of the bearing ring so as to modify the design scheme according to the simulation results. Through 3D modeling and motion simulation,the vividness and visualization of the mechanism design are improved.
引文
[1]李星优,谢俊,全勇.基于SolidW orks建模的VBA创建曲线曲面设计[J].科技创新导报,2014,11(3):35-36.
[2]张军,李宪华.基于COSMOSMotion的凸轮推杆机构运动仿真[J].煤矿机械,2006,27(9):103-105.
[3]张海燕,韩丽娜.基于COSMOSMotion的偏心齿轮机构运动仿真[J].包装工程,2007,28(12):147-149.
[4]王秀玲.基于SolidW orks的齿轮三维造型方法研究[J].机械设计与制造,2006,44(4):93-94.
[5]薛辰.基于SolidW orks的齿轮三维设计的方法的研究[J].机电产品开发与创新,2010,23(3):88-90.
[6]管锋,周传喜,易先中,骆广.基于SolidW orks三曲柄单环减速器三维建模及环板的有限元分析[J].煤矿机械,2013,34(03):265-267.
[7]杨树川,邵金龙,杨术明,等.基于SolidW orks&SimMechanics的机构运动分析与仿真[J].河北工业科技,2011,28(4):221-225.
[8]李大磊,赵玉奇,张志林.SolidW orks高级功能与工程应用[M].北京:北京邮电大学出版社,2009.
[2]张军,李宪华.基于COSMOSMotion的凸轮推杆机构运动仿真[J].煤矿机械,2006,27(9):103-105.
[3]张海燕,韩丽娜.基于COSMOSMotion的偏心齿轮机构运动仿真[J].包装工程,2007,28(12):147-149.
[4]王秀玲.基于SolidW orks的齿轮三维造型方法研究[J].机械设计与制造,2006,44(4):93-94.
[5]薛辰.基于SolidW orks的齿轮三维设计的方法的研究[J].机电产品开发与创新,2010,23(3):88-90.
[6]管锋,周传喜,易先中,骆广.基于SolidW orks三曲柄单环减速器三维建模及环板的有限元分析[J].煤矿机械,2013,34(03):265-267.
[7]杨树川,邵金龙,杨术明,等.基于SolidW orks&SimMechanics的机构运动分析与仿真[J].河北工业科技,2011,28(4):221-225.
[8]李大磊,赵玉奇,张志林.SolidW orks高级功能与工程应用[M].北京:北京邮电大学出版社,2009.