车门滚边参数对板件波浪系数与伸缩量的影响
|
摘要
滚边作为车门成型的最后一道工序,其质量不仅对车门边缘外观有影响,还对汽车整体外形尺寸精度有很大影响。对车门滚边过程中滚边参数(滚轮直径、预滚边第一道次TCP-RCP值、预滚边第二道次TCP-RCP值)对板件表面波浪系数和伸缩量的影响进行了研究。依据正交试验的方法设置几组不同滚边参数模型进行滚边仿真,得到不同组之间板件的波浪系数以及伸缩量并进行对比分析。通过分析发现,预滚边第一道次TCP-RCP值对板件波浪系数影响较大,预滚边第二道次TCP-RCP值对板件伸缩量影响较大。并在最后提出优选方案,为以后的实际应用提供了参考。
As the last step of the car door stamping forming,the robotic roller hemming has significant impact on the appearance forming quality of the door and overall dimensional accuracy of automobile. In this paper,the influence of the roller hemming parameters( Roller diameter,Pre-hem the first pass TCP-RCP value and Pre-hem the second pass TCP-RCP value)on wave coefficients and amount of stretching during the process of door roller hemming is studied. According to the orthogonal expermental method,several groups of different roller hemming parameter models are set up to simulate the roller hemming,then the wave coefficients and the amount of stretching of the plate between different groups are obtained,compared and analyzed. The results show that different roller hemming parameters have different influence degree on the wave coefficient and amount of stretching after roller hemming. Finally,the optimal scheme is proposed,which can be a good reference to the practical application.
As the last step of the car door stamping forming,the robotic roller hemming has significant impact on the appearance forming quality of the door and overall dimensional accuracy of automobile. In this paper,the influence of the roller hemming parameters( Roller diameter,Pre-hem the first pass TCP-RCP value and Pre-hem the second pass TCP-RCP value)on wave coefficients and amount of stretching during the process of door roller hemming is studied. According to the orthogonal expermental method,several groups of different roller hemming parameter models are set up to simulate the roller hemming,then the wave coefficients and the amount of stretching of the plate between different groups are obtained,compared and analyzed. The results show that different roller hemming parameters have different influence degree on the wave coefficient and amount of stretching after roller hemming. Finally,the optimal scheme is proposed,which can be a good reference to the practical application.
引文
[1]戴明峰.论汽车冲压外覆盖件质量管理[J].科技创新与应用,2013(2):53-54.
[2]陈小龙.汽车覆盖件模具用斜楔和包边机构CAE分析及优化设计[D].天津:天津理工大学,2014.
[3]郭婷婷.汽车天窗滚边工艺仿真分析及实验研究[D].合肥:合肥工业大学,2016.
[4]韩金娥.汽车铝合金前盖滚边工艺仿真研究及实验验证[D].合肥:合肥工业大学,2017.
[5] Li,S.Cyclic hardening behavior of roller hemming in the case of aluminumalloy sheets[J]. Materials&Design,2011,32(4):2308-2316.
[6]卢鹏.铝合金车身覆盖件滚边过程仿真与工艺参数优化[D].广州:华南理工大学,2015.
[7]丁源.ABAQUS6.14中文版有限元分析从入门到精通[M].北京:清华大学出版社,2016.
[2]陈小龙.汽车覆盖件模具用斜楔和包边机构CAE分析及优化设计[D].天津:天津理工大学,2014.
[3]郭婷婷.汽车天窗滚边工艺仿真分析及实验研究[D].合肥:合肥工业大学,2016.
[4]韩金娥.汽车铝合金前盖滚边工艺仿真研究及实验验证[D].合肥:合肥工业大学,2017.
[5] Li,S.Cyclic hardening behavior of roller hemming in the case of aluminumalloy sheets[J]. Materials&Design,2011,32(4):2308-2316.
[6]卢鹏.铝合金车身覆盖件滚边过程仿真与工艺参数优化[D].广州:华南理工大学,2015.
[7]丁源.ABAQUS6.14中文版有限元分析从入门到精通[M].北京:清华大学出版社,2016.