基于CC2540的锌烟除尘监控系统
|
摘要
针对传统热浸镀锌工业中锌烟除尘监控实时性低的问题,提出一种基于蓝牙单片机为控制器的锌烟除尘监控系统。该系统由下位机与上位机2部分构成。下位机主要是由CC2540蓝牙单片机与各检测传感器及相关电路组成,上位机由手机APP端与触摸屏2部分组成。通过手机APP端或者触摸屏实现与CC2540蓝牙单片机的实时通信,达到除尘实时监控的目的。
Aiming at the poor in real-time for zinc dust removal monitoring system in traditional hot dip galvanizing industry,a zinc dust removal monitoring system based on bluetooth single chip controller is proposed. The system is divided into two parts: a lower sub-system and a upper sub-system. The lower sub-system is mainly composed of CC2540 bluetooth single chip and detection sensors and related circuits. The upper sub-system consists of two parts: mobile phone APP terminal and touch screen. The real-time interaction and communication with the CC2540 bluetooth MCU is realized through the mobile APP or touch screen to achieve the purpose of real-time monitoring and dust removal.
Aiming at the poor in real-time for zinc dust removal monitoring system in traditional hot dip galvanizing industry,a zinc dust removal monitoring system based on bluetooth single chip controller is proposed. The system is divided into two parts: a lower sub-system and a upper sub-system. The lower sub-system is mainly composed of CC2540 bluetooth single chip and detection sensors and related circuits. The upper sub-system consists of two parts: mobile phone APP terminal and touch screen. The real-time interaction and communication with the CC2540 bluetooth MCU is realized through the mobile APP or touch screen to achieve the purpose of real-time monitoring and dust removal.
引文
[1]霍明亮,黄晓群.热浸镀锌钢铁件涂装前表面处理工艺研究[J].涂料工业,2017,47(9):70-74.
[2]张南.镀锌烟尘吸出与净化[C]//第10届中国热浸镀学术技术交流会暨节能减排新技术推介会论文集.[S.l.]:中国腐蚀与防护学会、中国表面工程协会、北京腐蚀与防护学会、河北省冶金学会、先进金属材料涂镀国家工程实验室,2014:3.
[3]王四代,马峥,汤顺祥,等.箱式布袋脉冲除尘PLC过程控制系统设计应用[J].中国锰业,2011,29(4):39-42.
[4]王好民,惠勇.布袋式除尘器在热镀锌生产中的应用[J].钢管,1994(4):50-51.
[5]汤培京,李英,甄文鹏.浅析脉冲除尘器在GMP车间的应用[J].科技与企业,2014(3):288.
[6]李丽兰.基于CC2540的手机APP车辆监控系统[J].单片机与嵌入式系统用,2016,16(4):52-55.
[7]袁帅,韩啸,李建宇.Pt100型铂电阻温度传感器测量结果不确定度评定[J].科技风,2018(27):190-194.
[8]胡建国,罗勇武.基于RS485的单片机和变频器通信控制多电机研究[J].机床与液压,2013,41(22):139-141.
[9]串口液晶屏在医疗器械和美容器械方面的应[EB/OL].[2018-05-06].https://club.1688.com/article/27563014.html.
[10]高明华,王诗尧,许丽金,等.基于手机APP的蓝牙通信智能车设计[J].井冈山大学学报(自然科学版),2017,38(5):55-58.
[2]张南.镀锌烟尘吸出与净化[C]//第10届中国热浸镀学术技术交流会暨节能减排新技术推介会论文集.[S.l.]:中国腐蚀与防护学会、中国表面工程协会、北京腐蚀与防护学会、河北省冶金学会、先进金属材料涂镀国家工程实验室,2014:3.
[3]王四代,马峥,汤顺祥,等.箱式布袋脉冲除尘PLC过程控制系统设计应用[J].中国锰业,2011,29(4):39-42.
[4]王好民,惠勇.布袋式除尘器在热镀锌生产中的应用[J].钢管,1994(4):50-51.
[5]汤培京,李英,甄文鹏.浅析脉冲除尘器在GMP车间的应用[J].科技与企业,2014(3):288.
[6]李丽兰.基于CC2540的手机APP车辆监控系统[J].单片机与嵌入式系统用,2016,16(4):52-55.
[7]袁帅,韩啸,李建宇.Pt100型铂电阻温度传感器测量结果不确定度评定[J].科技风,2018(27):190-194.
[8]胡建国,罗勇武.基于RS485的单片机和变频器通信控制多电机研究[J].机床与液压,2013,41(22):139-141.
[9]串口液晶屏在医疗器械和美容器械方面的应[EB/OL].[2018-05-06].https://club.1688.com/article/27563014.html.
[10]高明华,王诗尧,许丽金,等.基于手机APP的蓝牙通信智能车设计[J].井冈山大学学报(自然科学版),2017,38(5):55-58.