基于PTC Creo的环形防喷器Top-down设计
|
摘要
为实现防喷器参数化和系列化设计,提升设计质量和效率,在PTC Creo软件平台上,运用Top-down方法设计球形胶芯环形防喷器。通过概念设计、骨架模型设计和组装设计,实现设计参数从顶层(布局)向底层(模型)的无缝传递,进而实现设计参数对模型几何的控制。利用PTC Mathcad软件完成防喷器设计计算并与PTC Creo进行数据交换。在此基础上,通过建立参数表实现对35 MPa的某系列球形胶芯环形防喷器系列化设计。设计表明,Top-down方法具有更高的效率,更易于参数的修改,更有利于系列化产品的快速开发。
In order to realize the parametric and seriation design of preventer, and improve the design quality and efficiency, the ball type rubber core annular blowout preventer was designed using the Top-down design method in the PTC Creo software platform.design parameters was transferred seamless from the top(layout) to the underlying(model), thus the design parameters control the model geometry was realized.The calculation of preventer was completed by PTC Mathcad software and exchange data with PTC Creo.Series design was realized on the 35 MPa ball type rubber core annular blowout preventer through the establishment of parameter list.The design results showed that the Top-down design method had higher efficiency and easy parameter modification, which was more conducive to the rapid development of series products.
In order to realize the parametric and seriation design of preventer, and improve the design quality and efficiency, the ball type rubber core annular blowout preventer was designed using the Top-down design method in the PTC Creo software platform.design parameters was transferred seamless from the top(layout) to the underlying(model), thus the design parameters control the model geometry was realized.The calculation of preventer was completed by PTC Mathcad software and exchange data with PTC Creo.Series design was realized on the 35 MPa ball type rubber core annular blowout preventer through the establishment of parameter list.The design results showed that the Top-down design method had higher efficiency and easy parameter modification, which was more conducive to the rapid development of series products.
引文
[1]中国石油集团公司井控培训教材编写组.钻井井控设备[M].东营:中国石油大学出版社,2008.
[2]GB 150.3—2011压力容器第三部分:设计[S].
[3]SY/T 5127—2002井口装置和采油树规范[S].
[4]HG 2292—1992环形防喷器胶芯[S].
[5]GB/T 20174—2006石油天然气工业钻井和采油设备钻通设备[S].
[6]马晓峰,丁源.Creo Parametric中文版从入门到精通[M].北京:清华大学出版社,2013.
[7]孙振刚.防喷器参数化设计及仿真技术研究[D].东营:中国石油大学,2009.
[8]程艳.环形防喷器设计的几个要点分析[J].钻采工艺,2005,28(5):82-84.
[9]刘全坤,刘克素,王雷刚,等.支持Top-down设计的冲裁模装配图设计[J].机械工程学报,2001,37(12):94-96.
[10]刘计娟.基于Top-Down设计的装配模型建模方法研究[D].常州:河海大学,2007.
[11]邓平.基于三维的机械系统Top-down设计关键技术[D].长沙:国防科学技术大学,2011.
[12]冯方,潘慧,胡国军.基于PRO/E主控零件的产品设计[J].机械设计,2011,28(6):12-14.
[13]王冬雪,赵荣军,孟庆荣.FHZ28-105环形防喷器的研制[J].机械设计,2013,30(3):99-101.
[2]GB 150.3—2011压力容器第三部分:设计[S].
[3]SY/T 5127—2002井口装置和采油树规范[S].
[4]HG 2292—1992环形防喷器胶芯[S].
[5]GB/T 20174—2006石油天然气工业钻井和采油设备钻通设备[S].
[6]马晓峰,丁源.Creo Parametric中文版从入门到精通[M].北京:清华大学出版社,2013.
[7]孙振刚.防喷器参数化设计及仿真技术研究[D].东营:中国石油大学,2009.
[8]程艳.环形防喷器设计的几个要点分析[J].钻采工艺,2005,28(5):82-84.
[9]刘全坤,刘克素,王雷刚,等.支持Top-down设计的冲裁模装配图设计[J].机械工程学报,2001,37(12):94-96.
[10]刘计娟.基于Top-Down设计的装配模型建模方法研究[D].常州:河海大学,2007.
[11]邓平.基于三维的机械系统Top-down设计关键技术[D].长沙:国防科学技术大学,2011.
[12]冯方,潘慧,胡国军.基于PRO/E主控零件的产品设计[J].机械设计,2011,28(6):12-14.
[13]王冬雪,赵荣军,孟庆荣.FHZ28-105环形防喷器的研制[J].机械设计,2013,30(3):99-101.