激光表面织构化对材料摩擦学性能影响的研究进展
|
摘要
总结了激光表面织构化技术的特点,并介绍了其在摩擦学中应用的现状,分别讨论了激光表面织构的不同几何形状、尺寸和织构密度等因素,以及织构引起的金属材料表面硬度的升高对摩擦学性能的影响,展望了激光表面织构化技术未来的研究和发展方向及应用领域,指出应加强理论模拟和计算研究,以期与实验研究相辅相成;实验研究应注重规律的摸索和总结;机理方面应深入研究织构引起的组织和力学性能变化的规律,及其对材料摩擦学性能、力学性能和化学性能的影响。
The characteristics of laser surface texturing(LST)technique are summarized,and LST technique application in tribology is introduced.The effect of parameters about the geometrical shape,size,texture density of laser surface texture,and the hardness increase of metal material surface caused by LST on friction performance are discussed respectively.The future research,development and application field of LST technique are pointed out.The theoretical simulation and calculation to complement the experimental study should be enhanced.Experimental study should focus on exploration and summary of laws,while mechanism study should further investigate the changes of microstructure and mechanical properties caused by texture,and the effects on tribological properties,mechanical properties and chemical properties of the materials caused by texture.
The characteristics of laser surface texturing(LST)technique are summarized,and LST technique application in tribology is introduced.The effect of parameters about the geometrical shape,size,texture density of laser surface texture,and the hardness increase of metal material surface caused by LST on friction performance are discussed respectively.The future research,development and application field of LST technique are pointed out.The theoretical simulation and calculation to complement the experimental study should be enhanced.Experimental study should focus on exploration and summary of laws,while mechanism study should further investigate the changes of microstructure and mechanical properties caused by texture,and the effects on tribological properties,mechanical properties and chemical properties of the materials caused by texture.
引文
1 Liu Jianping,Yang Xiaomin,Zhong Huajun,et al.Fabrication of HDPE super hydrophobic surface by thermal micromolding[J].Chemistry,2010,73(11):1041(in Chinese).刘建平,杨晓敏,钟铧均,等.基于热模塑法制备HDPE仿生超疏水表面[J].化学通报,2010,73(11):1041.
2 Liang Shan,Chen Miao.Preparation of patterned TiO2thin films[J].Progress Chem,2008,20(11):1659(in Chinese).梁山,陈淼.图案化TiO2薄膜的制备技术[J].化学进展,2008,20(11):1659.
3 Yang Jiahong,Zhou Ming,Yan Feng,et al.Study on micro/nanoscale surface structure machnining technology[J].New Technol New Process,2007(5):110(in Chinese).杨加宏,周明,言峰,等.微纳表面结构加工技术研究[J].新技术新工艺,2007(5):110.
4 Wang Hai,Chu Jiaru,Zhao Gang.Progress of scanning probe lithography and study on scanning plasma etching technology[J].Micronanoelectron Technol,2003,40(7):177(in Chinese).王海,褚家如,赵钢.扫描探针加工技术的新进展及扫描等离子体加工技术的研究[J].微纳电子技术,2003,40(7):177.
5 Fu Jianyu,Chen Dapeng,Ye Tianchun.Study on electrothermally actuated cantilever array for nanolithography[J].Sci China,2010,53(5):1184.
6 Jiang Hongkui,Lu Shuang.Mechanism and development fo dip-pen nanolithography(DPN)[J].Eng Sci,2008(3):45.
7 Jiang Hongkui,Yao Tangwei,Hu Liguang,et al.Mechanism and development of dip-pen nanolithography(DPN)[J].Eng Sci,2008,10(7):173(in Chinese).蒋洪奎,姚汤伟,胡礼广,等.蘸水笔刻蚀技术(DPN)的机理与进展[J].中国工程科学,2008,10(7):173.
8 Shou Sha.Analysis of influence factors of dip-pen nanolithography[J].Surf Technol,2007,36(2):6(in Chinese).寿莎.蘸水笔刻蚀技术(DPN)影响因素分析[J].表面技术,2007,36(2):6.
9 Wei Wei,Liu Jingcheng,Li Hu,et al.Developent and application of microeletrinic photoresist[J].Prog Chem,2014,26(11):1867(in Chinese).魏玮,刘敬成,李虎,等.微电子光致抗蚀剂的发展及应用[J].化学进展,2014,26(11):1867.
10 Wang Xuemeng,Zhao Ruqiang,Shen Hui,et al.Laser surface texturation of multicrystalline silicon for solar cell[J].Laser Optoelectron Process,2010,47(1):1(in Chinese).王学孟,赵汝强,沈辉,等.用于太阳能电池的多晶硅激光表面织构化研究[J].激光与光电子学进展,2010,47(1):1.
11 Wang Yingmin,Cheng Zexiu,Li Qinghua,et al.A new progess for surface texture of multicrystalline silicon[J].Acta Optica Sinica,2011,31(12):1(in Chinese).王应民,程泽秀,李清华,等.多晶硅表面织构化新工艺的研究[J].光学学报,2011,31(12):1.
12 Dong Zhiwei,Wan Yong,Tu Tingting,et al.Tribological performance of stearic acid film on textured 45#steel substrate[J].Tribology,2014,34(1):1(in Chinese).董志伟,万勇,屠婷婷,等.45#钢表面织构上硬脂酸薄膜减摩性能的研究[J].摩擦学学报,2014,34(1):1.
13 Hu Tianchang,Hu Litian,Ding Qi.Tribological properties of laser textured surfaces of 45#steel under dry friction[J].Tribology,2010,30(1):46(in Chinese).胡天昌,胡丽天,丁奇.45#钢表面激光织构化及其干摩擦特性研究[J].摩擦学学报,2010,30(1):46.
14 Hu Tianchang,Ding Qi,Hu Litian.The effect of laser texturing of GCr15steel surfaces on their tribological properties[J].Tribology,2011,31(5):447(in Chinese).胡天昌,丁奇,胡丽天.激光表面织构化对GCr15钢摩擦磨损性能的影响[J].摩擦学学报,2011,31(5):447.
15 Yang Changjian.Experimental research on sliding anti-wear ability of the bionic non-smooth surface and numerical simulation[D].Changchun:Jilin University,2005(in Chinese).杨常建.仿生非光滑表面滑动耐磨性试验及数值模拟[D].长春:吉林大学,2005.
16 Yang Z J,Han Z W,Ren L Q.Friction and wear behavior of bionic non-smooth surfaces at high temperature[J].Tribology,2005,25(4):374(in Chinese).杨卓娟,韩志武,任露泉.激光处理凹坑形仿生非光滑表面试件的高温摩擦磨损特性研究[J].摩擦学学报,2005,25(4):374.
17 Andersson P,Koskinen J,Varjus S,et al.Microlubrication effect by laser-textured steel surfaces[J].Wear,2007,262(3):369.
18 Wan Yi.Study on surface texturing and alloying technology improving tribological properties of seal material[D].Nanjing:Nanjing University of Science and Technology,2008(in Chinese).万轶.表面织构与合金化改善密封材料摩擦学性能研究[D].南京:南京理工大学,2008.
19 Dong Huifang,Liu Kun,Wang Wei,et al.Laser textured shaft surfaces on the pumping action and frictional properties of lip seals[J].Tribology,2012,32(2):126(in Chinese).董慧芳,刘焜,王伟,等.激光加工微凹坑轴表面对唇形密封泵吸及摩擦特性的影响[J].摩擦学学报,2012,32(2):126.
20 Lu Wenfei,Fang Liang.Tribological properties of steel surface textured by laser under lubrication[J].Tribology,2009,29(1):1(in Chinese).吕文斐,方亮.润滑条件下激光加工纹理的摩擦磨损[J].摩擦学学报,2009,29(1):1.
21 Qin Liguo,Lin Ping,Zhang Yali,et al.Influence of surface wettability on the tribological properties of laser textured Co-Cr-Mo alloy in aqueous bovine serum albumin solution[J].Appl Surf Sci,2013,268:79.
22 Dawit Zenebe Segu,Si Geun Choi,Jae hyouk Choi,et al.The effect of multi-scale laser textured surface on lubrication regime[J].Appl Surf Sci,2013,270:58.
23 Wang Ze,Zhou Ming,Tan Heng,et al.Friction and wear behavior of 316L stainless steel with Laser micro-hole texture and microsquare-column array texture[J].J Mater Prot,2012,45(12):57(in Chinese).王泽,周明,谈衡,等.316L不锈钢表面不同微孔和微方柱时的减摩耐磨性能[J].材料保护,2012,45(12):57.
24 Chen Xiuxiang,Xu Yani,Wang Ze.et al.Study of micro-hole and micro-grating on antifriction performance of 316Lstainless steel surface[J].Foundry Technol,2012,33(11):1283(in Chinese).陈修祥,徐娅妮,王泽,等.微孔和微光栅对316L不锈钢表面减摩性能的实验研究[J].铸造技术,2012,33(11):1283.
25 Wang Bin,Chang Qiuyiing,Qi Ye.Effect of laser surface texture on the tribological properties of different materials under dry friction[J].Tribology,2014,34(4):408(in Chinese).王斌,常秋英,齐烨.激光表面织构对不同材料干摩擦特性的影响[J].摩擦学学报,2014,34(4):408.
26 Vilhena L M,Sedlacek M,Podgornik B,et al.Surface texturing by pulsed Nd∶YAG laser[J].Tribol Int,2009,42:1496.
27 Min-soo Suh,Young-hun Chae,Seock-sam Kim,et al.Effect of geometrical parameters in micro-grooved crosshatch pattern under lubricated sliding friction[J].Tribol Int,2010,43:1508.
28 Wang Ze,Chen Xiuxiang,Tan Heng,et al.Effect of laser textured surface on friction characteristics of 316lstainless steel[J].Foundry Technol,2012,33(10):1159(in Chinese).王泽,陈修祥,谈衡,等.激光织构化对316L不锈钢表面摩擦特性的影响[J].铸造技术,2012,33(10):1159.
29 Yuan Run,Cheng Yunrong,Fu Yonghong,et al.Influence of iaser surface texturing on tribological performance of ductile cast iron under line contact collditions[J].J Jiangsu University(Nat Sci Ed),2013,34(4):450(in Chinese).袁润,程云荣,符永宏,等.线接触副球墨铸铁表面激光织构对摩擦学特性的影响[J].江苏大学学报(自然科学版),2013,34(4):450.
30 Surya P Mishra,Andreas A Polycarpou.Tribological studies of unpolished laser surface textures under starved lubrication conditions for use in air-conditioning and refrigeration compressors[J].Tribol Int,2011,44:1890.
31 Lian Feng,Zhang Huichen,Pang Lianyun.Laser texture manufacturing on Ti6Al4Vsurface and its dry tribological characteristics dry tribological characteristics[J].Lubricat Eng,2011,36(9):1(in Chinese).连峰,张会臣,庞连云.Ti6Al4V表面激光织构化及其干摩擦特性研究[J].润滑与密封,2011,36(9):1.
32 Sha Dong.Tribological properties of laser textured surfaces of Ti6Al4V[D].Dalian:Dalian Maritime University,2011(in Chinese).沙东.Ti6Al4V表面激光织构化及其摩擦学特性研究[D].大连:大连海事大学,2011.
33 Wang Xiaolei,Koji Kato,Koshi Adachi,et al.The effect of laser texturing of SiC surface on the critical load for the transition of water lubrication mode from hydrodynamic to mixed[J].Tribol Int,2001,34:703.
34 ManelRodríguez Ripoll,Roc Simic,Josef Brenner,et al.Friction and lifetime of laser surface-textured and MoS2-coated Ti6Al4Vunder dry reciprocating sliding[J].Tribol Lett,2003,51:261.
35 Zhang Baosen,Zhang Kai,Zhou Hengzhi.Friction reduction and anti-wear performance of Mo2film coated on laser textured surface[J].Hot Work Technol,2015,44(2):150(in Chinese).张保森,张凯,周衡志.激光织构化表面MoS2薄膜的减摩抗磨性能[J].热加工工艺,2015,44(2):150.
36 Li Jianliang,Xiong Dangsheng,Dai Jihui,et al.Effect of surface laser texture on friction properties of nickel-based composite[J].Tribol Int,2010,43:1193.
37 Dawit Zenebe Segu,Jong-Hyoung Kim,Si Geun Choi,et al.Application of taguchi techniques to study friction and wear properties of MoS2coatings deposited on laser textured surface[J].Surf Coat Technol,2013,232:504.
38 Xing Youqiang,Deng Jianxin,Wu Ze,et al.Effect of regular surface textures generated by laser on tribological behavior of Si3N4/TiC ceramic[J].Appl Surf Sci,2013,265:823.
39 Liu Xianlan,Shao Jinzhong,Jin Xiaoming.Influence factors of wear resistance with bionic non-smooth surfaces[J].Surf Technol,2012,41(1):92(in Chinese).刘先兰,邵锦钟,金潇明.仿生非光滑表面耐磨性的影响因素[J].表面技术,2012,41(1):92.
40 Han Zhiwu,Ren Luquan,Liu Zubin.Investigation on anti-wear ability of bionic nonsmooth surfaces made by laser texturing[J].Tribology,2004,24(4):289(in Chinese).韩志武,任露泉,刘祖斌.激光织构仿生非光滑表面抗磨性能研究[J].摩擦学学报,2004,24(4):289.
41 Qi Yanchang,Ma Chengyong,Peng Yun,et al.Study of abrasive wear resistance of bionics non-smooth topography on roller surface made by laser carving technology[J].Appl Laser,2006,26(1):1(in Chinese).齐彦昌,马成勇,彭云,等.轧辊表面激光雕刻仿生非光滑形态耐磨性研究[J].应用激光,2006,26(1):1.
42 Auezhan Amanov,Ryo Tsuboi,Hironobu Oe,et al.The influence of bulges produced by laser surface texturing on the sliding friction and wear behavior[J].Tribol Int,2013,60:216.
43 Rapoport L,Moshkovich A,Perfilyev V,et al.Friction and wear of MoS2films on laser textured steel surfaces[J].Surf Coat Technol,2008,202:3332.
44 Manabu Wakuda,Yukihiko Yamauchi,Shuzo Kanzaki,et al.Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact[J].Wear,2003,254:356.
45 Voevodin A A,Zabinski J S.Laser surface texturing for adaptive solid lubrication[J].Wear,2006,261:1285.
46 Shum P W,Zhou Z F,Li K Y.To increase the hydrophobicity and wear resistance of diamond-like carbon coatings by surface texturing using laser ablation process[J].Thin Solid Films,2013,544:472.
47 Beomkeun Kim,Young Hun Chae,Heung Soap Choi.Effects of surface texturing on the frictional behavior of cast iron surfaces[J].Tribol Int,2014,70:128.
48 Ge Hanqing.Research on discriminating partition laser surface micro-texturing technology of engine cylinder[D].Zhenjiang:Jiangsu University,2014(in Chinese).葛汉青.发动机气缸内孔分区异化激光微织构技术研究[D].镇江:江苏大学,2014.
49 Qiu Y,Khonsari M M.Experimental investigation of tribological performance of laser textured stainless steel rings[J].Tribol Int,2011,44:635.
50 Hua Xijun,Wu Jinquan,Liu Ming,et al.Study on the rolling friction properties of the laser textured surface under solid lubrication condition[J].Lubricat Eng,2013,38(3):23(in Chinese).华希俊,吴锦泉,刘明,等.激光织构表面固体润滑滚动摩擦特性研究[J].润滑与密封,2013,38(3):23.
51 Wang Bin,Chang Qiuying,Qi Ye.Tribological properties of laster textured surfaces on 45steel under dry friction[J].Lubricat Eng,2013,38(12):11(in Chinese).王斌,常秋英,齐烨.激光表面织构对45#钢干摩擦特性的影响[J].润滑与密封,2013,38(12):11.
52 Song Q F,Zhou H,Li Y,et al.Friction and wear properties of castiron material with bionic non-smooth surface undernormal temperature[J].Tribology,2006,26(1):24(in Chinese).宋起飞,周宏,李跃,等.仿生非光滑表面铸铁材料的常温摩擦磨损性能[J].摩擦学学报,2006,26(1):24.
53 Christophe Vincent,Guy Monteil,Thierry Barriere,et al.Control of the quality of laser surface texturing[J].Microsyst Technol,2008,14(9-11):1553.
2 Liang Shan,Chen Miao.Preparation of patterned TiO2thin films[J].Progress Chem,2008,20(11):1659(in Chinese).梁山,陈淼.图案化TiO2薄膜的制备技术[J].化学进展,2008,20(11):1659.
3 Yang Jiahong,Zhou Ming,Yan Feng,et al.Study on micro/nanoscale surface structure machnining technology[J].New Technol New Process,2007(5):110(in Chinese).杨加宏,周明,言峰,等.微纳表面结构加工技术研究[J].新技术新工艺,2007(5):110.
4 Wang Hai,Chu Jiaru,Zhao Gang.Progress of scanning probe lithography and study on scanning plasma etching technology[J].Micronanoelectron Technol,2003,40(7):177(in Chinese).王海,褚家如,赵钢.扫描探针加工技术的新进展及扫描等离子体加工技术的研究[J].微纳电子技术,2003,40(7):177.
5 Fu Jianyu,Chen Dapeng,Ye Tianchun.Study on electrothermally actuated cantilever array for nanolithography[J].Sci China,2010,53(5):1184.
6 Jiang Hongkui,Lu Shuang.Mechanism and development fo dip-pen nanolithography(DPN)[J].Eng Sci,2008(3):45.
7 Jiang Hongkui,Yao Tangwei,Hu Liguang,et al.Mechanism and development of dip-pen nanolithography(DPN)[J].Eng Sci,2008,10(7):173(in Chinese).蒋洪奎,姚汤伟,胡礼广,等.蘸水笔刻蚀技术(DPN)的机理与进展[J].中国工程科学,2008,10(7):173.
8 Shou Sha.Analysis of influence factors of dip-pen nanolithography[J].Surf Technol,2007,36(2):6(in Chinese).寿莎.蘸水笔刻蚀技术(DPN)影响因素分析[J].表面技术,2007,36(2):6.
9 Wei Wei,Liu Jingcheng,Li Hu,et al.Developent and application of microeletrinic photoresist[J].Prog Chem,2014,26(11):1867(in Chinese).魏玮,刘敬成,李虎,等.微电子光致抗蚀剂的发展及应用[J].化学进展,2014,26(11):1867.
10 Wang Xuemeng,Zhao Ruqiang,Shen Hui,et al.Laser surface texturation of multicrystalline silicon for solar cell[J].Laser Optoelectron Process,2010,47(1):1(in Chinese).王学孟,赵汝强,沈辉,等.用于太阳能电池的多晶硅激光表面织构化研究[J].激光与光电子学进展,2010,47(1):1.
11 Wang Yingmin,Cheng Zexiu,Li Qinghua,et al.A new progess for surface texture of multicrystalline silicon[J].Acta Optica Sinica,2011,31(12):1(in Chinese).王应民,程泽秀,李清华,等.多晶硅表面织构化新工艺的研究[J].光学学报,2011,31(12):1.
12 Dong Zhiwei,Wan Yong,Tu Tingting,et al.Tribological performance of stearic acid film on textured 45#steel substrate[J].Tribology,2014,34(1):1(in Chinese).董志伟,万勇,屠婷婷,等.45#钢表面织构上硬脂酸薄膜减摩性能的研究[J].摩擦学学报,2014,34(1):1.
13 Hu Tianchang,Hu Litian,Ding Qi.Tribological properties of laser textured surfaces of 45#steel under dry friction[J].Tribology,2010,30(1):46(in Chinese).胡天昌,胡丽天,丁奇.45#钢表面激光织构化及其干摩擦特性研究[J].摩擦学学报,2010,30(1):46.
14 Hu Tianchang,Ding Qi,Hu Litian.The effect of laser texturing of GCr15steel surfaces on their tribological properties[J].Tribology,2011,31(5):447(in Chinese).胡天昌,丁奇,胡丽天.激光表面织构化对GCr15钢摩擦磨损性能的影响[J].摩擦学学报,2011,31(5):447.
15 Yang Changjian.Experimental research on sliding anti-wear ability of the bionic non-smooth surface and numerical simulation[D].Changchun:Jilin University,2005(in Chinese).杨常建.仿生非光滑表面滑动耐磨性试验及数值模拟[D].长春:吉林大学,2005.
16 Yang Z J,Han Z W,Ren L Q.Friction and wear behavior of bionic non-smooth surfaces at high temperature[J].Tribology,2005,25(4):374(in Chinese).杨卓娟,韩志武,任露泉.激光处理凹坑形仿生非光滑表面试件的高温摩擦磨损特性研究[J].摩擦学学报,2005,25(4):374.
17 Andersson P,Koskinen J,Varjus S,et al.Microlubrication effect by laser-textured steel surfaces[J].Wear,2007,262(3):369.
18 Wan Yi.Study on surface texturing and alloying technology improving tribological properties of seal material[D].Nanjing:Nanjing University of Science and Technology,2008(in Chinese).万轶.表面织构与合金化改善密封材料摩擦学性能研究[D].南京:南京理工大学,2008.
19 Dong Huifang,Liu Kun,Wang Wei,et al.Laser textured shaft surfaces on the pumping action and frictional properties of lip seals[J].Tribology,2012,32(2):126(in Chinese).董慧芳,刘焜,王伟,等.激光加工微凹坑轴表面对唇形密封泵吸及摩擦特性的影响[J].摩擦学学报,2012,32(2):126.
20 Lu Wenfei,Fang Liang.Tribological properties of steel surface textured by laser under lubrication[J].Tribology,2009,29(1):1(in Chinese).吕文斐,方亮.润滑条件下激光加工纹理的摩擦磨损[J].摩擦学学报,2009,29(1):1.
21 Qin Liguo,Lin Ping,Zhang Yali,et al.Influence of surface wettability on the tribological properties of laser textured Co-Cr-Mo alloy in aqueous bovine serum albumin solution[J].Appl Surf Sci,2013,268:79.
22 Dawit Zenebe Segu,Si Geun Choi,Jae hyouk Choi,et al.The effect of multi-scale laser textured surface on lubrication regime[J].Appl Surf Sci,2013,270:58.
23 Wang Ze,Zhou Ming,Tan Heng,et al.Friction and wear behavior of 316L stainless steel with Laser micro-hole texture and microsquare-column array texture[J].J Mater Prot,2012,45(12):57(in Chinese).王泽,周明,谈衡,等.316L不锈钢表面不同微孔和微方柱时的减摩耐磨性能[J].材料保护,2012,45(12):57.
24 Chen Xiuxiang,Xu Yani,Wang Ze.et al.Study of micro-hole and micro-grating on antifriction performance of 316Lstainless steel surface[J].Foundry Technol,2012,33(11):1283(in Chinese).陈修祥,徐娅妮,王泽,等.微孔和微光栅对316L不锈钢表面减摩性能的实验研究[J].铸造技术,2012,33(11):1283.
25 Wang Bin,Chang Qiuyiing,Qi Ye.Effect of laser surface texture on the tribological properties of different materials under dry friction[J].Tribology,2014,34(4):408(in Chinese).王斌,常秋英,齐烨.激光表面织构对不同材料干摩擦特性的影响[J].摩擦学学报,2014,34(4):408.
26 Vilhena L M,Sedlacek M,Podgornik B,et al.Surface texturing by pulsed Nd∶YAG laser[J].Tribol Int,2009,42:1496.
27 Min-soo Suh,Young-hun Chae,Seock-sam Kim,et al.Effect of geometrical parameters in micro-grooved crosshatch pattern under lubricated sliding friction[J].Tribol Int,2010,43:1508.
28 Wang Ze,Chen Xiuxiang,Tan Heng,et al.Effect of laser textured surface on friction characteristics of 316lstainless steel[J].Foundry Technol,2012,33(10):1159(in Chinese).王泽,陈修祥,谈衡,等.激光织构化对316L不锈钢表面摩擦特性的影响[J].铸造技术,2012,33(10):1159.
29 Yuan Run,Cheng Yunrong,Fu Yonghong,et al.Influence of iaser surface texturing on tribological performance of ductile cast iron under line contact collditions[J].J Jiangsu University(Nat Sci Ed),2013,34(4):450(in Chinese).袁润,程云荣,符永宏,等.线接触副球墨铸铁表面激光织构对摩擦学特性的影响[J].江苏大学学报(自然科学版),2013,34(4):450.
30 Surya P Mishra,Andreas A Polycarpou.Tribological studies of unpolished laser surface textures under starved lubrication conditions for use in air-conditioning and refrigeration compressors[J].Tribol Int,2011,44:1890.
31 Lian Feng,Zhang Huichen,Pang Lianyun.Laser texture manufacturing on Ti6Al4Vsurface and its dry tribological characteristics dry tribological characteristics[J].Lubricat Eng,2011,36(9):1(in Chinese).连峰,张会臣,庞连云.Ti6Al4V表面激光织构化及其干摩擦特性研究[J].润滑与密封,2011,36(9):1.
32 Sha Dong.Tribological properties of laser textured surfaces of Ti6Al4V[D].Dalian:Dalian Maritime University,2011(in Chinese).沙东.Ti6Al4V表面激光织构化及其摩擦学特性研究[D].大连:大连海事大学,2011.
33 Wang Xiaolei,Koji Kato,Koshi Adachi,et al.The effect of laser texturing of SiC surface on the critical load for the transition of water lubrication mode from hydrodynamic to mixed[J].Tribol Int,2001,34:703.
34 ManelRodríguez Ripoll,Roc Simic,Josef Brenner,et al.Friction and lifetime of laser surface-textured and MoS2-coated Ti6Al4Vunder dry reciprocating sliding[J].Tribol Lett,2003,51:261.
35 Zhang Baosen,Zhang Kai,Zhou Hengzhi.Friction reduction and anti-wear performance of Mo2film coated on laser textured surface[J].Hot Work Technol,2015,44(2):150(in Chinese).张保森,张凯,周衡志.激光织构化表面MoS2薄膜的减摩抗磨性能[J].热加工工艺,2015,44(2):150.
36 Li Jianliang,Xiong Dangsheng,Dai Jihui,et al.Effect of surface laser texture on friction properties of nickel-based composite[J].Tribol Int,2010,43:1193.
37 Dawit Zenebe Segu,Jong-Hyoung Kim,Si Geun Choi,et al.Application of taguchi techniques to study friction and wear properties of MoS2coatings deposited on laser textured surface[J].Surf Coat Technol,2013,232:504.
38 Xing Youqiang,Deng Jianxin,Wu Ze,et al.Effect of regular surface textures generated by laser on tribological behavior of Si3N4/TiC ceramic[J].Appl Surf Sci,2013,265:823.
39 Liu Xianlan,Shao Jinzhong,Jin Xiaoming.Influence factors of wear resistance with bionic non-smooth surfaces[J].Surf Technol,2012,41(1):92(in Chinese).刘先兰,邵锦钟,金潇明.仿生非光滑表面耐磨性的影响因素[J].表面技术,2012,41(1):92.
40 Han Zhiwu,Ren Luquan,Liu Zubin.Investigation on anti-wear ability of bionic nonsmooth surfaces made by laser texturing[J].Tribology,2004,24(4):289(in Chinese).韩志武,任露泉,刘祖斌.激光织构仿生非光滑表面抗磨性能研究[J].摩擦学学报,2004,24(4):289.
41 Qi Yanchang,Ma Chengyong,Peng Yun,et al.Study of abrasive wear resistance of bionics non-smooth topography on roller surface made by laser carving technology[J].Appl Laser,2006,26(1):1(in Chinese).齐彦昌,马成勇,彭云,等.轧辊表面激光雕刻仿生非光滑形态耐磨性研究[J].应用激光,2006,26(1):1.
42 Auezhan Amanov,Ryo Tsuboi,Hironobu Oe,et al.The influence of bulges produced by laser surface texturing on the sliding friction and wear behavior[J].Tribol Int,2013,60:216.
43 Rapoport L,Moshkovich A,Perfilyev V,et al.Friction and wear of MoS2films on laser textured steel surfaces[J].Surf Coat Technol,2008,202:3332.
44 Manabu Wakuda,Yukihiko Yamauchi,Shuzo Kanzaki,et al.Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact[J].Wear,2003,254:356.
45 Voevodin A A,Zabinski J S.Laser surface texturing for adaptive solid lubrication[J].Wear,2006,261:1285.
46 Shum P W,Zhou Z F,Li K Y.To increase the hydrophobicity and wear resistance of diamond-like carbon coatings by surface texturing using laser ablation process[J].Thin Solid Films,2013,544:472.
47 Beomkeun Kim,Young Hun Chae,Heung Soap Choi.Effects of surface texturing on the frictional behavior of cast iron surfaces[J].Tribol Int,2014,70:128.
48 Ge Hanqing.Research on discriminating partition laser surface micro-texturing technology of engine cylinder[D].Zhenjiang:Jiangsu University,2014(in Chinese).葛汉青.发动机气缸内孔分区异化激光微织构技术研究[D].镇江:江苏大学,2014.
49 Qiu Y,Khonsari M M.Experimental investigation of tribological performance of laser textured stainless steel rings[J].Tribol Int,2011,44:635.
50 Hua Xijun,Wu Jinquan,Liu Ming,et al.Study on the rolling friction properties of the laser textured surface under solid lubrication condition[J].Lubricat Eng,2013,38(3):23(in Chinese).华希俊,吴锦泉,刘明,等.激光织构表面固体润滑滚动摩擦特性研究[J].润滑与密封,2013,38(3):23.
51 Wang Bin,Chang Qiuying,Qi Ye.Tribological properties of laster textured surfaces on 45steel under dry friction[J].Lubricat Eng,2013,38(12):11(in Chinese).王斌,常秋英,齐烨.激光表面织构对45#钢干摩擦特性的影响[J].润滑与密封,2013,38(12):11.
52 Song Q F,Zhou H,Li Y,et al.Friction and wear properties of castiron material with bionic non-smooth surface undernormal temperature[J].Tribology,2006,26(1):24(in Chinese).宋起飞,周宏,李跃,等.仿生非光滑表面铸铁材料的常温摩擦磨损性能[J].摩擦学学报,2006,26(1):24.
53 Christophe Vincent,Guy Monteil,Thierry Barriere,et al.Control of the quality of laser surface texturing[J].Microsyst Technol,2008,14(9-11):1553.