摘要
为了扩大原位测试技术在珠三角软土工程中的应用和验证用十字板剪切试验推算软土的抗剪强度指标计算方法的可行性,以珠海某软土填方边坡和广州南沙某基坑工程中软土原位测试与工程应用为例,开展了原位测试结果与室内指标的对比分析和成果应用效果分析。结果表明:原位测试能较好地反映软土的实际状态,用十字板剪切试验推算的软土抗剪强度参数值大于室内土工试验得到的参数值;在珠三角地区用《港口工程地基规范》(JTS 147-1—2010)中附录J方法推算得到的软土的黏聚力偏大,超出经验范围值,所以尚不宜直接用于工程设计。建议进一步对原位测试数据的应用开展相关理论研究,以扩大应用范围。
In order to expand the application of in-situ testing technology in soft soil projects in the Pearl River Delta and to verify the feasibility of using cross plate shear test result to calculate the shear strength of soft soil, we compared in-situ test results with indoor test results, and analyzed the application effects. We took the in-situ test and its engineering application in a soft soil fill slope in Zhuhai and a foundation pit engineering in Nansha, Guangzhou as engineering examples. Results unveil that in-situ test could well reflect the actual state of soft soil, and the shear strength parameter of soft soil calculated via vane shear test result is greater than those obtained by laboratory soil test. However,in Pearl River Delta region, the cohesion of soft soil calculated by method in Appendix J of Code for Foundation of Port Engineering(JTS 147-1—2010) exceeds empirical range, hence is not suitable for direct use in engineering design. We suggest that further theoretical research on the application of in-situ test data should be conducted to expand its application scope.
引文
[1] 赖琼华. 岩土变形模量取值研究[J]. 岩石力学与工程学报, 2001,20(增1): 1750-1754.
[2] 刘松玉,吴燕开.论我国静力触探技术(CPT)现状与发展[J]. 岩土工程学报,2004,26(4): 553-556.
[3] 刘松玉,邹海峰,蔡国军,等.基于CPTU的土分类方法在港珠澳大桥中的应用[J].岩土工程学报, 2017, 39(增2): 1- 4.
[4] 段伟,蔡国军,刘松玉,等.基于CPTU测试的港珠澳大桥砂土液化评价方法研究[J].岩土工程学报, 2017,39(增2):236-239.
[5] 闫澍旺,封晓伟,侯晋芳,等.用十字板强度推算.软黏土抗剪强度指标的方法及应用[J].岩土工程学报, 2009,31(12):1805-1810.
[6] 温勇,杨光华,汤连生,等.基于原位旁压试验的切线模量法及其初步验证[J]. 岩土工程学报, 2017, 39(增1): 121-125.
[7] 刘翔宇,杨光华,杨球玉,等. 旁压试验在深厚强风化花岗岩层中的应用[J]. 工程勘察, 2016, 44(7):31-36.
[8] 沈小克,蔡正银,蔡国军. 原位测试技术与工程勘察应用[J]. 土木工程学报,2016,49(2):98-120.
[9] 艾凯,徐兵,张计,等. 真空预压法在某泵站工程中的应用与研究[J].长江科学院院报,2005,22(5):52-54.
[10] 陈富强,杨光华,刘惠康,等.抛石反压法在某软土填方边坡中的成功应用[J]. 岩土工程学报, 2013,35(增2): 749-752.
[11] 李志云,杨光华,陈富强,等.利用十字板强度推算软土抗剪强度指标方法的探讨[J]. 广东水利水电, 2017,(12):38-41.
[12] 朱思军,杨光华,陈富强,等.十字板剪切试验在珠三角深厚软土基坑工程中的应用[J].广东水利水电, 2016,(6):28-33.