Ka波段一分六垂直过渡微带功分器的设计
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:Design of 1 to 6 Microstrip Power Divider with Vertical Transition Structure for Ka Band
  • 作者:赖昊翔 ; 潘威
  • 英文作者:LAI Haoxiang;PAN Wei;The 29th Research Institute of CETC;
  • 关键词:威尔金森功分器 ; 垂直过渡结构 ; 微带
  • 英文关键词:Wilkinson power divider;;Vertical transition;;Microstrip
  • 中文刊名:DZGY
  • 英文刊名:Electronics Process Technology
  • 机构:中国电子科技集团公司第二十九研究所;
  • 出版日期:2019-05-18
  • 出版单位:电子工艺技术
  • 年:2019
  • 期:v.40;No.275
  • 语种:中文;
  • 页:DZGY201903004
  • 页数:4
  • CN:03
  • ISSN:14-1136/TN
  • 分类号:19-22
摘要
提出了两种威尔金森功分器拓扑结构进行比较分析,选择了工程容易实现的结构方式。通过ADS工具计算出50Ω微带线波长及线宽等参数,在AutoCAD软件中绘制出DXF模型。之后将模型导入HFSS软件进行仿真,经过数次迭代仿真,得出性能良好垂直过渡输出的功分器。实物测试结果和仿真结果吻合,输入输出端口驻波比优于1.5,幅度一致性小于1 dB,隔离度大于15 dB,可以满足前端功率合成等应用。
        A better one is adopted between two kinds of Wilkinson power divider topologies after comparison and analysis.By using the tools of ADS software, the wavelength and width of the microstrip with specified impedance of 50 Ω can be obtained. Then the model of DXF type is designed by AutoCAD software. The model can be imported into project of HFSS. After several simulations, the PD with vertical transition output is completed. The tested results of the PD tally with the simulation results, the input and output VSWR is less than 1.5, the amplitude consistency is less than 1 dB,and the isolation between every two ports is greater than 15 dB. Therefore, this design can be used in power dividers or power combining applications in RF frond-end.
引文
[1]杜姗姗,杨青慧,张怀武.1~18 GHz超宽带功分器的设计[J].压电与声光,2017,39(4):498-500.
    [2]胡助明,赵利群,唐益民.一种宽带波束网络的设计[G]//2018年全国微波毫米波会议论文集(上册).上海:中国电子学会微波分会,2018:293-297.
    [3]徐洋,彭龙,张帅,等.微带一分五宽带Wilkinson功分器的设计与制作[J].火控雷达技术,2015,44(4):73-75.
    [4]清华大学(微带电路)编写组.微带电路[M].北京:人民邮电出版社,1976.
    [5]戴文,王芳,王雪菲.一种SAM多功能微波数字复合基板的设计与仿真电子工艺技术,2017,38(3):15-18.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700