钢铁零件常温磷化工艺的研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Study on Phosphating Process for Iron and Steel Parts at Room Temperature 作者：李立群 ; 曹永香 ; 唐庆平 英文作者：LI Liqun;CAO Yongxiang;TANG Qingping;AECC Zhongchuan Transmission Machinery Co.,Ltd.; 关键词：常温磷化 ; 外观 ; 耐蚀性 英文关键词：phosphating at room temperature;;appearance;;corrosion resistance 中文刊名：DDHB 英文刊名：Electroplating & Pollution Control 机构：中国航发中传机械有限公司; 出版日期：2019-05-30 出版单位：电镀与环保 年：2019 期：v.39;No.227 语种：中文; 页：DDHB201903020 页数：3 CN：03 ISSN：31-1507/X 分类号：54-56

摘要

为了解决钢铁零件在常温下进行磷化的问题,查找了有关技术资料,针对钢铁零件常温磷化工艺进行了多次试验。摸索出常温磷化液的配方及控制方法,确定了常温磷化的工艺参数,得到了外观及耐蚀性满足《钢铁零件磷化膜层质量检验》(HB 5063—1996)要求的磷化膜。
        In order to solve the problem of phosphating at room temperature for iron and steel parts, relevant technical datas has been searched and multiple experiments about phosphating at room temperature for iron and steel parts were carried out. The formula and control method of phosphating solution at room temperature were found, and the process parameters of phosphating at room temperature were determined. The appearance and corrosion resistance of the obtained phosphating film meet the requirements of "quality inspection of phosphating film for iron and steel parts"(HB 5063—1996).

引文

[1] 沈品华.现代电镀手册[M].北京:机械工业出版社,2011.
    [2] 张允诚,胡如南,向荣.电镀手册[M].北京:国防工业出版社,1997.