摘要
利用PCL(Patran Control Language)开发了集成于Patran2011的深沟球轴承有限元前处理程序,并利用该程序对某型号深沟球轴承进行了静力学特性分析。得到的轴承在各个接触点的最大接触应力、弹性趋近量以及整个轴承的变形与Hertz理论解误差均在10%以内,满足工程应用的要求。
This paper uses PCL to develop a FEA program of deep groove ball bearings in Patran2011.Using the secondary developed FEA program,this paper analyzes the static properties of ball bearings,and getting bearings' maximum contact stress in each contact point,the entire amount of elasticity and the entire bearing deformation.All the data are very close to the theoretical solution of Hertz. The error is within the scope of the project.
引文
[1]邓四二,贾群义.滚动轴承设计原理[M].北京:中国标准出版社,2008
[2]伍生,曹保民,杨默然.滚动轴承接触问题的有限元分析[J].制造业信息化,2007(6):70-72
[3]龙凯,贾长治,李宝峰.Patran2010与Nastran2010有限元分析从入门到精通[M].北京:机械工业出版社,2013,5
[4]申志彬,李磊,雷勇军,等.基于Patran二次开发的星形药柱几何参数灵敏度分析[J].长沙:国防科技大学学报,2010,32(4):25-29
[5]冈本纯三.球轴承的设计计算[M].黄志强,译.罗继伟,校.北京:机械工业出版社,2003
[6]段磊,陈晓阳,张涛.基于Nastran的球轴承接触问题有限元分析[J].轴承,2015(9):7-11