摘要
采用微弧沉积工艺,以Stellite6合金焊棒为沉积材料,在PCr Ni3Mo VA钢基体上多次沉积形成合金涂层,对涂层的形貌、元素组成、相组成、显微硬度和抗烧蚀性能进行了检测。结果表明:涂层与基体之间形成了良好的冶金结合,涂层致密,孔隙少,具有较好的耐磨性能和抗烧蚀性能。
Stellite6 coating was deposited on surface of PCrNi3MoVA steel by micro arc deposition coating technology.After deposited, the surface topography, element constitute phase composition, micro-hardness, and anti-erosion property of coating were tested. The testing results show that a better metallurgical bond between the coating and matrix is formed, and the coating has good densification, with few pores. At the same time, the abrasion performance and anti-erosion performance of coating are good.
引文
[1]王道宏.现代火炮工程实践[M].北京:国防工业出版社,1997.
[2]陈永才.国内外火炮身管延寿技术研究进展[J].兵工学报,2006(2):11-18.
[3]郭瑞萍,王宝生.美国炮管抗烧蚀涂层工艺技术新进展[J].新技术新工艺,2008(9):87-88.
[4]Bracuti A J,Field R.Wear reducing additives ADA410070[R].U.S.Army Armament Research,Development and Engineering Center,2002.
[5]曾晓雁,吴懿平.表面工程学[M].北京:机械工业出版社,2001:92-112.
[6]Lawton B.Thermo-chemical erosion in gun barrel[J].Wear,2001(251):827-838.
[7]蒋啸林.电爆炸喷涂技术提高火炮身管寿命的机理研究[D].北京:机械科学研究总院,2012.