提高铁精粉入烧配比的实践
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:PRACTICE TO RAISE IRON CONCENTRATE PROPORTION IN SINTERING
  • 作者:李旺 ; 甄常亮 ; 周永宁 ; 齐凤来 ; 秦玉杰
  • 英文作者:Li Wang;Zhen Changliang;Zhou Yongning;Qi Fenglai;Qin Yujie;Iron-Making Department,Hesteel Group Tangsteel Company;
  • 关键词:精粉 ; 烧结 ; 配比 ; 实践
  • 英文关键词:iron concentrate powder;;sintering;;proportion;;practice
  • 中文刊名:HBYJ
  • 英文刊名:Hebei Metallurgy
  • 机构:河钢集团唐钢公司炼铁部;
  • 出版日期:2017-03-28
  • 出版单位:河北冶金
  • 年:2017
  • 期:No.255
  • 语种:中文;
  • 页:HBYJ201703006
  • 页数:4
  • CN:03
  • ISSN:13-1172/TF
  • 分类号:31-34
摘要
为适应资源环境的变化,唐钢在2015年开始使用PMC公司生产的南非铁精粉替代巴卡粗粉,司营精粉和研山精粉替代澳矿粉,测算烧结工序铁精粉配比将提高10个百分点左右。针对铁精粉配比提高给烧结生产带来的影响,通过研究铁矿粉的基础特性,制定合理烧结矿成分控制基准,优化配混料以及布料设备参数等措施,实现了烧结铁精粉配比由24.48%提高到36.15%的预期目标,取得良好的生产效果。
        To adapt the change of resource environment,Tang Steel began in 2015 to use South Africa iron concentrate produced by PMC company to substitute Baca rough iron powder,Shiying and Yanshan iron concentrate to substitute Australia iron powder.The iron concentrate proportion rate in sintering was measured to rise about 10 percent.With measures to reduce the influence of the raised concentrate ratio on sintering production:researching base properties of iron powder,making out the reasonable composition control standard for sinter,optimizing mixed materials proportion and charging equipments parameters,the predicted target to raise iron concentrate proportion rate in sintering from 24.48 to 36.15 percent was realized,good production effect got.
引文
[1]白永强,程树森,赵宏博,等.钒钛烧结矿还原粉化过程的矿相分析[J].烧结球团.2011,36(2):1~6.
    [2]客海滨,张玉柱,王丽丽,等.不同Mg O含量对烧结矿质量的影响[J].河南冶金.2007,15(1):8~10.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700