摘要
Fe-based alloy layer reinforced by Ti(C,N) particles was produced on the surface of cast steel.X-ray diffraction (XRD) was used for phase identification in the composite coating.The microstructure of laser cladding layer was analyzed by means of optical microscope (OM),electron probe microscope analyzer (EPMA),scanning electron microscope (SEM) and transmission electron microscope (TEM).The results show that Ti(C0.3N0.7) particle is introduced by an in-situ metallurgical reaction of TiN particle and graphite powder in the process of laser cladding.The shape of lots of Ti(C0.3N0.7) particle is irregular.The sizes of Ti(C0.3N0.7) particles range from 0.1 to 6.0 μm,and they are dispersed evenly in the matrix,which is fine dendritic or cellular crystal.A new kind of phase named Ti(C0.3N0.7) particles are tightly bonded with α-Fe microstructure,and there is a clean and smooth phase interface between ceramic reinforcement phase and the matrix.
Fe-based alloy layer reinforced by Ti(C,N) particles was produced on the surface of cast steel.X-ray diffraction (XRD) was used for phase identification in the composite coating.The microstructure of laser cladding layer was analyzed by means of optical microscope (OM),electron probe microscope analyzer (EPMA),scanning electron microscope (SEM) and transmission electron microscope (TEM).The results show that Ti(C0.3N0.7) particle is introduced by an in-situ metallurgical reaction of TiN particle and graphite powder in the process of laser cladding.The shape of lots of Ti(C0.3N0.7) particle is irregular.The sizes of Ti(C0.3N0.7) particles range from 0.1 to 6.0 μm,and they are dispersed evenly in the matrix,which is fine dendritic or cellular crystal.A new kind of phase named Ti(C0.3N0.7) particles are tightly bonded with α-Fe microstructure,and there is a clean and smooth phase interface between ceramic reinforcement phase and the matrix.
引文
[1]Lackner Juergen M.Industrially-Styled Room-Temperature Pulsed Laser Deposition of Titanium-Based Coatings[J].Vacuum,2005,78:73.
[2]Yang Y L,Zhang D,Kou H S.Laser Cladded TiCN Coatingson the Surface of Titanium[J].Acta Metallurgical Sinica,2007,20:210.
[3]Lackner J M,Waldhauser W,Ebner R.Large-Area Pulsed La-ser Deposition of Smooth TiCN Coatings at Room Temperature Mechanical and Tribological Properties[J].Surface and Coat-ings Technology,2004,188:519.
[4]XUE Qi,JIN Yong,HU Dong-ping,et al.Study of TiC+TiN Multiple Films on Type of316LStainless Steel[J].Transac-tions of Materials and Heat Treatment,2004,25(5):916.
[5]Lei T C,Ouyang J H,Pei Y T,et al.Microstructure and Slid-ing Wear Properties of Laser Clad TiN Reinforced Composite Coating[J].Surface Engineering,1996,12(1):55.
[6]Mridha S.Titanium Nitride Layer Formation by TIG Surface Melting in a Reactive Environment[J].Journal of Materials Processing Technology,2000,168:471.
[7]Cheng F T,Lo K H,Man H C.NiTi Cladding on Stainless Steel by TIG Surfacing Process[J].Surfacing and Coating Technol-ogy,2003,172:308.
[8]Kobayashi A.Formation of TiN Coatings by Gas Tunnel Type Plasma Reactive Spraying[J].Surfacing and Coating Technol-ogy,2000,132:152.
[9]CHEN Shen-feng,LU Di-fen,LIU Fu-de,et al.Synthesizing Powder of Ti(C0.12N0.88)at High Temperature[J].China Ce-ramics,2000,36(5):4(in Chinese).