摘要
采用双平行柔性铰链结构设计了一种二维微动平台,并计算了微动平台各方向的刚度。根据约束条件,建立了理论刚度数学模型;采用序列二次规划(SQP)算法对平台结构进行多目标优化,并通过MATLAB软件对数学模型进行求解;利用ANSYS软件对优化后平台的位移、刚度和固有频率进行仿真分析。理论计算和仿真结果表明,微动平台具有良好的静、动态特性。
A two-dimensional micro-motion platform was designed with the double parallel flexible hinges and the stiffness of the micro-motion platform in each direction was calculated. According to the constraint conditions, a theoretical stiffness mathematical model was established; the sequential quadratic programming(SQP) algorithm was used for the multi-objective optimization of the platform structure, and the mathematical model was solved by MATLAB software; the displacement, stiffness and natural frequency of the optimized platform were simulated and analyzed by using ANSYS software. The theoretical calculations and simulation results show that the micro-motion platform has good static and dynamic characteristics.
引文
[1] 彭芸浩.压电陶瓷驱动微位移平台及控制系统研究[D].昆明:昆明理工大学,2017.
[2] MURAOKA M,SANADA S.Displacement amplifier for piezoelectric actuator based on honeycomb link mechanism[J].Sensors and Actuators A:Physical,2010,157(1):84-90.
[3] TANG Xueyan,CHEN I M,LI Qing.Desing and nonlinear modeling of a large-displacement XYZ flexure parallel mechanism with decoupled kinematic structure[J].Review of Scientific Instruments,2006,77(11):115101-115101-11.
[4] 朱军辉.全压电驱动的二维大行程纳米定位平台研究[D].苏州:苏州大学,2015.
[5] 徐骁,任佳琦,朱晓博,等.一种垂直运动精密微定位平台的设计与分析[J].机械设计与研究,2016,32(4):54-58.XU Xiao,REN Jiaqi,ZHU Xiaobo,et al.Design and analysis of a vertical motion precision micropositioning platform[J].Mechanical Design & Research,2016,32(4):54-58.
[6] 刘雪瑞.二维压电微动平台的研究[D].南京:南京航空航天大学,2017.
[7] 李书环.超精密切削微进给平台的设计与研究[D].天津:天津大学,2006.
[8] 吴鹰飞,周兆英.柔性铰链的设计计算[J].工程力学,2002,19(6):136-140.WU Yingfei,ZHOU Zhaoying.Flexible hinge design and calculation[J].Engineering Mechanics,2002,19(6):136-140.