摘要
A new frequency standard comparison system is proposed based on the group quantization phase processing. By shortening the width of phase coincidence fuzzy area and capturing the best group phase coincidences, we reduce the randomness of the counting gate and improve the measurement precision of the comparison system. The method is based on the Fieldprogrammable gate array(FPGA), which not only retains the advantage using phase synchronization detection technology to overcome the ±1-word counting error, but also accelerates the system response time, simplifies the measurement equipment, and reduces the development cost and power consumption. The experimental results show that the method is reasonable and scientific, and the comparison accuracy of the system can reach the E-12s~(-1) level, obviously superior to the measurement accuracy of the traditional frequency standard comparison method,which has a wide application and popularization value.
A new frequency standard comparison system is proposed based on the group quantization phase processing. By shortening the width of phase coincidence fuzzy area and capturing the best group phase coincidences, we reduce the randomness of the counting gate and improve the measurement precision of the comparison system. The method is based on the Fieldprogrammable gate array(FPGA), which not only retains the advantage using phase synchronization detection technology to overcome the ±1-word counting error, but also accelerates the system response time, simplifies the measurement equipment, and reduces the development cost and power consumption. The experimental results show that the method is reasonable and scientific, and the comparison accuracy of the system can reach the E-12s~(-1) level, obviously superior to the measurement accuracy of the traditional frequency standard comparison method,which has a wide application and popularization value.
引文
[1]S.Lyons and K.Wei,“Manuchehr Soleimani,wideband precision phase detection for magnetic induction spectroscopy”,Measurement,Vol.115,No.2,pp.45-51,2018.
[2]P.Salzenstein and T.Y.Wu,“Uncertainty analysis for a phase-detector based phase noise measurement system”,Measurement,Vol.85,No.5,pp.118-123,2016.
[3]F.N.Murrieta-Rico,O.Yu.Sergiyenko,V.Pentranovskii,et al.,“Pulse width influence in fast frequency measurements using rational approximations”,Measurement,Vol.86,No.5,pp.67-78,2016.
[4]B.Q Du,D.Y Zuo,X.Geng,et al.,“Precise frequency linking method based on phase group synchronization”,Measurement,Vol.62,No.2,pp.222-229,2015.
[5]B.Q.Du and S.H.Dong,“Quantized phase step technique based on different frequency signals and its characteristics”,Chinese Journal of Electionics,Vol.22,No.3,pp.621-626,2013.
[6]L.Angrisani,M.D.Apuzzo,D.Grillo,et al.,“A new timedomain method for frequency measurement of sinusoidal signals in critical noise conditions”,Measurement,Vol.49,No.3,pp.368-381,2014.
[7]S.Masaya,“Audio signal separation through complex tensor factorization:Utilizing modulation frequency and phase information”,Signal Processing,Vol.142,No.1,pp.137-148,2018.
[8]Y.Huang,J.L.Lin and M.Giess,“High accuracy time delay measurements for band-pass signals”,IEEE Transactions on Instrumentation and Measurement,Vol.62,No.11,pp.2998-3005,2013.
[9]T.K.Wang,F.R.Chang and S.Y.Lin,“Realize a frequency stability measurement system with PTP”,IEEETransactions on Instrumentation and Measurement,Vol.66,No.6,pp.1563-1567,2013.
[10]B.Q.Du and D.Liu,“High-resolution and wide range time synchronization detection method based on time interval measurement”,Acta Electronica Sinica,Vol.41,No.6,pp.1076-1083,2013.(in Chinese)
[11]R.N.Dean and A.K.Rane,“A digital frequency-locked loop system for capacitance measurement”,IEEE Transactions on Instrumentation and Measurement,Vol.62,No.4,pp.777-784,2013.
[12]B.Q.Du and W.Zhou,“Novel phase-locked system of hydrogen maser frequency standard based on different frequency phase Processing”,Acta Electronica Sinica,Vol.38,No.6,pp.1262-1267,2010.(in Chinese)
[13]B.Q.Du,S.F.Dong,Y.F.Wang,et al.,“High resolution frequency measurement method with a wide-frequency range based on quantized phase step law”,IEEE Transactions on Ultrasonics,Ferroelectrics and Frequency Control,Vol.60,No.11,pp.2237-2243,2013.
[14]D.Georgakopoulos and S.Quigg,“Precision measurement system for the calibration of phasor measurement Units”,IEEE Transactions on Instrumentation and Measurement,Vol.66,No.6,pp.1441-1445,2017.
[15]X.D.Zhao,D.M.Laverty,A.McKernan,et al.,“GPS-disciplined analog-to-digital converter for phasor measurement applications”,IEEE Transactions on Instrumentation and Measurement,Vol.66,No.9,pp.2349-2357,2017.