氢化钛-石墨制备Al-Ti-C母合金的机理与组织
|
摘要
采用扫描电子显微镜(SEM)、能谱仪(EDS)、X射线衍射(XRD)等研究了由氢化钛-石墨法制备的Al-Ti-C母合金的组织性能。结果表明:由氢化钛-石墨与铝液反应制备Al-Ti-C母合金的机理是由氢化钛、石墨分别作为钛源、碳源,氢化钛受热分解为钛和氢,钛与铝、石墨反应生成钛铝、钛碳或者铝碳化合物。由铝钛化合物、碳铝化合物、钛碳化合物组成具有细化作用的Al-Ti-C母合金。合金的物相组成包括:α(Al)、铝钛、碳铝、钛碳化合物等物相,金相组织为等轴晶或者树枝晶,平均晶粒尺寸20～40μm。合金基体中存在针片状、长条状的初晶相,晶界上存在含钛、碳、铁、硅的花瓣状初晶,钛、碳组元沿晶界、晶内分布大体均匀,在初晶相附近存在明显的钛、碳富集、偏聚现象。冰晶石有利于碳与铝润湿、反应,生成的第二相在晶内扩散更充分、分布也更均匀。
The microstructure and properties of Al-Ti-C master alloy prepared by titanium hydride and graphite were studied by X-ray diffraction(XRD), scanning electron microscope(SEM) and energy dispersive spectrometer(EDS). The results show that the mechanism of Al-Ti-C alloy prepared by the reaction of titanium hydride-graphite and aluminum liquid is that titanium hydride and graphite are respectively used as titanium and carbon sources, and titanium and hydrogen are obtained by thermal decomposition of titanium hydride.Titanium react with aluminum and graphite to form titanium-aluminum, titanium-carbon or carbon-aluminum compounds. Titanium aluminum, carbon aluminum and titanium carbon compounds form refined Al-Ti-C alloy. The phase composition of the alloy includesα(Al), Ti-Al, C-Al, Ti-C compounds and other phases. The microscopic structure is equiaxed or dendrite structure, and the average grain size is 20～40 μm. There are needle like or rod like primary crystals in the alloy matrix. There are petal like primary crystals containing titanium, carbon, iron and silicon on the grain boundaries. The titanium and carbon elements distribute evenly along the grain boundaries and the grains. There is obvious titanium and carbon enrichment and segregation near the primary phase. Cryolite is conducive to the wetting and reaction of carbon and aluminum, and the second phases generated diffuse more fully and uniformly in the grain.
The microstructure and properties of Al-Ti-C master alloy prepared by titanium hydride and graphite were studied by X-ray diffraction(XRD), scanning electron microscope(SEM) and energy dispersive spectrometer(EDS). The results show that the mechanism of Al-Ti-C alloy prepared by the reaction of titanium hydride-graphite and aluminum liquid is that titanium hydride and graphite are respectively used as titanium and carbon sources, and titanium and hydrogen are obtained by thermal decomposition of titanium hydride.Titanium react with aluminum and graphite to form titanium-aluminum, titanium-carbon or carbon-aluminum compounds. Titanium aluminum, carbon aluminum and titanium carbon compounds form refined Al-Ti-C alloy. The phase composition of the alloy includesα(Al), Ti-Al, C-Al, Ti-C compounds and other phases. The microscopic structure is equiaxed or dendrite structure, and the average grain size is 20～40 μm. There are needle like or rod like primary crystals in the alloy matrix. There are petal like primary crystals containing titanium, carbon, iron and silicon on the grain boundaries. The titanium and carbon elements distribute evenly along the grain boundaries and the grains. There is obvious titanium and carbon enrichment and segregation near the primary phase. Cryolite is conducive to the wetting and reaction of carbon and aluminum, and the second phases generated diffuse more fully and uniformly in the grain.
引文
[1]Wang Hongming(王宏明),Peng Congxiang(彭琮翔),Li Guirong(李桂荣)et al.Rare Metal Materials and Engineering(稀有金属材料与工程)[J],2017,46(5):1425
[2]Dursun T,Soutis C.Materials&Design[J],2014,56:862
[3]He Yongdong(贺永东),Xing Shiyu(邢诗雨),Chen Chu(陈楚)et al.Mining and Metallurgical Engineering(矿冶工程)[J],2016(6):108
[4]Hu Fang(胡芳),Zheng Ziqiao(郑子樵),Zhong Jifa(钟继发)et al.Rare Metal Materials and Engineering(稀有金属材料与工程)[J],2017,46(7):1989
[5]Wang Z J,Si N C.Rare Metal Materials and Engineering[J],2015,44(12):2970
[6]Sato H,Ota K,Furukawa M et al.Materials Transactions[J],2013,54(9):1554
[7]Sreekumar V M,Eskin D G.JOM[J],2016,68(12):3088
[8]Huang Yuanchun(黄元春),Du Zhiyong(杜志勇),Xiao Zhengbing(肖政兵)et al.Journal of Materials Engineering(材料工程)[J],2015,43(12):75
[9]Zhong Haiyan(钟海燕),Yuan Fusheng(袁孚胜).Nonferrous Metal Materials and Engineering(有色金属材料与工程)[J],2016,37(5):243
[10]Banerji A,Reif W.Metallurgical Transactions A[J],1986,17(12):2127
[11]Wang E,Liu X.China Foundry[J],2015,12(2):99
[12]Tang P,Li W F,Wang K et al.Materials&Design[J],2017,115:147
[13]Wang T,Gao T,Zhang P et al.Journal of Alloys and Compounds[J],2014,589:19
[14]Li He(李贺),Chai Lihua(柴丽华),Ma Tengfei(马腾飞)et al.Journal of Materials Engineering(材料工程)[J],2017,45(2):39
[15]Zhuang Hongyu(庄洪宇),Pan Xuemin(潘学民).Rare Metal Materials and Engineering(稀有金属材料与工程)[J],2010,39(1):46
[16]Jiao X Y,Wang X H,Kang X Q et al.Materials and Manufacturing Processes[J],2017,32(5):489
[17]Zhang Yuehong(张月红),Su Yanqing(苏彦庆),Guo Jingjie(郭景杰)et al.Rare Metal Materials and Engineering(稀有金属材料与工程)[J],2010,39(6):1107
[18]Wang Jiawei(王家伟).Guangzhou Chemical Industry(广州化工)[J],2011,39(10):19
[2]Dursun T,Soutis C.Materials&Design[J],2014,56:862
[3]He Yongdong(贺永东),Xing Shiyu(邢诗雨),Chen Chu(陈楚)et al.Mining and Metallurgical Engineering(矿冶工程)[J],2016(6):108
[4]Hu Fang(胡芳),Zheng Ziqiao(郑子樵),Zhong Jifa(钟继发)et al.Rare Metal Materials and Engineering(稀有金属材料与工程)[J],2017,46(7):1989
[5]Wang Z J,Si N C.Rare Metal Materials and Engineering[J],2015,44(12):2970
[6]Sato H,Ota K,Furukawa M et al.Materials Transactions[J],2013,54(9):1554
[7]Sreekumar V M,Eskin D G.JOM[J],2016,68(12):3088
[8]Huang Yuanchun(黄元春),Du Zhiyong(杜志勇),Xiao Zhengbing(肖政兵)et al.Journal of Materials Engineering(材料工程)[J],2015,43(12):75
[9]Zhong Haiyan(钟海燕),Yuan Fusheng(袁孚胜).Nonferrous Metal Materials and Engineering(有色金属材料与工程)[J],2016,37(5):243
[10]Banerji A,Reif W.Metallurgical Transactions A[J],1986,17(12):2127
[11]Wang E,Liu X.China Foundry[J],2015,12(2):99
[12]Tang P,Li W F,Wang K et al.Materials&Design[J],2017,115:147
[13]Wang T,Gao T,Zhang P et al.Journal of Alloys and Compounds[J],2014,589:19
[14]Li He(李贺),Chai Lihua(柴丽华),Ma Tengfei(马腾飞)et al.Journal of Materials Engineering(材料工程)[J],2017,45(2):39
[15]Zhuang Hongyu(庄洪宇),Pan Xuemin(潘学民).Rare Metal Materials and Engineering(稀有金属材料与工程)[J],2010,39(1):46
[16]Jiao X Y,Wang X H,Kang X Q et al.Materials and Manufacturing Processes[J],2017,32(5):489
[17]Zhang Yuehong(张月红),Su Yanqing(苏彦庆),Guo Jingjie(郭景杰)et al.Rare Metal Materials and Engineering(稀有金属材料与工程)[J],2010,39(6):1107
[18]Wang Jiawei(王家伟).Guangzhou Chemical Industry(广州化工)[J],2011,39(10):19