16位控制器EMC优化
详细信息 查看官网全文
- 论文作者：郑凯锋
- 年：2016
- 作者机构：豫北转向系统股份有限公司;
- 论文关键词：PCB设计 ; 对外电磁干扰 ; EMC
- 英文论文关键词：PCB design ; External emi ; EMC
- 会议召开时间：2016-10-18
- 会议录名称：第十三届河南省汽车工程科技学术研讨会论文集
- 英文会议录名称：The Thirteenth Scientific Research and Academic Congress Proceedings of SAE-Henan
- 语种：中文
- 分类号：U463.6
- 学会代码：HQGX
- 会议名称：第十三届河南省汽车工程科技学术研讨会
- 会议地点：中国河南信阳
- 主办单位：河南省汽车工程学会
- 学会名称：河南省汽车工程学会
- 页数：3
- 文件大小：1639k
- 原文格式：O
- 会议级别：地方
摘要
随着汽车电气化、智能化发展,汽车上所搭载的电子部件越来越多,由此带来的电磁兼容问题也日益严重。所以,电磁兼容问题也就成为汽车电子部件能否正常工作的关键。同样,随着电子技术的飞速发展,印刷电路板(PCB)的密度越来越高,PCB设计的好坏对电路的干扰及抗干扰能力影响很大。因此,对PCB进行电磁兼容性(EMC)设计是非常重要的,保证PCB的电磁兼容性是整个系统设计的关键。本文针对现有16位EPS控制器对外的电磁干扰进行分析,提出了相应的整改措施,保证控制器对外电磁干扰能够达到相应标准的高等级要求。
with the development of electrification,intelligence,carry on car more and more electronic components,resulting in the electromagnetic compatibility problem is increasingly serious.So the electromagnetic compatibility problem also becomes the key to automotive electronic components can work normally.Similarly,with the rapid development of electronic technology,the density of printed circuit board(PCB)is more and more high,the stand or fall of PCB design had a great influence on interference and anti-interference ability of the circuit.Therefore,for electromagnetic compatibility(EMC) design of PCB is very important,ensure electromagnetic compatibility of PCB is the key to the whole system design.This article in view of the existing 16-bit EPS controller external electromagnetic interference is analyzed,put forward the corresponding improvement measures,the external electromagnetic interference of the controllers can meet the high requirements of corresponding standards.
with the development of electrification,intelligence,carry on car more and more electronic components,resulting in the electromagnetic compatibility problem is increasingly serious.So the electromagnetic compatibility problem also becomes the key to automotive electronic components can work normally.Similarly,with the rapid development of electronic technology,the density of printed circuit board(PCB)is more and more high,the stand or fall of PCB design had a great influence on interference and anti-interference ability of the circuit.Therefore,for electromagnetic compatibility(EMC) design of PCB is very important,ensure electromagnetic compatibility of PCB is the key to the whole system design.This article in view of the existing 16-bit EPS controller external electromagnetic interference is analyzed,put forward the corresponding improvement measures,the external electromagnetic interference of the controllers can meet the high requirements of corresponding standards.
引文
[1]林晓铮,EMC与产品设计[J].印制电路信息,2006,5:25-29
[2]刘建斌,电磁兼容与电路板的可靠性设计[J].电子工艺技术,2006,5,28 1-283
[3]朱洪涛,印制电路板的电磁兼容性设计[J].电子质量,2007,01:81-86
4]樊光荣,印制线路板的可靠性设计[J].电子质量,2008,02:36-38
[4]GB 18655-2010车辆、船和内燃机无线电骚扰特性用于保护车载接收机的限值和测量方法;
[2]刘建斌,电磁兼容与电路板的可靠性设计[J].电子工艺技术,2006,5,28 1-283
[3]朱洪涛,印制电路板的电磁兼容性设计[J].电子质量,2007,01:81-86
4]樊光荣,印制线路板的可靠性设计[J].电子质量,2008,02:36-38
[4]GB 18655-2010车辆、船和内燃机无线电骚扰特性用于保护车载接收机的限值和测量方法;