摘要
目前大部分汽车企业对于RPS的应用处于设计开发阶段,缺乏系统的车身制造过程中定位系统的有效控制措施。本文以RPS点选取原则为出发点,结合焊装模夹检过程开发,通过车型开发过程中实际案例进行分析,对RPS的选取原则及实际应用进行系统的描述。
The application of RPS mostly rely on the design development phase in most car companies,so the body manufacturing process positioning system is lack of systematic and effective controls.In this paper,the principle of selecting RPS point as the starting point,combined with the development process of Mould,Fixture and Gage,analyzed by actual case in vehicle development process,the selection principle and practical application of RPS are put forward.
引文
[1]尹亚雷,张东强.RPS系统在白车身定位中的应用[J].汽车工艺与材料.2015(7):18-20.
[2]卢宇宏,李春霞.RPS系统在汽车白车身焊装定位中的应用[J].机械工程师.2014(8):183-184.
[3]赵吉琛,陈昌明.轿车车身冲压件RPS点分布合理性的分析[J].北京汽车.2011(6):37-39.
[4]吴绍富.基于。RPS的车身总拼焊装夹具设计[J].现代制造技术与装备.2015(3):16-18.