220GHz检波器的设计
详细信息    查看官网全文
摘要
本文基于In P肖特基势垒二极管以及混合集成电路工艺,介绍了一种中心频率为220GHz,带宽为20GHz的检波器的设计方法。该检波器输入端口为WR4.3标准矩形波导,输出为SMA转接头。输入射频信号通过波导到微带的过渡馈入。负向直流输出电压则通过低通滤波器滤出。当输入功率为-24d Bm时,在中心频率处的电压灵敏度大于1200m V/m W。
In this paper, a design method of hybrid integrated detector from 210 to 230 GHz is introduced with In P Schottky barrier diode and hybrid integrated circuit process. The input port of the detector is WR4.3 standard rectangular waveguide and the output is an SMA connector. The signal was coupled into the circuit through a waveguide to micro-strip transition. The detector's negative polarity dc output was picked off the input micro-strip through a low pass filter. The voltage responsivity is above 1200 m V/m W at the center frequency with-24 d Bm input power.
引文
[1]H.Meinel and L.P.Schmidt.High sensitivity millimeter-wave detectors using fin-line technology.5thInt.Conf.Infrared and Millimeter-waves Dig.(Freiburg,Germany),1980,2(4),:133-135
    [2]胡皓全,宋伟.Ka波段微带检波器设计.电子科技大学学报,2006(3):324-327
    [3]顾墨琳.微波固态电路设计(中译本).中电科技集团第十四研究所,2003,pp.479-499
    [4]李松.毫米波检波器:[硕士学位论文].成都:电子科技大学,2006年
    [5]宋伟.毫米波检波器的研究与设计:[硕士学位论文].成都:电子科技大学,2007年
    [6]董俊,李家胤等.W波段检波器的研究与设计.微波学报,2010(1):254-256

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700