一种镍基高温合金保护气氛电渣重熔大锭冶金质量的研究
详细信息 查看官网全文
- 英文论文题名：Study of a Nickel-base Superalloy Great Atmosphere ESR Ingot Metallurgy Qualit
- 论文作者：李连鹏 ; 邢宝富 ; 关旭东 ; 杨松 ; 潘彦丰 ; 吴贵林
- 英文论文作者：Li Lianpeng ; Xing Baofu ; Guan Xudong ; Yang Song ; Pan Yanfeng ; Wu Guilin ; R&D Center of Fushun Special Steel Co. ; Ltd. ; No.3 Steelmaking Plant Technology Section of Fushun Special Steel Co. ; Ltd.
- 年：2015
- 作者机构：抚顺特殊钢股份有限公司技术中心;抚顺特殊钢股份有限公司第三炼钢厂技术科;
- 论文关键词：保护气氛电渣 ; GH4033合金 ; 冶金质量 ; 点偏
- 英文论文关键词：protective atmosphere electroslag ; GH4033 alloy ; metallurgical quality ; point bia
- 会议召开时间：2015-05-20
- 会议录名称：第十三届中国高温合金年会论文集
- 英文会议录名称：Proceedings of the 13th China Superalloys Conference
- 语种：中文
- 分类号：TG132.3;TF14
- 学会代码：ZGJS
- 会议名称：第十三届中国高温合金年会
- 会议地点：中国北京
- 主办单位：中国金属学会高温材料分会
- 学会名称：中国金属学会
- 页数：3
- 文件大小：767k
- 原文格式：O
- 会议级别：全国
摘要
本文研究了保护气氛电渣炉重熔GH4033合金锭的冶金质量,并与普通电渣炉重熔GH4033合金锭的冶金质量进行对比。结果表明:采用氩气保护后,钢锭各部位成分均匀,钢锭头尾及横截面Al、Ti浓度差小,Al、Ti等易氧化元素烧损少,气体含量降低,并且解决了大锭型低倍点偏问题。
In this paper,protective atmosphere electroslag remelting furnace GH4033 alloy ingot metallurgy great quality,and with ESR GH4033 alloy ingot metallurgy large existing atmosphere quality comparison results showed that;a fully enclosed Ar gas protection,low and stable melting speed,set a reasonable fluctuation of water flow and slag resistance,strong ability to slag off the S system,large alloy remelting GH4033 alloy ingots each part element distribution,and the cross section of the ingot head and tail Al,Ti,it is important to solve the atmospheric ESR GH4033 alloy ingots can not solve the big low magnification point bias problem.
In this paper,protective atmosphere electroslag remelting furnace GH4033 alloy ingot metallurgy great quality,and with ESR GH4033 alloy ingot metallurgy large existing atmosphere quality comparison results showed that;a fully enclosed Ar gas protection,low and stable melting speed,set a reasonable fluctuation of water flow and slag resistance,strong ability to slag off the S system,large alloy remelting GH4033 alloy ingots each part element distribution,and the cross section of the ingot head and tail Al,Ti,it is important to solve the atmospheric ESR GH4033 alloy ingots can not solve the big low magnification point bias problem.
引文
[1]郭建亭.高温合金材料学,制备工艺[M].北京:科学出版社,2008.
[2]李正邦.电渣熔铸理论与实践[M].高新技术应用出版社,1996.
[3]刘庆文.保护气体下的电渣重熔[J].特钢技术,2005,10(3,44).
[2]李正邦.电渣熔铸理论与实践[M].高新技术应用出版社,1996.
[3]刘庆文.保护气体下的电渣重熔[J].特钢技术,2005,10(3,44).