基于ANSYS Workbench的蜗轮蜗杆接触仿真分析
详细信息 查看官网全文
- 论文作者：朱东博 ; 张艳芝 ; 景伟伟
- 年：2016
- 作者机构：豫北转向系统股份有限公司;
- 论文关键词：UG ; ANSYS ; 蜗轮蜗杆 ; 接触分析
- 英文论文关键词：UG ; ANSYS ; Worm and gear ; Contact analysis
- 会议召开时间：2016-10-18
- 会议录名称：第十三届河南省汽车工程科技学术研讨会论文集
- 英文会议录名称：The Thirteenth Scientific Research and Academic Congress Proceedings of SAE-Henan
- 语种：中文
- 分类号：U463.4
- 学会代码：HQGX
- 会议名称：第十三届河南省汽车工程科技学术研讨会
- 会议地点：中国河南信阳
- 主办单位：河南省汽车工程学会
- 学会名称：河南省汽车工程学会
- 页数：3
- 文件大小：1430k
- 原文格式：O
- 会议级别：地方
摘要
介绍了电动助力系统中减速机构的重要性,并利用UG三维软件建立了蜗轮蜗杆啮合的实体模型,通过有限元分析软件ANSYS workbench进行蜗轮蜗杆接触仿真分析,对比理论计算得出的结果,为蜗轮蜗杆的优化设计提供了有效依据。
The importance of retarding mechanism in electric power system was introduced,and the worm gear and worm gearing was established based on UG solid model.The finite element analysis software ANSYS Workbench was used to simulate that worm and worm wheel contact simulation analysis,the theoretical calculation results were obtained for provides effective basis for optimization design.
The importance of retarding mechanism in electric power system was introduced,and the worm gear and worm gearing was established based on UG solid model.The finite element analysis software ANSYS Workbench was used to simulate that worm and worm wheel contact simulation analysis,the theoretical calculation results were obtained for provides effective basis for optimization design.
引文
[1]杨玲玲,胡树根,林小哲.渐开线蜗杆在UG中的精确建模[J].轻工机械,2007.
[2]濮良贵,纪名刚.机械设计[M].北京:高等教育出版社.2001.
[2]濮良贵,纪名刚.机械设计[M].北京:高等教育出版社.2001.