摘要
Model of a 300MW thermal power unit's governing system of steam turbine was established to analyze its load fluctuation during main steam valve activity test. The model contains three sub-models. They are model of turbine's governor during main steam valve activity test, model of governing valve, model of steam turbine considering governing valve's discharge characteristic. Based on the established model, the cause of load fluctuation and optimization method were determined. Then the optimization method was applied to actual main steam valve activity test. The test result indicated that load fluctuation was obviously suppressed after optimization.
Model of a 300MW thermal power unit's governing system of steam turbine was established to analyze its load fluctuation during main steam valve activity test. The model contains three sub-models. They are model of turbine's governor during main steam valve activity test, model of governing valve, model of steam turbine considering governing valve's discharge characteristic. Based on the established model, the cause of load fluctuation and optimization method were determined. Then the optimization method was applied to actual main steam valve activity test. The test result indicated that load fluctuation was obviously suppressed after optimization.
引文
[1]W.Xia.Comprehensive Optimization Measures for Unilateral Joint Valve Activity Test of High Pressure Total Valve-Governing Valve of 600MW Supercritical Steam Turbine,2014,27(5):23-27.
[2]W.Sun.Testing Method of Auto-valve of 600MW steam Turbine,North China Electric Power,2010,Phase11:13-15.
[3]DL/T 774-2004 Overhaul and Operation and Maintenance code of I and C system in thermal power plant[S].
[4]DL/T 656-2006 Code for acceptance test of turbine control system in fossil fuel power plant[S].
[5]K,Sheng,F.Liu,W.Liu,et al.Influence of steam turbine valve discharge characteristics on power systems and its control strategy[J].Automation of electric power systems,2012,36(7):104-108.
[6]K.Sheng.Power control system for thermal power generator units based on the inner model control[J].Journal of engineering for thermal energy&power,2013,28(6):616-621.
[7]K.Sheng,L.Wei,X.Jiang,et al.Modeling simulation and verification of turbine governing system based on PSASPand Simulink[J].Electric Power,2015,48(2):1-6.
[8]K.Sheng,X.Zhu,H.Ni,et al.Simulation and model validation of steam turbine and its governing system[J].Electric Power,2013,46(12):52-58.
[9]K.Sheng.Influence of high pressure cylinder steam volume link model parameters on the speed governing system simulation and calibration for reheat condensing turbine[J].East China Electric Power,2012,40(11):2049-2053.
[10]X.Zhu,K.Sheng,L.Liu.Intelligent parameter identification of steam turbine and its governing systems based on multi-algorithm[J].Power system protection and control,2013,41(20):138-143.
[11]Y.Tian,J.Guo,Y.Liu,et al.A mathematical model of reheat turbine for power grid stability calculation[J].Power system technology,2007,31(5):39-44.
[12]J.Li,F.Liu.Optimization for the flow characteristic function of turbine valves and the influences on safe and economic operation[J].Electric power,2008,41(12):50-53.
[13]DL/T 1235-2013 Guide for modeling and testing of generator prime mover and governing system[S].