基于虚拟设计的车用四气门汽油机工作过程研究
摘要
引文
[1] 中华人民共和国国家发展和改革委员会,委员会令第 8 号,汽车产业发展政策,2004
[2] 宫村纪行,知野正志,多气门发动机的开发,小型内燃机,1991,(5): 51~58
[3] Endres H,Neuber H J,Wurms R,新措施优化滚流改善燃烧,国外内燃机,1995(5):12~18
[4] 周龙保,内燃机学,北京:机械工业出版社,1999,173~182
[5] Jeffrey A L,EGR's Effect on Oil Degradation and Intake System Performance,SAE paper 980179,1998
[6] Streib H M,Bichof H,Electronic Throttle Control(ETC):A Cost Effective System for Improved Emissions,Fuel Economy and Drivability,SAE paper 960338,1996
[7] 蒋德明,内燃机的涡轮增压,北京:机械工业出版社,1986
[8] Iwamoto K,Nakayama O,Development of Gasoline Direct Injection Engine,SAE paper 970541,1997
[9] Saito F,Misumi M,Komatsu M et a1,Mazda Advanced Lean Burn Engine with New Three Way Catalyst,SAE paper 945006,1994
[10] 王燕军,王建昕,帅石金等,汽油机稀薄燃烧研究的新进展—从 GDI 到HCCI,汽车技术,2002,(8):1~4
[11] Moriya Y,Watanabe A,Uda H et al,A Newly Development Intelligent Variable Valve Timing System—Continuously Controlled Cam Phasing as Applied to a New 3 Liter Inline 6 Engine,SAE paper 960579,1996
[12] Allen J , Production Electro-Hydraulic Variable Valve-Train for a New Generation of I.C. Engines,SAE Paper 2002-01-1109,2002
[13] Takemura S,A Study of a Continuous Variable Valve Event and Lift(VEL) System,SAE Paper 2001-01-0243,2001
[14] 李勤,现代内燃机排气污染物的测量与控制,北京:机械工业出版社,1998
[15] Rudolf H S,Homogeneous Charge Compression Ignition(HCCI):Benefits,Compromises and Future Engine Applications,SAE paper 1999-01-3682,1999
[16] Abthoff J O,The Mercedes Benz C-Class Series Hybrid,SAE paper 981123,1998
[17] 何保红,沈颖刚,吕晓旭等,光学测量技术在内燃机流场中的应用,内燃机,2002,(5):41~43
[18] 詹樟松,激光技术在内燃机缸内流动实验研究中的应用,小型内燃机,2000, 29(3):29~33
[19] 李君,郝利君,孙志军等,内燃机缸内全流场 PIV 测速系统,燃烧科学与技术,1997,3(4):400~405
[20] 杨延相,王天友,赵慧等,内燃机缸内流场的全场测试实验研究,内燃机学报,1998,16(1):42~49
[21] 薛敏霞,盛凯夫,激光诱导荧光法研究内燃机燃烧的最新进展,激光与红外,2002,32(3):136~138
[22] J Reboux,Daniel Puechberty,Study of Mixture In Homogeneities and Combustion Development in a S.I. Engine Using a New Approach of Laser Induced Fluorescence,SAE paper 961205,1996
[23] 息树和,张惠明,赵奎翰等,双成像高速摄影技术及其在柴油机燃烧研究中的应用,内燃机学报,1997,15(1):34~39
[24] Ricardo Consulting Engineers,Analysis of Steady Flow Tests on Inlet and Exhaust Ports,Dp. 93/0704
[25] Mayer K P,Swirl Measurement on the Stationary Flow Test Bench by Means of a Momentum Meter,AVL Report,Memo 618,1982
[26] Toshio Yamada,In-Cylinder Gas Motion of Multi-valve Engine—Three Dimensional Numerical Simulation,SAE paper 860465,1986
[27] Daniel C,Haworth,Multidimensional Port-and-Cylinder Flow Calculation for Two-and-Four-Per-Cylinder Engines:Influence of Intake Configuration on Flow Structure,SAE paper 900257,1990
[28] Iwamoto,The 1.5-Liter Vertical Vortex Engine,SAE paper 920670,1992
[29] Kuwaharak,Watanabet,Optimization of In-Cylinder Flow an Mixing for a Center-Spark Four-Valve Engine Employing the Concept of Barrel-Stratification,SAE paper 940986,1994
[30] Bae Choong-Sik,Kang Kern-Yong,The Correlation Between Flow and Combustion in a Four-Valve SI Engine, The First Asia-Pacific Conference on Combustion,Osaka,Japan,May 1997,12~15
[31] 李康,内燃机缸内空气运动的多维数值模拟,[博士学位论文],天津大学,1991
[32] 许思传,张建华,孙济美等,微机版内燃机缸内多维气流运动模拟程序 SUN-Ⅰ的开发,内燃机学报,1997,15(3):333~340
[33] 李玉锋,刘书亮,史绍熙等,提高四气门汽油机缸内滚流强度的研究,内燃机学报,1999,17(3):263~266
[34] 刘书亮,孙晓燕,史绍熙等,四气门汽油机中滚流运动的三维数值模拟,工程热物理学报,1999,20(1):116~120
[35] 夏兴兰,杨雄,朱忠伟等,数值模拟方法在柴油机进气道改进中的应用,内燃机学报,2002,20(5):424~428
[36] H.Jasak,Rapid CFD Simulation of Internal Combustion Engines,SAE Paper 1999-01-1185,1999
[37] 熊光楞,李伯虎,柴旭东,虚拟样机技术,系统仿真学报,2001,13(1):114~117
[38] Patankar S V, Numerical Heat Transfer and Fluid Flow,McGraw-Hill,1980
[39] 解茂昭,内燃机计算燃烧学,大连:大连理工大学出版社,2005
[40] Patrnkar S V,Spalding D B,A Calculation for Heat,Mass and Momentum Transfer in Three-Dimensional Parabolic Flow,Int. J. Heat Mass Transfer,1972,(15):1787~1806
[41] Issa R I,Gosman A D,Watkins A P,The Computation of Compressible and Incompressible Recirculating Flows by a Non-iterative Implicit Scheme,J. Comp. Phys.,1986,(62):66~82
[42] Issa R I ,Ahmadi Befrui B,Beshay K,Solution of The Implicitly Discretised Reacting Flow Equations by Operator-Splitting,J. Comp. Phys.,1991(93):388~410
[43] J C Kent,Observations on the Effects of Intake Generated Swirl and Tumble on Combustion Duration,SAE paper 892096,1989
[44] 刘书亮,宋飞舟,汽油机滚动涡流模拟试验台和滚流进气道的试验研究,内燃机工程,1995,16(4):1~9
[45] 裴普成,刘书亮,范永健,多气门汽油机滚流进气道结构的研究,内燃机学报,1998,(3):328~334
[46] Heywood J B,Internal Combustion Engine Fundamentals,Megrao-Hill Book Company,1988
[47] 傅晓光,毛羽,宋如刚等,CA1102 汽油机挤气射流燃烧室研究,燃烧科学与技术,2000,(2):161~165
[48] 李继军,赵慧,武德钰等,汽油机挤气射流—紊流型燃烧室压缩比优化的试验研究,内燃机学报,1999,17(4):419~420
[49] Connor J F,Mckinley N R,CFD Simulation of Intake Port Flow Using Automatic Mesh Generation:Compare with Laser Sheet, Swirl and LDA Measurements for Steady Flow Conditions,SAE Paper 980129,1998
[50] Omori S,Wachldo K I,Motomochi M,Effect of Intake Port Flow Pattern on the In-Cylinder Tumbling Air Flow in Multi-Valve SI Engines,SAE Paper 910477,1991
[51] Stone C R,Ladommatos N,The Measurement and Analysis of Swirl in Steady Flow,SAE Paper 921642,1992
[52] Andrew Mclandress,Roy Emerson,Philip Mcdowell,Intake and In-cylinder Flow Modeling Characterization of Mixing and Comparison with Flow Bench Results,SAE Paper 960635,1996
[53] 傅德薰,马延文,计算流体力学,北京:高等教育出版社,2002
[54] Yakhot V,Orszag S A,Renormalization Group Analysis of Turbulence. I. Basic Theory,Sci. Comput,1986(1):1~51
[55] Yakhot V,Development of Turbulence Models for Shear Flows by a Double Expansion Technique,Phys. Fluid,A 4:1515~1520,1992
[56] 马贵阳,谢茂昭等,内燃机缸内几种湍流流动涡粘度模型的比较,内燃机学报,2002,(5):433~437
[57] Fitzgeorge D,Allison J L,Air Swirl in a Road-Vehicle Diesel Engine,Proc Instn Mech Engrs (AD),1962/1963(4):151~168
[58] Ricardo Consulting Engineers,Analysis of Steady Flow Tests on Inlet and Exhaust Ports,Dp. 80/1123
[59] 蒋德明,内燃机原理,北京:机械工业出版社,1988
[60] Zhao Zhenwu,Liu Shuliang,Liu,Liu Dexin,Study on the Test Technology of Steady State Flow of Port with Variable Pressure Drop,Transactions of CSICE,2004,22(1):76~85
[61] 黄宜谅,内燃机性能与测试的研究,太原:山西科学技术出版社,2000,11~20
[62] 解茂昭,内燃机气缸内湍流运动的数值模拟,应用力学学报,1990,7(3):58~64
[63] 康秀玲,付光琦,祖炳锋等,4 气门柴油机进气特性的数值模拟和试验研究,内燃机学报,2003,21(3):261~264
[64] Shigeki Sugiura,Numerical Analysis of Flow in the Induction System of Internal Combustion Engine,SAE paper 900255,l990
[65] Pierre Godrie,Mark Zellat,Simulation of Flow Field Generated by Intake Port-Valve-Cylinder Configuration — Comparision With Measurements and Applications,SAE paper 940521,1994
[66] 祖炳锋,康秀玲,付光琦等,多气门发动机进、排气道的结构设计与评价,农业机械学报,2005,36(5):28~31
[67] Hadded,I Denbratt,Turbulence Characteristics of Air Motion in Four-valve SI Engines and Their Correlation With Combustion Parameters,SAE paper 910478,1991
[68] Kudou H,A Study about In-Cylinder Flow and Combustion in a 4-Valve S.I. Engine,SAE paper 920574,1992
[69] KUO T W,Multi-dimensional Port-and-Cylinder Gas Flow,Fuel Spray and Combustion Calculations for a Port-Fuel-Injection Engine , SAE Paper 920515,1992
[70] Ken Naitoh,Numerical Simulation of the Detailed Flow in Engine Ports and Cy1inders,SAE paper 900256,1990
[71] J R Arias,E Moreno,E Navarro,Using 1-D and 3-D Models for the Simulation of Gas Exchange Processes,SAE paper 2000-01-0658,2000
[72] 祖炳锋,康秀玲,付光琦等,车用四气门汽油机气道及缸内流场的瞬态模拟,天津大学学报,2005,38(11):975~980
[73] Rutland C J,Pieper C M,Hessel R,Intake and Cylinder Flow Modeling with a Dual-Valve Port,SAE paper 930069,1993
[74] 罗马吉,黄震,蒋炎坤等,内燃机进气过程多维数值模拟的研究,车用发动机,2003,(5):11~15
[75] Liu Shuliang,Li Yufeng,Lu Ming,Prediction of Tumble Speed in the Cylinder of the 4-valve,Spark-ignition Engines,SAE paper 2000-01-0247,2000
[76] 冯明志,李玉峰,孙晓燕等,四气门发动机缸内空气运动的试验和多维数值模拟计算,内燃机学报,1999,17(4):330~334
[77] 李玉峰,刘书亮,史绍熙等,四气门汽油机缸内滚流运动对燃烧过程影响的研究,工程热物理学报,1998,19(1):121~124
[78] J. Bohbot,F. A. Lafossas,A. Albrecht,A New Coupling Approach Using a 1D System Simulation Software and a 3D Combustion Code Applied to Transient Engine Operation,SAE paper 2004-01-3002,2004
[79] 刘永长,内燃机热力过程模拟,北京:机械工业出版社,2000
[80] 范维澄,万跃鹏,流动及燃烧的模型与计算,安徽:中国科学技术大学出版社,1992
[81] 陶文铨,计算传热学德近代进展,北京:科学出版社,2000
[82] G Fontana,E Galloni,R Palmaccio,Modeling of a Four-valve S.I. Engine Combustion:A Comparison of Two 3-D Computer Codes,SAE paper 2001-01-3235,2001
[83] Spalding D B,Mixing and Chemical Reaction on Steady Confined Turbulent Flames,12th Symposium (Internationa1) on Combustion,1971
[84] B Magnassen B F,Hjertager B H,On Mathematical Modeling of Turbulent Combustion with Special Emphasis on Soot Formation and Combustion,16th Symposium (Internationa1) on Combustion,1977
[85] T Kuo,R Reitz,Three-Dimendonal Computations of Combustion in Premixed Charge and Direct-Injected Two-Stroke Engines,SAE paper 920425,1992
[86] R Borghi,B Argueyrolles,Application of a “Presumed p.d.f. ” Model of Turbulent Combustion to Reciprocating Engines , 21st Symposium (International) on Combustion,1986
[87] W Cheng,J Diringer,Numerical Modelling of SI Engine Combustion with a Flame Sheet Mode1,SAE paper 910268,199l
[88] Ranasinghe J,Cant S,A Turbulent Combustion Model for a Stratified Charged,Spark Ignited Internal Combustion Engine,SAE paper 2000-01-0275,2000
[89] Tan Z,Kong S C,Reitz R D,Modeling Premixed and Direct Injection SI Engine Combustion Using the G-equation Model,SAE paper 2003-01-1843,2003
[90] Matthews R D,Chin Y W,Use Fractals to Model Turbulent Combustion in Spark Ignition Engines,SAE paper 910079,1991
[91] M.Jennings,Multi-Dimensional Modeling of Turbulent Premixeod Charge Combustion,SAE paper 920589,1992
[92] Weller H G,Uslu S,Gosman A D,Prediction of Combustion in Homogeneous Charge Spark-Ignition Engines,3rd Int. Symp. on Diagnostics and Modelling of Combustion in Internal Combustion Engines,Yokohama Japan,1994
[93] Marco Valério,Kuhlmann Raggi,José Ricardo Sodré,Improvement of a Model for Calculation of Oxides of Nitrogen Emissions from Spark Ignition Engines,SAE paper 2004-01-3001,2004
[94] 蒋德明,内燃机燃烧与排放学,西安:西安交通大学出版社,2001
[95] Baulch D L,Drysdall D D,Horne D G.,Evaluated Kinetic Data for High Temperature Reactions,Butterworth,1973
[96] Computational Dynamics adapco Group , STAR-CD Version 3.24 :Methodology,2004
[97] 蒋德明,火花点火式发动机的燃烧,西安:西安交通大学出版社,1992
[98] Senecai P K,Xin J,Reitz R D,Prediction of Residual Gas Fraction in IC Engines,SAE paper 962052,1996
[99] 宋金瓯,姚春德,姚广涛等,汽油机废气滚流分层技术对燃烧排放特性影响的研究,内燃机学报,2005,23(3):218~223
[100] Werner Hentachel,Peter Manz,Quantitative In-Cylinder NO LIF Measurements with a Exciter Laser Applied to a Mass-Production SI Engine Fueled with Isooctane and Regular Gasoline,SAE paper 970824,1997
[101] F Hildenbrand,C Schulz,Laser Spectroscopic investigation of Flow Fields and NO Formation in a Realistic SI Engine,SAE paper 980148,1998
[102] Ken Naitoh,Cycle Variation Analysis of Initial Flame Propagation Process in a Model Engine,SAE paper 2004-01-3007,2004
[103] 中华人民共和国国家环境保护总局,GB18352.3,轻型汽车污染物排放限值及测量方法(中国Ⅲ、Ⅳ阶段),北京:中国环境科学出版社,2005-04-15
[104] Walzer P,未来轿车用发动机,国外内燃机,2003(5):3-6
[105] Jun Harada,Tsutomu Tomita,Hroyuki Mizuno,Development of Direct Injection Gasoline Engine,SAE paper 970540,1997
[106] 杨世友,顾宏中,柴油机涡轮增压系统研究现状与进展,柴油机,2001,(4):1~5
[2] 宫村纪行,知野正志,多气门发动机的开发,小型内燃机,1991,(5): 51~58
[3] Endres H,Neuber H J,Wurms R,新措施优化滚流改善燃烧,国外内燃机,1995(5):12~18
[4] 周龙保,内燃机学,北京:机械工业出版社,1999,173~182
[5] Jeffrey A L,EGR's Effect on Oil Degradation and Intake System Performance,SAE paper 980179,1998
[6] Streib H M,Bichof H,Electronic Throttle Control(ETC):A Cost Effective System for Improved Emissions,Fuel Economy and Drivability,SAE paper 960338,1996
[7] 蒋德明,内燃机的涡轮增压,北京:机械工业出版社,1986
[8] Iwamoto K,Nakayama O,Development of Gasoline Direct Injection Engine,SAE paper 970541,1997
[9] Saito F,Misumi M,Komatsu M et a1,Mazda Advanced Lean Burn Engine with New Three Way Catalyst,SAE paper 945006,1994
[10] 王燕军,王建昕,帅石金等,汽油机稀薄燃烧研究的新进展—从 GDI 到HCCI,汽车技术,2002,(8):1~4
[11] Moriya Y,Watanabe A,Uda H et al,A Newly Development Intelligent Variable Valve Timing System—Continuously Controlled Cam Phasing as Applied to a New 3 Liter Inline 6 Engine,SAE paper 960579,1996
[12] Allen J , Production Electro-Hydraulic Variable Valve-Train for a New Generation of I.C. Engines,SAE Paper 2002-01-1109,2002
[13] Takemura S,A Study of a Continuous Variable Valve Event and Lift(VEL) System,SAE Paper 2001-01-0243,2001
[14] 李勤,现代内燃机排气污染物的测量与控制,北京:机械工业出版社,1998
[15] Rudolf H S,Homogeneous Charge Compression Ignition(HCCI):Benefits,Compromises and Future Engine Applications,SAE paper 1999-01-3682,1999
[16] Abthoff J O,The Mercedes Benz C-Class Series Hybrid,SAE paper 981123,1998
[17] 何保红,沈颖刚,吕晓旭等,光学测量技术在内燃机流场中的应用,内燃机,2002,(5):41~43
[18] 詹樟松,激光技术在内燃机缸内流动实验研究中的应用,小型内燃机,2000, 29(3):29~33
[19] 李君,郝利君,孙志军等,内燃机缸内全流场 PIV 测速系统,燃烧科学与技术,1997,3(4):400~405
[20] 杨延相,王天友,赵慧等,内燃机缸内流场的全场测试实验研究,内燃机学报,1998,16(1):42~49
[21] 薛敏霞,盛凯夫,激光诱导荧光法研究内燃机燃烧的最新进展,激光与红外,2002,32(3):136~138
[22] J Reboux,Daniel Puechberty,Study of Mixture In Homogeneities and Combustion Development in a S.I. Engine Using a New Approach of Laser Induced Fluorescence,SAE paper 961205,1996
[23] 息树和,张惠明,赵奎翰等,双成像高速摄影技术及其在柴油机燃烧研究中的应用,内燃机学报,1997,15(1):34~39
[24] Ricardo Consulting Engineers,Analysis of Steady Flow Tests on Inlet and Exhaust Ports,Dp. 93/0704
[25] Mayer K P,Swirl Measurement on the Stationary Flow Test Bench by Means of a Momentum Meter,AVL Report,Memo 618,1982
[26] Toshio Yamada,In-Cylinder Gas Motion of Multi-valve Engine—Three Dimensional Numerical Simulation,SAE paper 860465,1986
[27] Daniel C,Haworth,Multidimensional Port-and-Cylinder Flow Calculation for Two-and-Four-Per-Cylinder Engines:Influence of Intake Configuration on Flow Structure,SAE paper 900257,1990
[28] Iwamoto,The 1.5-Liter Vertical Vortex Engine,SAE paper 920670,1992
[29] Kuwaharak,Watanabet,Optimization of In-Cylinder Flow an Mixing for a Center-Spark Four-Valve Engine Employing the Concept of Barrel-Stratification,SAE paper 940986,1994
[30] Bae Choong-Sik,Kang Kern-Yong,The Correlation Between Flow and Combustion in a Four-Valve SI Engine, The First Asia-Pacific Conference on Combustion,Osaka,Japan,May 1997,12~15
[31] 李康,内燃机缸内空气运动的多维数值模拟,[博士学位论文],天津大学,1991
[32] 许思传,张建华,孙济美等,微机版内燃机缸内多维气流运动模拟程序 SUN-Ⅰ的开发,内燃机学报,1997,15(3):333~340
[33] 李玉锋,刘书亮,史绍熙等,提高四气门汽油机缸内滚流强度的研究,内燃机学报,1999,17(3):263~266
[34] 刘书亮,孙晓燕,史绍熙等,四气门汽油机中滚流运动的三维数值模拟,工程热物理学报,1999,20(1):116~120
[35] 夏兴兰,杨雄,朱忠伟等,数值模拟方法在柴油机进气道改进中的应用,内燃机学报,2002,20(5):424~428
[36] H.Jasak,Rapid CFD Simulation of Internal Combustion Engines,SAE Paper 1999-01-1185,1999
[37] 熊光楞,李伯虎,柴旭东,虚拟样机技术,系统仿真学报,2001,13(1):114~117
[38] Patankar S V, Numerical Heat Transfer and Fluid Flow,McGraw-Hill,1980
[39] 解茂昭,内燃机计算燃烧学,大连:大连理工大学出版社,2005
[40] Patrnkar S V,Spalding D B,A Calculation for Heat,Mass and Momentum Transfer in Three-Dimensional Parabolic Flow,Int. J. Heat Mass Transfer,1972,(15):1787~1806
[41] Issa R I,Gosman A D,Watkins A P,The Computation of Compressible and Incompressible Recirculating Flows by a Non-iterative Implicit Scheme,J. Comp. Phys.,1986,(62):66~82
[42] Issa R I ,Ahmadi Befrui B,Beshay K,Solution of The Implicitly Discretised Reacting Flow Equations by Operator-Splitting,J. Comp. Phys.,1991(93):388~410
[43] J C Kent,Observations on the Effects of Intake Generated Swirl and Tumble on Combustion Duration,SAE paper 892096,1989
[44] 刘书亮,宋飞舟,汽油机滚动涡流模拟试验台和滚流进气道的试验研究,内燃机工程,1995,16(4):1~9
[45] 裴普成,刘书亮,范永健,多气门汽油机滚流进气道结构的研究,内燃机学报,1998,(3):328~334
[46] Heywood J B,Internal Combustion Engine Fundamentals,Megrao-Hill Book Company,1988
[47] 傅晓光,毛羽,宋如刚等,CA1102 汽油机挤气射流燃烧室研究,燃烧科学与技术,2000,(2):161~165
[48] 李继军,赵慧,武德钰等,汽油机挤气射流—紊流型燃烧室压缩比优化的试验研究,内燃机学报,1999,17(4):419~420
[49] Connor J F,Mckinley N R,CFD Simulation of Intake Port Flow Using Automatic Mesh Generation:Compare with Laser Sheet, Swirl and LDA Measurements for Steady Flow Conditions,SAE Paper 980129,1998
[50] Omori S,Wachldo K I,Motomochi M,Effect of Intake Port Flow Pattern on the In-Cylinder Tumbling Air Flow in Multi-Valve SI Engines,SAE Paper 910477,1991
[51] Stone C R,Ladommatos N,The Measurement and Analysis of Swirl in Steady Flow,SAE Paper 921642,1992
[52] Andrew Mclandress,Roy Emerson,Philip Mcdowell,Intake and In-cylinder Flow Modeling Characterization of Mixing and Comparison with Flow Bench Results,SAE Paper 960635,1996
[53] 傅德薰,马延文,计算流体力学,北京:高等教育出版社,2002
[54] Yakhot V,Orszag S A,Renormalization Group Analysis of Turbulence. I. Basic Theory,Sci. Comput,1986(1):1~51
[55] Yakhot V,Development of Turbulence Models for Shear Flows by a Double Expansion Technique,Phys. Fluid,A 4:1515~1520,1992
[56] 马贵阳,谢茂昭等,内燃机缸内几种湍流流动涡粘度模型的比较,内燃机学报,2002,(5):433~437
[57] Fitzgeorge D,Allison J L,Air Swirl in a Road-Vehicle Diesel Engine,Proc Instn Mech Engrs (AD),1962/1963(4):151~168
[58] Ricardo Consulting Engineers,Analysis of Steady Flow Tests on Inlet and Exhaust Ports,Dp. 80/1123
[59] 蒋德明,内燃机原理,北京:机械工业出版社,1988
[60] Zhao Zhenwu,Liu Shuliang,Liu,Liu Dexin,Study on the Test Technology of Steady State Flow of Port with Variable Pressure Drop,Transactions of CSICE,2004,22(1):76~85
[61] 黄宜谅,内燃机性能与测试的研究,太原:山西科学技术出版社,2000,11~20
[62] 解茂昭,内燃机气缸内湍流运动的数值模拟,应用力学学报,1990,7(3):58~64
[63] 康秀玲,付光琦,祖炳锋等,4 气门柴油机进气特性的数值模拟和试验研究,内燃机学报,2003,21(3):261~264
[64] Shigeki Sugiura,Numerical Analysis of Flow in the Induction System of Internal Combustion Engine,SAE paper 900255,l990
[65] Pierre Godrie,Mark Zellat,Simulation of Flow Field Generated by Intake Port-Valve-Cylinder Configuration — Comparision With Measurements and Applications,SAE paper 940521,1994
[66] 祖炳锋,康秀玲,付光琦等,多气门发动机进、排气道的结构设计与评价,农业机械学报,2005,36(5):28~31
[67] Hadded,I Denbratt,Turbulence Characteristics of Air Motion in Four-valve SI Engines and Their Correlation With Combustion Parameters,SAE paper 910478,1991
[68] Kudou H,A Study about In-Cylinder Flow and Combustion in a 4-Valve S.I. Engine,SAE paper 920574,1992
[69] KUO T W,Multi-dimensional Port-and-Cylinder Gas Flow,Fuel Spray and Combustion Calculations for a Port-Fuel-Injection Engine , SAE Paper 920515,1992
[70] Ken Naitoh,Numerical Simulation of the Detailed Flow in Engine Ports and Cy1inders,SAE paper 900256,1990
[71] J R Arias,E Moreno,E Navarro,Using 1-D and 3-D Models for the Simulation of Gas Exchange Processes,SAE paper 2000-01-0658,2000
[72] 祖炳锋,康秀玲,付光琦等,车用四气门汽油机气道及缸内流场的瞬态模拟,天津大学学报,2005,38(11):975~980
[73] Rutland C J,Pieper C M,Hessel R,Intake and Cylinder Flow Modeling with a Dual-Valve Port,SAE paper 930069,1993
[74] 罗马吉,黄震,蒋炎坤等,内燃机进气过程多维数值模拟的研究,车用发动机,2003,(5):11~15
[75] Liu Shuliang,Li Yufeng,Lu Ming,Prediction of Tumble Speed in the Cylinder of the 4-valve,Spark-ignition Engines,SAE paper 2000-01-0247,2000
[76] 冯明志,李玉峰,孙晓燕等,四气门发动机缸内空气运动的试验和多维数值模拟计算,内燃机学报,1999,17(4):330~334
[77] 李玉峰,刘书亮,史绍熙等,四气门汽油机缸内滚流运动对燃烧过程影响的研究,工程热物理学报,1998,19(1):121~124
[78] J. Bohbot,F. A. Lafossas,A. Albrecht,A New Coupling Approach Using a 1D System Simulation Software and a 3D Combustion Code Applied to Transient Engine Operation,SAE paper 2004-01-3002,2004
[79] 刘永长,内燃机热力过程模拟,北京:机械工业出版社,2000
[80] 范维澄,万跃鹏,流动及燃烧的模型与计算,安徽:中国科学技术大学出版社,1992
[81] 陶文铨,计算传热学德近代进展,北京:科学出版社,2000
[82] G Fontana,E Galloni,R Palmaccio,Modeling of a Four-valve S.I. Engine Combustion:A Comparison of Two 3-D Computer Codes,SAE paper 2001-01-3235,2001
[83] Spalding D B,Mixing and Chemical Reaction on Steady Confined Turbulent Flames,12th Symposium (Internationa1) on Combustion,1971
[84] B Magnassen B F,Hjertager B H,On Mathematical Modeling of Turbulent Combustion with Special Emphasis on Soot Formation and Combustion,16th Symposium (Internationa1) on Combustion,1977
[85] T Kuo,R Reitz,Three-Dimendonal Computations of Combustion in Premixed Charge and Direct-Injected Two-Stroke Engines,SAE paper 920425,1992
[86] R Borghi,B Argueyrolles,Application of a “Presumed p.d.f. ” Model of Turbulent Combustion to Reciprocating Engines , 21st Symposium (International) on Combustion,1986
[87] W Cheng,J Diringer,Numerical Modelling of SI Engine Combustion with a Flame Sheet Mode1,SAE paper 910268,199l
[88] Ranasinghe J,Cant S,A Turbulent Combustion Model for a Stratified Charged,Spark Ignited Internal Combustion Engine,SAE paper 2000-01-0275,2000
[89] Tan Z,Kong S C,Reitz R D,Modeling Premixed and Direct Injection SI Engine Combustion Using the G-equation Model,SAE paper 2003-01-1843,2003
[90] Matthews R D,Chin Y W,Use Fractals to Model Turbulent Combustion in Spark Ignition Engines,SAE paper 910079,1991
[91] M.Jennings,Multi-Dimensional Modeling of Turbulent Premixeod Charge Combustion,SAE paper 920589,1992
[92] Weller H G,Uslu S,Gosman A D,Prediction of Combustion in Homogeneous Charge Spark-Ignition Engines,3rd Int. Symp. on Diagnostics and Modelling of Combustion in Internal Combustion Engines,Yokohama Japan,1994
[93] Marco Valério,Kuhlmann Raggi,José Ricardo Sodré,Improvement of a Model for Calculation of Oxides of Nitrogen Emissions from Spark Ignition Engines,SAE paper 2004-01-3001,2004
[94] 蒋德明,内燃机燃烧与排放学,西安:西安交通大学出版社,2001
[95] Baulch D L,Drysdall D D,Horne D G.,Evaluated Kinetic Data for High Temperature Reactions,Butterworth,1973
[96] Computational Dynamics adapco Group , STAR-CD Version 3.24 :Methodology,2004
[97] 蒋德明,火花点火式发动机的燃烧,西安:西安交通大学出版社,1992
[98] Senecai P K,Xin J,Reitz R D,Prediction of Residual Gas Fraction in IC Engines,SAE paper 962052,1996
[99] 宋金瓯,姚春德,姚广涛等,汽油机废气滚流分层技术对燃烧排放特性影响的研究,内燃机学报,2005,23(3):218~223
[100] Werner Hentachel,Peter Manz,Quantitative In-Cylinder NO LIF Measurements with a Exciter Laser Applied to a Mass-Production SI Engine Fueled with Isooctane and Regular Gasoline,SAE paper 970824,1997
[101] F Hildenbrand,C Schulz,Laser Spectroscopic investigation of Flow Fields and NO Formation in a Realistic SI Engine,SAE paper 980148,1998
[102] Ken Naitoh,Cycle Variation Analysis of Initial Flame Propagation Process in a Model Engine,SAE paper 2004-01-3007,2004
[103] 中华人民共和国国家环境保护总局,GB18352.3,轻型汽车污染物排放限值及测量方法(中国Ⅲ、Ⅳ阶段),北京:中国环境科学出版社,2005-04-15
[104] Walzer P,未来轿车用发动机,国外内燃机,2003(5):3-6
[105] Jun Harada,Tsutomu Tomita,Hroyuki Mizuno,Development of Direct Injection Gasoline Engine,SAE paper 970540,1997
[106] 杨世友,顾宏中,柴油机涡轮增压系统研究现状与进展,柴油机,2001,(4):1~5