飞机起落架抗疲劳制造工艺决策支持系统研究
|
摘要
随着我国大飞机工程的推进,飞机起落架设计、制造正朝着更安全、高可靠性、高技术的方向发展,以不断提高其抗疲劳性能,延长其使用寿命,因此,飞机起落架抗疲劳技术的研究具有十分重要的现实意义。本文对飞机起落架抗疲劳制造工艺决策支持系统开展研究,设计开发基于Web的飞机起落架抗疲劳制造工艺决策支持系统,实现其部分功能需求。
本文主要完成的研究内容如下:
(1)飞机起落架抗疲劳制造工艺决策支持系统总体结构的设计以决策支持系统、专家系统和智能推理技术为基础,根据系统的应用需求,基于J2EE技术构建了飞机起落架抗疲劳制造工艺决策支持系统总体结构,划分了系统的功能模块。
(2)系统数据源的设计实现对起落架抗疲劳制造工艺模型之间逻辑关系的定义,并根据抗疲劳制造工艺模型的不同类别,以树形层次结构的管理方式实现对起落架抗疲劳制造工艺模型的可视化管理。提出采用三维框架结构表示方法,对起落架抗疲劳制造工艺模型的特征信息建模,实现抗疲劳制造工艺模型的特征信息的可扩展性。
(3)飞机起落架抗疲劳制造工艺推理决策的设计与实现为实现系统的智能性、高效性,本文提出采用以基于飞机起落架抗疲劳制造工艺知识推理和基于飞机起落架抗疲劳制造工艺应用实例推理有机结合的混合推理机制,寻求最优的抗疲劳制造工艺,辅助起落架设计人员设计出抗疲劳性能高的起落架。
(4)系统及其关键技术开发实现研究了决策支持系统的开发环境和开发实现技术,详细讨论了基于Web的文档编辑、数学公式编辑以及动态树生成等关键技术,介绍了决策支持系统所实现的关键功能模块,验证了本文所研究的成果。
With the development of the large-scale aircraft project, the design and manufacture of aircraft landing gear trends to the direction of more safety, more reliability and high-technology, to improve anti-fatigue properties of its and lengthen its service-life.It becomes more and more important to study anti-fatigue technology for the aircraft landing gear. In this thesis, Web-based decision-making support system for anti-fatigue manufacturing process of aircraft landing gear is studied. The system structure is designed and some functions are implemented.
The major work of this paper completed is as follows:
(1)Design of the frame of decision-making support system for anti-fatigue manufacturing process of aircraft landing gear Based on decision-making support system, expert system and intelligent reasoning technology, and according to the application requirements of this system, a frame of decision-making support system for anti-fatigue manufacturing process of aircraft landing gear is built up on the J2EE technology platform, and the system’s functional modules is divided.
(2)Design of the data source of the system In the thesis, the logic relation of the anti-fatigue manufacturing process model is defined and the system implemented the visualized management of anti-fatigue manufacturing process models according to the category of them. By three-dimension frame structure, the anti-fatigue manufacturing process model’s feature information model is defined , to achieve the expandability of them.
(3)Design and implementation of reasoning decision for anti-fatigue manufacturing process of aircraft landing gear To make the system more intelligence and efficiency, a hybrid fast reasoning mechanism composed by anti-fatigue manufacturing knowledge-based reasoning and anti-fatigue manufacturing case-based reasoning is designed to find the optimal manufacturing process of anti-fatigue. It assist designer to design high anti-fatigue landing gear.
(4)Development and implement of the system and its key technology The decision-making support system development environment is introduced, and the key technology of the system development is detailed, such as Web-based document modification, mathematical formulas modification and the achievement of dynamic-tree generation.
本文主要完成的研究内容如下:
(1)飞机起落架抗疲劳制造工艺决策支持系统总体结构的设计以决策支持系统、专家系统和智能推理技术为基础,根据系统的应用需求,基于J2EE技术构建了飞机起落架抗疲劳制造工艺决策支持系统总体结构,划分了系统的功能模块。
(2)系统数据源的设计实现对起落架抗疲劳制造工艺模型之间逻辑关系的定义,并根据抗疲劳制造工艺模型的不同类别,以树形层次结构的管理方式实现对起落架抗疲劳制造工艺模型的可视化管理。提出采用三维框架结构表示方法,对起落架抗疲劳制造工艺模型的特征信息建模,实现抗疲劳制造工艺模型的特征信息的可扩展性。
(3)飞机起落架抗疲劳制造工艺推理决策的设计与实现为实现系统的智能性、高效性,本文提出采用以基于飞机起落架抗疲劳制造工艺知识推理和基于飞机起落架抗疲劳制造工艺应用实例推理有机结合的混合推理机制,寻求最优的抗疲劳制造工艺,辅助起落架设计人员设计出抗疲劳性能高的起落架。
(4)系统及其关键技术开发实现研究了决策支持系统的开发环境和开发实现技术,详细讨论了基于Web的文档编辑、数学公式编辑以及动态树生成等关键技术,介绍了决策支持系统所实现的关键功能模块,验证了本文所研究的成果。
With the development of the large-scale aircraft project, the design and manufacture of aircraft landing gear trends to the direction of more safety, more reliability and high-technology, to improve anti-fatigue properties of its and lengthen its service-life.It becomes more and more important to study anti-fatigue technology for the aircraft landing gear. In this thesis, Web-based decision-making support system for anti-fatigue manufacturing process of aircraft landing gear is studied. The system structure is designed and some functions are implemented.
The major work of this paper completed is as follows:
(1)Design of the frame of decision-making support system for anti-fatigue manufacturing process of aircraft landing gear Based on decision-making support system, expert system and intelligent reasoning technology, and according to the application requirements of this system, a frame of decision-making support system for anti-fatigue manufacturing process of aircraft landing gear is built up on the J2EE technology platform, and the system’s functional modules is divided.
(2)Design of the data source of the system In the thesis, the logic relation of the anti-fatigue manufacturing process model is defined and the system implemented the visualized management of anti-fatigue manufacturing process models according to the category of them. By three-dimension frame structure, the anti-fatigue manufacturing process model’s feature information model is defined , to achieve the expandability of them.
(3)Design and implementation of reasoning decision for anti-fatigue manufacturing process of aircraft landing gear To make the system more intelligence and efficiency, a hybrid fast reasoning mechanism composed by anti-fatigue manufacturing knowledge-based reasoning and anti-fatigue manufacturing case-based reasoning is designed to find the optimal manufacturing process of anti-fatigue. It assist designer to design high anti-fatigue landing gear.
(4)Development and implement of the system and its key technology The decision-making support system development environment is introduced, and the key technology of the system development is detailed, such as Web-based document modification, mathematical formulas modification and the achievement of dynamic-tree generation.
引文
[1]张明,王珉,左敦稳.抗疲劳制造技术的研究现状与发展趋势[J].机械设计与制造,2002, (2):100-101.
[2]韩金华.抗疲劳制造技术的研究与应用[J].南通航运职业技术学院学报,2004,3(4):45-46.
[3]吉倩.飞机起落架疲劳可靠性分析方法研究[D].南京:南京航空航天大学,2007.
[4]王珉.抗疲劳制造技术原理与技术[M].南京:江苏科学技术出版社,1999.
[5] Zhou Youli,Li Li,Wang kan,et al.An integrated ultrasonic deep rolling and burnishing technology for anti-fatigue manufacturing[J].2009,45(9):183-186.
[6]陈桦,顾振国.机械加工工艺手册软件版的设计与实现[J].精密制造与自动化,2003, (4):52-54.
[7]龚爱民,陈和潮.飞机起落架设计数据资源智能管理系统[J].洛阳工业高等专科学校学报,2007,17(5):40-42.
[8] Wu Yuxiang,Chan Christine W.A data analysis decision support system for the carbon dioxide capture process[J].Expert Systems with Applications,2009,36(6):9949-9960.
[9]滕利辉.决策支持系统的数据库开发[D].北京:华北电力大学,2007.
[10] Millet l,Gogan JL.A dialectical framework for problem structuring and information technology[J].Journal of the Operational Research Society,2006,57(4):434-442.
[11]高洪深.决策支持系统(DSS):理论.方法.案例(第3版)[M].北京:清华大学出版社,2005.
[12] Chuang TaTao.The development of an adaptive decision support system[J].Decision Support Systems,1998,24(2):73-87.
[13]黎锁平,严克明.关于决策支持系统(DSS内容体系的探析)[J].甘肃工业大学学报,1999, (25):66-68.
[14]傅铅生.信息系统分析与设计[M].北京:国防工业出版社,2005.
[15]蒋韶生.决策支持系统中数据仓库的研究与实现[D].长沙:中南大学,2005.
[16]方卫国,周泓.组织决策及其支持系统的分析与设计[J].系统工程理论与实践,1999,19(7):1-5,16.
[17]方卫国,周泓.分布式智能决策支持系统设计研究.系统工程理论与实践[J],1999,19(6):16-21.
[18]彭雁虹,李怀祖.面向高层决策支持决策全过程的应用系统集成[J].管理科学学报,1998,1(2):73-79.
[19]高青.决策支持系统在现代制造领域的发展新阶段[J].山西科技,2008, (4):34-35,38.
[20]罗红专.现代抗疲劳制造原理与技术概论[J].中国科技信息,2005, (6):128-129.
[21]孙志礼,蔡春源,潘尔顺.无限寿命的应力——寿命可靠度模型[J].机械设计与制造.1997, (1):6-8.
[22]赵乃素,孙志礼.有限寿命疲劳可靠度计算的新方法[J].东北工学院学报.1992,13(5):483-488.
[23]岳勇.风力发电机组机械零部件抗疲劳设计方法的研究[D].新疆:新疆农业大学,2005.
[24]杜洪奎,袁昌明.螺栓疲劳寿命预测[J].机械设计.2008,25(2):10-12.
[25]贺书乾.破坏概率法在疲劳分析中的应用[J].水利电力机械.2007,29(4):34-35,59.
[26]于强.断裂力学法研究多轴疲劳裂纹扩展的速度[J].四川理工学院学报.2008,21(6):29-32.
[27]王晓锋.船舶维修决策支持系统的研究与实现[D].大连:大连海事大学,2000.
[28]徐九华,王珉.高强度钢内螺纹冷挤压强化研究[J].材料工程,2000,(4):41-44.
[29]宋德玉等.内螺纹滚压强化对超高强度钢疲劳性能的影响[J].航空学报,1995,16(5):619-622.
[30]李诚,刘传绍.表面光整加工技术及其发展趋势[J].矿山机械,2007,35(11):143-145.
[31]宋德玉等.韧化处理300M钢的孔挤压强化机制[J].航空材料学报,1995,15(1):22-27.
[32]朱荆璞.金属表面强化技术[M].北京:机械工业出版社,1989.
[33]康增桥,盖秀颖,李家宝等.残余应力和表面形态对60Mn疲劳性能的影响[J].金属学报,1992,28(6):A276-A282.
[34]何家文,胡奈赛,张定铨.残余应力集中及其对疲劳极限和短裂纹扩展的影响[J].金属学报,1992,28(9):A404-A408.
[35] Newman.J.C.Jr.A crack closure model for predicting fatigue crack growth under aircraft spectrum loading Methods and models for predicting fatigue crack growth under random loading[C].ASTM STP748.Baltimore:American Society for Testing and Materials, 1981:53-80.
[36] Newman.J.C.Jr.Prediction of fatigue-crack growth under variable amplitude and spectrum loading using a closure model design of fatigue and fracture resistant structure[C].ASTM STP761.Baltimore:American Society for Testing and Materials,1982:255-277.
[37] Barzoukas.H,Janffret.J.Peening with ceramic shot[C].Proceeding of ICSP-4.Tokyo:1990:47-56.
[38] Fuchs.H.O.Optimum peening intensities[C].Proceeding of ICSP-3,Germany:1987:639-646.
[39]徐九华,王珉,金问林等.300M钢制内螺纹冷挤压研究[J].航空学报,1993,14(10):B557-B559.
[40] G.H. Majzoobi,J. Nemati,A.J. Novin Rooz,et al.Modification of fretting fatigue behavior of AL7075–T6 alloy by the application of titanium coating using IBED technique and shot peening[J].Tribology International,2009,1(42):121-129.
[41] J. Hong,J.Y. Ooi, B. Shaw.A numerical simulation to relate the shot peening parameters to the induced residual stresses[J].Engineering Failure Analysis,2008,8(15):1097-1110.
[42]杨务滋,杨国庆,周立强.冷挤压有限元分析[J].凿岩机械气动工具.2003, (4):41-44.
[43] J C Choi,C Kim.An integrated design and CAPP system for cold or hot forging products [J]. The International Journal of Advanced Manufacturing Technology,2000,16 (10):720-727.
[44] J. Liu,X.J. Shao,Y.S. Liu,et al.Effect of cold expansion on fatigue performance of open holes[J].Materials Science and Engineering,2008,3,477(1-2):271-276.
[45]傅仕伟.孔的冷挤压抗疲劳增寿机理研究[D].南京航空航天大学硕士学位论文.1996.
[46] Gruber TR.Toward Principles for the Design of Ontologies Used for Knowledge Sharing[J].International Journal of Human-computer Studies,1995,43(5-6):907-928.
[47] Rita Almeida,Gameiro-Marques.Fuzzy Sets and System:A fuzzy decision support system for equipment repair under battle conditions,2000,115(1):141-157.
[48]陈文伟.智能决策技术[M].北京:电子工业出版社,1998.
[49] Sprague R.Decision support systems:putting theory into practice[M] .Englewood Cliffs,N.J:Prentice-Hall,1989:9-31.
[50]应济,江力,泮双夏.基于实例推理的设计问题求解系统[J].中国机械工程,1998,10 (5):555-558.
[51] Wang W.M,Cheung C.F,Lee W.B,et al.Knowledge-based treatment planning for adolescent early intervention of mental healthcare:A hybrid case-based reasoning approach[J].2007,24(4):232-251.
[52]史忠植.高级人工智能(第二版)[M].北京:科学出版社,2006.
[53]吴志成.面向设计重用的船舶传动装置数据库研究与实现[D].南京:南京航空航天大学,2009.
[54]冯博.J2EE1.4程序设计教程[M].北京:清华大学出版社,2005.
[55]张丹.企业信息编码及其管理系统的研究与开发[D].南京:京航空航天大学,2007.
[56]涂成义.面向快速设计的装配工装管理系统的研究与开发[D].南京:南京航空航天大学,2008.
[57]马锐,尤定华.决策支持系统开发工具的模型管理技术[J].北京理工大学学报,2001, 21(2):229-231.
[58]李京,孙颖博,刘智深等.模型库管理系统的设计与实现[J].软件学报,1998,9(8):17-19.
[59]冯玉才.数据库系统基础(第二版)[M].武汉:华中科技大学出版社,1993.
[60]宫爱红.汽车模具高速切削工艺参数数据库系统的设计[D].武汉:华中科技大学,2006.
[61]王亚平.数据库系统工程师教程[M].北京:清华大学出版社,2004.
[62]胡虹.汽轮发电机异构开发环境的数据库设计及系统实现[D].上海:同济大学,2007.
[63] Aamodt Agnar,Plaza Enric.Case-Based Reasoning:Foundation Issues,Methodological Variations,and System Approaches.AI Communicaion,1994,7(1):39-59.
[64]刘普寅,吴孟达.模糊理论及其应用[M].长沙:国防科技大学出版社,2001.
[65] Kohl N,Madsen OBG.An optimization algorithm for the vehicle routing problem with time windows based on lagrangian relaxation[J].Opns Res,1997,45(3):395-406.
[66] Mahapatra R,Sen A.Case base management systems:providing database support to case-based reasoners[J].Journal of Database Management,1994,5(2):19-29.
[67] T warren Liao,Zhiming Zhang.Similarity Measures for Retrieval in CBR[J].Applied Artificial Intelligence,1998,12(4):267-288.
[68]张桂元,贾燕枫,姜波.征服Ajax Web 2.0-快速入门与项目实践[M].北京:人民邮电出版社,2006.
[69]格雷恩等.Ajax实战[M].北京:人民邮电出版社,2008.
[70]刘增才,李晓霞,袁小龙等.基于SSH+ExtJS架构的化学数据知识框架管理[J].计算机与应用化学,2008,25(9):1147-1151.
[71]石为人,张星等.关系型数据库BOM表的遍历算法的改进及实现[J].重庆大学学报(自然科学版),2005,28(7):82-85.
[72]李长学.PDM系统中产品结构树的开发研究[J].微型电脑应用,2007,23(5):14-15.
[2]韩金华.抗疲劳制造技术的研究与应用[J].南通航运职业技术学院学报,2004,3(4):45-46.
[3]吉倩.飞机起落架疲劳可靠性分析方法研究[D].南京:南京航空航天大学,2007.
[4]王珉.抗疲劳制造技术原理与技术[M].南京:江苏科学技术出版社,1999.
[5] Zhou Youli,Li Li,Wang kan,et al.An integrated ultrasonic deep rolling and burnishing technology for anti-fatigue manufacturing[J].2009,45(9):183-186.
[6]陈桦,顾振国.机械加工工艺手册软件版的设计与实现[J].精密制造与自动化,2003, (4):52-54.
[7]龚爱民,陈和潮.飞机起落架设计数据资源智能管理系统[J].洛阳工业高等专科学校学报,2007,17(5):40-42.
[8] Wu Yuxiang,Chan Christine W.A data analysis decision support system for the carbon dioxide capture process[J].Expert Systems with Applications,2009,36(6):9949-9960.
[9]滕利辉.决策支持系统的数据库开发[D].北京:华北电力大学,2007.
[10] Millet l,Gogan JL.A dialectical framework for problem structuring and information technology[J].Journal of the Operational Research Society,2006,57(4):434-442.
[11]高洪深.决策支持系统(DSS):理论.方法.案例(第3版)[M].北京:清华大学出版社,2005.
[12] Chuang TaTao.The development of an adaptive decision support system[J].Decision Support Systems,1998,24(2):73-87.
[13]黎锁平,严克明.关于决策支持系统(DSS内容体系的探析)[J].甘肃工业大学学报,1999, (25):66-68.
[14]傅铅生.信息系统分析与设计[M].北京:国防工业出版社,2005.
[15]蒋韶生.决策支持系统中数据仓库的研究与实现[D].长沙:中南大学,2005.
[16]方卫国,周泓.组织决策及其支持系统的分析与设计[J].系统工程理论与实践,1999,19(7):1-5,16.
[17]方卫国,周泓.分布式智能决策支持系统设计研究.系统工程理论与实践[J],1999,19(6):16-21.
[18]彭雁虹,李怀祖.面向高层决策支持决策全过程的应用系统集成[J].管理科学学报,1998,1(2):73-79.
[19]高青.决策支持系统在现代制造领域的发展新阶段[J].山西科技,2008, (4):34-35,38.
[20]罗红专.现代抗疲劳制造原理与技术概论[J].中国科技信息,2005, (6):128-129.
[21]孙志礼,蔡春源,潘尔顺.无限寿命的应力——寿命可靠度模型[J].机械设计与制造.1997, (1):6-8.
[22]赵乃素,孙志礼.有限寿命疲劳可靠度计算的新方法[J].东北工学院学报.1992,13(5):483-488.
[23]岳勇.风力发电机组机械零部件抗疲劳设计方法的研究[D].新疆:新疆农业大学,2005.
[24]杜洪奎,袁昌明.螺栓疲劳寿命预测[J].机械设计.2008,25(2):10-12.
[25]贺书乾.破坏概率法在疲劳分析中的应用[J].水利电力机械.2007,29(4):34-35,59.
[26]于强.断裂力学法研究多轴疲劳裂纹扩展的速度[J].四川理工学院学报.2008,21(6):29-32.
[27]王晓锋.船舶维修决策支持系统的研究与实现[D].大连:大连海事大学,2000.
[28]徐九华,王珉.高强度钢内螺纹冷挤压强化研究[J].材料工程,2000,(4):41-44.
[29]宋德玉等.内螺纹滚压强化对超高强度钢疲劳性能的影响[J].航空学报,1995,16(5):619-622.
[30]李诚,刘传绍.表面光整加工技术及其发展趋势[J].矿山机械,2007,35(11):143-145.
[31]宋德玉等.韧化处理300M钢的孔挤压强化机制[J].航空材料学报,1995,15(1):22-27.
[32]朱荆璞.金属表面强化技术[M].北京:机械工业出版社,1989.
[33]康增桥,盖秀颖,李家宝等.残余应力和表面形态对60Mn疲劳性能的影响[J].金属学报,1992,28(6):A276-A282.
[34]何家文,胡奈赛,张定铨.残余应力集中及其对疲劳极限和短裂纹扩展的影响[J].金属学报,1992,28(9):A404-A408.
[35] Newman.J.C.Jr.A crack closure model for predicting fatigue crack growth under aircraft spectrum loading Methods and models for predicting fatigue crack growth under random loading[C].ASTM STP748.Baltimore:American Society for Testing and Materials, 1981:53-80.
[36] Newman.J.C.Jr.Prediction of fatigue-crack growth under variable amplitude and spectrum loading using a closure model design of fatigue and fracture resistant structure[C].ASTM STP761.Baltimore:American Society for Testing and Materials,1982:255-277.
[37] Barzoukas.H,Janffret.J.Peening with ceramic shot[C].Proceeding of ICSP-4.Tokyo:1990:47-56.
[38] Fuchs.H.O.Optimum peening intensities[C].Proceeding of ICSP-3,Germany:1987:639-646.
[39]徐九华,王珉,金问林等.300M钢制内螺纹冷挤压研究[J].航空学报,1993,14(10):B557-B559.
[40] G.H. Majzoobi,J. Nemati,A.J. Novin Rooz,et al.Modification of fretting fatigue behavior of AL7075–T6 alloy by the application of titanium coating using IBED technique and shot peening[J].Tribology International,2009,1(42):121-129.
[41] J. Hong,J.Y. Ooi, B. Shaw.A numerical simulation to relate the shot peening parameters to the induced residual stresses[J].Engineering Failure Analysis,2008,8(15):1097-1110.
[42]杨务滋,杨国庆,周立强.冷挤压有限元分析[J].凿岩机械气动工具.2003, (4):41-44.
[43] J C Choi,C Kim.An integrated design and CAPP system for cold or hot forging products [J]. The International Journal of Advanced Manufacturing Technology,2000,16 (10):720-727.
[44] J. Liu,X.J. Shao,Y.S. Liu,et al.Effect of cold expansion on fatigue performance of open holes[J].Materials Science and Engineering,2008,3,477(1-2):271-276.
[45]傅仕伟.孔的冷挤压抗疲劳增寿机理研究[D].南京航空航天大学硕士学位论文.1996.
[46] Gruber TR.Toward Principles for the Design of Ontologies Used for Knowledge Sharing[J].International Journal of Human-computer Studies,1995,43(5-6):907-928.
[47] Rita Almeida,Gameiro-Marques.Fuzzy Sets and System:A fuzzy decision support system for equipment repair under battle conditions,2000,115(1):141-157.
[48]陈文伟.智能决策技术[M].北京:电子工业出版社,1998.
[49] Sprague R.Decision support systems:putting theory into practice[M] .Englewood Cliffs,N.J:Prentice-Hall,1989:9-31.
[50]应济,江力,泮双夏.基于实例推理的设计问题求解系统[J].中国机械工程,1998,10 (5):555-558.
[51] Wang W.M,Cheung C.F,Lee W.B,et al.Knowledge-based treatment planning for adolescent early intervention of mental healthcare:A hybrid case-based reasoning approach[J].2007,24(4):232-251.
[52]史忠植.高级人工智能(第二版)[M].北京:科学出版社,2006.
[53]吴志成.面向设计重用的船舶传动装置数据库研究与实现[D].南京:南京航空航天大学,2009.
[54]冯博.J2EE1.4程序设计教程[M].北京:清华大学出版社,2005.
[55]张丹.企业信息编码及其管理系统的研究与开发[D].南京:京航空航天大学,2007.
[56]涂成义.面向快速设计的装配工装管理系统的研究与开发[D].南京:南京航空航天大学,2008.
[57]马锐,尤定华.决策支持系统开发工具的模型管理技术[J].北京理工大学学报,2001, 21(2):229-231.
[58]李京,孙颖博,刘智深等.模型库管理系统的设计与实现[J].软件学报,1998,9(8):17-19.
[59]冯玉才.数据库系统基础(第二版)[M].武汉:华中科技大学出版社,1993.
[60]宫爱红.汽车模具高速切削工艺参数数据库系统的设计[D].武汉:华中科技大学,2006.
[61]王亚平.数据库系统工程师教程[M].北京:清华大学出版社,2004.
[62]胡虹.汽轮发电机异构开发环境的数据库设计及系统实现[D].上海:同济大学,2007.
[63] Aamodt Agnar,Plaza Enric.Case-Based Reasoning:Foundation Issues,Methodological Variations,and System Approaches.AI Communicaion,1994,7(1):39-59.
[64]刘普寅,吴孟达.模糊理论及其应用[M].长沙:国防科技大学出版社,2001.
[65] Kohl N,Madsen OBG.An optimization algorithm for the vehicle routing problem with time windows based on lagrangian relaxation[J].Opns Res,1997,45(3):395-406.
[66] Mahapatra R,Sen A.Case base management systems:providing database support to case-based reasoners[J].Journal of Database Management,1994,5(2):19-29.
[67] T warren Liao,Zhiming Zhang.Similarity Measures for Retrieval in CBR[J].Applied Artificial Intelligence,1998,12(4):267-288.
[68]张桂元,贾燕枫,姜波.征服Ajax Web 2.0-快速入门与项目实践[M].北京:人民邮电出版社,2006.
[69]格雷恩等.Ajax实战[M].北京:人民邮电出版社,2008.
[70]刘增才,李晓霞,袁小龙等.基于SSH+ExtJS架构的化学数据知识框架管理[J].计算机与应用化学,2008,25(9):1147-1151.
[71]石为人,张星等.关系型数据库BOM表的遍历算法的改进及实现[J].重庆大学学报(自然科学版),2005,28(7):82-85.
[72]李长学.PDM系统中产品结构树的开发研究[J].微型电脑应用,2007,23(5):14-15.