APFC电路的计算辅助设计与仿真研究
详细信息    本馆镜像全文|  推荐本文 |  |   获取CNKI官网全文
摘要
本文在对一系列APFC电路设计、仿真分析方法讨论比较的基础上,着重应用离散时域法进行了计算机辅助电路设计和仿真方法的应用探索,以此为基础设计了PFC EXPERT功率因数校正电路设计、仿真软件,针对实际电路给出了整个设计和仿真全过程,通过实验验证了该软件所得到的精确稳态解、瞬态输出电压和电感电流,与实际电路输出基本相同,所建立的电路模型重现了电路的运行过程,反映了电路的实际工作机理。
This paper discusses the compare of a series of power factor correct circuit design and simulation method.. And at this foundation through the Dispersed Domine Analyse the paper makes a great emphasis on the application of computer aided design and simulation, then designs a series of APFC design and simulation software. This paper takes out a set of designation and simulation on base of actual circuit. The reliable result, output voltage and inductance current which are got from this software are the same as the actual value. The model of circuit recurs the running course and reflects the working mechanism of the actual circuit.
引文
[1] 吴竞昌主编.供电系统谐波.中国电力出版社,1998年5月.
    [2] 陈道烁,严仰光.有源功率因数校正技术及应用.电工技术杂志,1997年第1期.
    [3] 张占松,孙时生等编著.电路和系统的仿真实践.科学出版社,2000年1月.
    [4] Graham Prophet.软件是开关电源稳压电源设计的关键.中国电子设计技术,2001年12月30日.
    [5] 李永平.APFC电路并联均流技术的应用研究.(学位论文),2002年6月.
    [6] 刘希禹.开关电源的功率因数和输入谐波电流.邮电设计技术,1996年第3期.
    [7] 林雯.UC3854控制PFC电路的分析、实验、仿真及CAD系统设计.(学位论文),1998年6月.
    [8] 梁元钊.单相中功率PFC电路的研究、设计、仿真.(学位论文),2001年6月.
    [9] Henry Shu-hung Chung, Adrian Ioinovici. Fast Computer-Aided Simulation of Switching Power Regulators Based on Progressive Analysis of the Switches'State. IEEE TRANS ON POWER ELECTRONICS. VOL 9. NO.2. MARCH 1994.
    [10] 蔡宣三,龚绍文编著.高频功率电子学——直流-直流变换部分.北京:科学出版社,1993年5月.
    [11] 陈艳峰,邱水生等.PWM开关功率变换器分析与仿真方法简述.电机与控制学报,1999年9月第3卷第3期.
    [12] MIDDLEBROOK R D,CUK S. A general unified approach to modeling switching-converters power stages. IEEE PESC Rec. 1976 18-34.
    [13] 张兴柱,黄是鹏.等效受控源平均法与开关式变换器的模型.电杂志,1986,(3):1~14.
    [14] 丘水生.开关功率变换器符号分析方法的原理.电子学报,1997年第1期.
    [15] S.S.Kelar and F.C.Lee, A Fast Time Domain Digital Technique for Power Converters—Application to Buck Converter with Feedforward Compensation, IEEE PESC Record, 1984, 281-296.
    [16] 肖田元,张燕云等.系统仿真导论.清华大学出版社,2000年7月.
    [17] 侯振义,侯传教.UC3854功率因数校正IC及其应用设计.电源技术应用,1998年4月第1期.
    [18] 王博明.PFC模块的损耗分析及热设计研究.(学位论文),2001年6月.
    [19] 石平.开关型稳压电源系统可靠性的研究.桂林电子工业学院学报,1998年6月第18卷第2期.
    [20] Philip C. Todd. UC3854 Controlled Power Factor Corection Circuit Design. Unitrode Linear Integrated Circuit Product & Applications Handbook, 1995-96.
    [21] Vatche Vorperlan. Simplified Analysis of PWM Converters Using Model of PWM Switch Part 1: Continuous Conduction Mode. IEEE TRANS ON AEROSPACE AND ELECTRONIC SYSTEMS VOL.26, NO.3 MAY 1990.
    [22] 孔凡东,易传锐.UC3854在有源功率因数校正电路中的应用.国外电子元器件,1998年9月第9期.
    [23] M K. Nallbant. Theory and Application of the ML4821 Average Current Mode PFC Controller. Micro Linear Application Note 16, Auguse 1997.
    
    
    [24] David Bedrosian, Jiri Vlach. Time-Domain Analysis of Nerworks with Internally Controlled Switches. IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS. VOL.39, NO.3, MARCH 1992.
    [25] James P. Noon. UC3855A/B High Performance Power Factor Preregulator, Unitrode Application Note, U-153.
    [26] Bill Andreycak. OPTIMIZING PREFORMANCE IN UC3854 POWER FACTOR CORRECTION APPLICATION. Unitrode-linear Integrated Circuit Product & Applications Handbook, 1995-96.
    [27] Henrique A. C. Braga, Ivo Barbi. A New Technique for Parallel Connection of Commutation Cells: Analysis, Design, and Experimentation, IEEE TRANSACTIONS ON POWER ELECTRONICS. VOL 12, NO.2, MARCH 1997.
    [28] 龚春英,刘煜,肖岚.几种MOSFET驱动电路的研究.电源技术应用,2000年6月.
    [29] 包成良.电子元器件标准化现状与思考.光纤与电缆及其应用技术,1998年第2期.
    [30] 王德阮.电子元器件实用知识讲座.器件与元件,1996年第4期.
    [31] 张力编著.Visual C++高级编程.人民邮电出版社,2002年3月.
    [32] 何强,何英编著.Matlab扩展编程.清华大学出版社,2002年6月.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700