硅烷偶联剂改性花岗岩骨料与水泥浆作用机理研究
详细信息    本馆镜像全文|  推荐本文 |  |   获取CNKI官网全文
摘要
力学实验表明,硅烷偶联剂(SCA)可显著提高花岗岩/水泥浆界面层粘结强度,为了给SCA改性混凝土的工程应用提供技术支持,本文采用三因素五水平正交设计方法,研究了SCA浓度、醇水比、浸泡时间,以及各因素之间交互作用对SCA改性花岗岩骨料混凝土立方体抗压强度的影响,确定了最优的配方。结果表明:醇水比4:1、浸泡时间1min、SCA浓度0.5%~1%时改性效果最佳。
     红外光谱(FTIR)和X射线能谱(XPS)实验已经证实SCA与花岗岩之间形成了较牢固的结合,但花岗岩表面SCA与水泥浆作用机理尚不清楚,为深入探讨SCA显著提高花岗岩/水泥浆界面粘结强度的机理,本文设计了一种新的实验方法,让水泥水化物直接在骨料表面沉积成晶,并用扫描电镜(SEM)观察表面结晶水泥水化物的形貌,用X射线衍射仪(XRD)观测表面结晶产物中Ca(OH)_2的含量和取向性,用XPS观测表面结晶水泥水化物各元素结合能的变化情况。微观实验结果表明:SCA改性对骨料—水泥浆界面过渡区的形成有重要影响;SCA改性前后花岗岩表面结晶水泥水化产物各元素结合能没有发生变化。
Mechanical testing shows that interfacial bond strength between SCA-soaked granite andcement paste is extremely improved. In order to provide technology support for the practicalapplication of SCA modified concrete, a three-factor-five-level orthogonal design was set toinvestigate the influence of SCA concentration、ratio of ethanol / water、dipping time and theinteractions among the factors on concrete compressive strength with SCA modified graniteaggregates. The result shows that a combination of ethanol / water 4:1, dipping 1 min and SCAconcentration of 0.5%~1% yields an optimum solution.
     FTIR and XPS experiment has already identified that strong bonds can be formed betweenSCA and granite surface, but the action mechanism between SCA modified granite surface andcement pastes is still unknown. For deeply investigating the modifying mechanism of theinterfacial bond strength between SCA-soaked granite and cement paste, a new experimentalmethod to simulate crystallization of cement hydration products on aggregates surface wasdeveloped. The crystal morphology of the cement hydration products is observed by SEM; thecontents and orientation of Ca(OH)_2 on aggregate surface are observed by XRD; the chemicalshifts of each crystal cement hydration products element on aggregate surface by XPS. The resultshows that the SCA modification has an important influence on the formation ofaggregates-cement paste interfacial transition zone; no chemical shifts of crystal cementhydration products element is produced.
引文
[1] Mehta P K. Greening of the Concrete Industry for Sustainable Development. Concrete International, 2002.
    [2] 赵霄龙,巴恒静,普通强度高耐久性混凝土的配制技术,建筑技术,2004,35(1):26—29
    [3] 王铁宏,王有为,崔建友,李军,在可持续发展战略思维下对我国建设事业科技进步的几点意见与建议,建筑科学,2004,20(1):1—7
    [4] 冯乃谦,普通混凝土、高强混凝土与高性能混凝土,建筑技术,2004(1):20-23
    [5] Mehta P K. Concrete in the Marine Environment, Elsevier, Applied Science, 1991
    [6] MASO J C. The Bond Between Aggregates and Hydrated Cement Pastes[A]. In: Proceedings of 7th International Congress on the Chemistry of Cement[C]. Vol 3, Paris: Septima, 1980. Ⅶ-1/3-Ⅶ-1/15
    [7] imbelman R. Contribution of Cement-Aggregate Bond[J]. Cem.Concr.Res. 1985, 15(5): 801-808
    [8] SO J C, Bourdette B. Interracial Transition Zone in Concrete[J]. Adv Cem Based Mater, 1995, 2(1):30-38
    [9] G.Prokopski, J.Halbiniak. Interfacial Transition Zone in cementitious materials. Cem.Concr.Res. 2000,(30):579-583
    [10] Dannys B, Gerard B, Jacques G. Contribution to the formation mechanism of the transition zone between rock-cement pastes. C.C.R.,1993,23:335-346
    [11] 陈惠苏,孙伟,Stroeven Piet.水泥基复合材料集料与浆体界面研究综述(一):实验技术,(二):界面微观结构的形成、劣化机理及其影响因素,硅酸盐学报,2004,32(1):63-69,70-79
    [12] 姚燕,新型高性能混凝土的研究与应用,中国硅酸盐学会 2003年学术年会水泥基材料论文集(下册),1
    [13] G. A. Rao, B. K. R. Prasad. Influence of the roughness of aggregate surface on the interface bond strength, Cement and Concrete Research, 2002(32): 253-257
    [14] Yan, K. R. Wu, D. Zhang, W. Yao. Influence of concrete composition on the characterization of fracture surface, Cement and Concrete Composites, 2003(25): 153-157
    [15] M Boulfiza, K Sakai et al. Prediction of Chloride Ions Ingress in Untracked and Cracked Concrete, ACI Materials Journal, 2003, 100(1): 38-48
    [16] G. J. Xiong, J. W. Liu, G. Y. Li, H. C. Xie. A Way for Improving Interfacial Transition Zone between Repair Material and Concrete Substrate, Cement and Concrete Research, 2002(12): 1877-1881
    [17] 熊光晶,姜浩,陈立强等.新老混凝土修补界面过渡区微细观结构改善方法的研究,硅酸盐学报,2002(2):2263-2266
    [18] 杨久俊,董延玲,海然,吴科如.骨料表面化学预处理对界面区组分梯度分布和混凝土力学性能的影响,Ⅰ:骨料化学预处理对其表面特性与界面过渡区结构的影响,Ⅱ骨料化学预处理对混凝土力 学性能的改善.混凝土与水泥制品,2003(6):1-5,2004(1):15-17
    [19] 丁大均,高性能混凝土工程特性(一),工业建筑,1996,26(10):47—52
    [20] 马一平,提高水泥石—集料界面粘结强度的研究,建筑材料学报,1999(1):29-32
    [21] 肖庆一,钱春香,解建光,偶联剂改善沥青混凝土性能及油石界面实验研究.东南大学学报(自然科学版),2004,34(4):485-489
    [22] 邬翔,熊光晶.硅烷偶联剂溶液浓度对新老混凝土粘结界面层拉拔强度的影响.混凝土与水泥制品.2003(3):18-19
    [23] 熊光晶,李毅强,罗白云,崔玉清,硅烷偶联剂显著改善大粒径骨料混凝土性能的可能性,建筑技术开发,2004,31(4):37-39
    [24] 李毅强,熊光晶.水泥浆/花岗岩的界面偶联机理初探.华中科技大学学报(自然科学版),2004,32(11):94—96
    [25] 李屹立,熊光晶,李毅强,温度和浸泡时间对花岗岩/偶联剂/水泥浆界面层劈拉强度的影响,建筑技术开发,2006,33(1)
    [26] 李毅强,吴涛,熊光晶.硅烷偶联剂改性大粒径花岗岩骨料混凝土初探.建筑技术开发.2004,31(11):41—42
    [27] 李屹立,陆小华,冯玉龙,熊光品,花岗岩/硅烷偶联剂/水泥浆界面层形成机理,材料研究学报,2007,21(2):140—144
    [28] Plueddemann, E.P. Silane Coupling Agent[M]. 1st ed. New York: Plenum Press, 1982
    [29] 胡福增,陈国荣,杜永娟.材料表界面.华东理工大学出版社,2001
    [30] 黄从运,龙世宗.偶联剂KH和聚合物PVA在硫铝酸盐—MDF水泥中的作用机理.材料研究学报,1994,8(2):158—162
    [31] 曾智强,萧小月,桂治轮,李龙土.Al2O3—SiO2—TiO2薄膜的表面改性—偶联剂反应.材料研究学报,1999,13(2):125—128
    [32] 黄从运,袁润章,龙世宗.钛酸脂偶联剂NDZ—3与3(CaO·Al2O3)·CaSO4界面的XPS研究.硅酸盐学报,2003,31(8):780—783
    [33] 刘铁军,欧进萍,李家和.硅粉的硅烷化对水泥砂浆阻尼性能的影响.硅酸盐学报,2003,31(11):1125—1129
    [34] 冯长根,蔡佩君,张林,唐永健.氧化铝表面有机改性及其在聚苯乙烯中分散性能的研究.北京理工大学学报,2003,23(5):645—648
    [35] 牛光良,王同,徐恒昌,沈德言.硅烷偶联剂γ-MPS在钡玻璃表面吸附机制的研究.中老年口腔医学杂志,2003,1(1):5—8
    [36] 李屹立,花岗岩/硅烷偶联剂/水泥浆界面层形成机理研究,汕头大学硕士学位论文,2006
    [37] 周玉,材料分析方法,机械工业出版社,2000,130—175
    [38] 夏佩芬,王培铭等,混合材料与水泥浆体间界面的形貌特征,硅酸盐学报,1997,25(6): 738—742
    [39] 张洪滔,李永鑫,董刚,陈益民,海水对修补混凝土界面层微观结构的影,电子显微学报,2006,25:173—174
    [40] 叶青,张泽南,陈荣升,马成畅,纳米SiO2与水泥硬化浆体中Ca(OH)2的反应,硅酸盐学报,2003,31(5):517—522
    [41] 胡曙光,王发洲,丁庆军,轻集料与水泥石的界面结构,硅酸盐学报,2005,33(6):713—717
    [42] 赵文俞,王勤燕,陈文怡,聚合物共混物对水泥石—石英界面结构影响的机理,建筑材料学报,2000,3(1):59—63
    [43] 毋伟,陈建峰,屈一新.硅烷偶联剂的种类与结构对二氧化硅表面聚合物接枝改性的影响.硅酸盐学报,2004,32(5):570—575
    [44] 郑兆佳,胡缙昌,玻璃表面改性的XPS研究,表面技术,1999,28(5):7—9
    [45] 古凤才,赵竹萱,李英慧等.表面修饰二氧化锡纳米微晶的制备与表征.物理化学学报,2003,19(7):621—625
    [46] L.Black, K.Garbev, P.Stemmermann, K.R.Hallam, G.C.Allen. Characterisation of crystalline C-S-H phase by X-ray photoelectron spectroscopy (XPS), Cem.Concr.Res.2003,33(6): 899-911
    [47] L.Black, K.Garbev, P.Stemmermann, K.R.Hallam, G.C.Allen. X-ray photoelectron study of oxygen bonding in crystalline C-S-H phase, Phys.Chem.Minerals,2004,31:337-346
    [48] L.Black, A.Stumm, K.Garbev, P.Stemmermann, K.R.Hallam, G.C.Allen. X-ray photoelectron spectroscopy of aluminium-substituted tobermorite. Cem.Concr.Res.2005,35(1): 51-55
    [49] 蔡正泳,王足献,正交设计在混凝土中的应用,中国建筑工业出版社,1985,24—126
    [50] 耿修林,谢兆茹,应用统计学[专著],科学出版社,2002.7,290—342
    [51] 徐溢,王楠,张小凤等,直接用作金属表面新型防护涂层的硅烷偶联剂水解效果分析,腐蚀和防护,2000,21(4):157—159
    [52] 牛光良,王同,翁诗甫,沈德言,徐恒昌,复合树脂中硅烷偶联剂γ—MPS水解与缩合机制的研究,口腔颌面修复学杂志,2002,3(4):208—211
    [53] 李毅强,熊光晶等,硅烷偶联剂溶液改性花岗岩粗骨料混凝土的抗压强度,建筑技术开发,2005,32(8):68—69
    [54] 徐溢,唐守渊,滕毅,张晓凤,金属表面处理用硅烷试剂的水解与缩聚,重庆大学学报,2002,25(10):72—74
    [55] 李毅强,花岗岩/偶联剂/水泥砂浆界面层性能的若干影响因素及其改性机理,汕头大学硕士学位论文,2005
    [56] Ishida H. Structural gradient in the silane coupling agent layers and its influence on the mechanical and physical properties of composites. Molecular characterization of composite interfaces. 1985:25-50
    [57] P. Kumar Mehta, Paulo J. M. Monteiro, Concrete Microstructure, properties, and Materials, 2006, Chapter2
    [58] 王培铭.扫描电镜研究水泥浆体原始断面应注意的问题[J].建筑材料学报,1998,1(2):129—133.
    [59] 朱履冰.表面与界面物理[M].天津:天津大学出版社,1992.124-175.
    [60] 王培铭,许乾慰,材料研究方法科学出版社,2005,
    [61] 廉慧珍,建筑材料物相研究基础,清华大学出版社,1996,
    [62] 李建勇,合成C-S-H凝胶对水泥石—集料界面区的影响,武汉工业大学学报,1997,19(2):9—16
    [63] 何金兰,杨克让,李小戈.仪器分析原理.科学出版社,2002
    [64] 王建祺,吴文辉,冯大明.电子能谱学(XPS/XAES/UPS)引论.国防工业出版社,1992
    [65] 刘世宏,王当憨,潘成璜.X射线光电子能谱分析.科学出版社,1988

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700