基于GPRS的低压配电网监测终端设计
摘要
随着我国进入新型工业化时代,用电需求在不断加大,低压配电网的规模也随之逐年扩大,安全用电就显得尤为重要了。目前,配电线路上负载的多样性大且电气特性复杂,特别是一些大功率非线性电气设备的接入,极易引起线路老化,导致火灾等特大灾害。电网电压的不稳定也会严重干扰精密工控设备的正常运行,由此而造成的经济损失是不可估量的。在这样的状况下,供电部门急需要一套可靠的智能监测系统来管理低压配电网。将GPRS无线通信技术应用于监测数据的传输,可以避免大规模铺设通信线路,实现对配电网的实时监测,从而为企业和居民提供绿色、稳定的电力供应。
本文提出了一种基于GPRS的低压配电网监测终端的设计方案,它由数据采集模块和GPRS无线通信模块组成。数据采集模块负责配电网电能参数的收集、显示、存储和发布。无线通信模块通过RS232串口与采集模块相连,它主要负责将数据发送到后台监测中心。GPRS无线监测方式与传统的有线监测方式相比,有着更多的优点和更好的应用前景。目前相关的监测产品也有,但仍存在一些问题,所以厂家要求我们提出改进措施,以进一步提高产品档次。基于这一点,我们经过全面分析,决定实现配电网监测的三个关键技术(即高精度电能参数采集、自动回复查询短信和GPRS网络无断线连接),从而设计出具有如下优势的智能终端：(1)通过实际电路测量比较后,选用了高精度的CS5463型电能计量芯片来完成数据采集,与同类芯片相比,能精确测量更多的电能参数且具有温度漂移补偿等功能；(2)当GPRS模块收到新短信时,不存入SIM卡,而直接从串口输出至处理单元,完成查询短信的快速读取和自动回复；(3)采用最新软件“心跳包”技术,实现GPRS模块一直在线,避免反复连接网络。
在硬件方面,我们采用STC90C58AD型单片机作为主处理器,它具有4kB的SDRAM,能很好地完成短信收发和GPRS网络连接。监测终端上还包含了显示、存储、时钟日历和按键控制等辅助功能电路。在软件方面,我们重点实现短信的编解码,使用AT指令实现GPRS网络的无断线连接,编写各功能电路的驱动程序。
With our country entering a new era of industrialization, the demand for power consumption continues to increase, the scale of the Low-voltage distribution network is also expanding year by year and the problem of using electricity safely appears especially important. At present, the load of distribution line has different types and their electrical characteristics are complex, especially the nonlinear electrical equipment with high-power which can easily cause the wire to age and bring fire and other serious disasters. Voltage instability will seriously interfere with the normal operation of industrial equipment and the economic loss is incalculable. In such a situation, the power sector needs a reliable intelligent monitoring system to collect data used for the management of the Low-voltage distribution network. The GPRS wireless communication technology is applied to send monitoring data, which can avoid laying communication lines on a large scale and achieve real-time monitor of the network status, so as to provide green, stable power supply for corporations and residents.
This paper gives a new method for the design of Low-voltage distribution network Terminal, which is based on GPRS technology. It is consisted of two parts: data acquisition module and wireless module. The first part is used to collect the power parameters of distribution network for display, storage and distribution. Wireless module connects with gathering module through the RS232 serial port and finally the data is sent to operation center via the GPRS network. Compared with the traditional wired monitoring method, the wireless method has more merits and better application prospect. At present, the related monitoring products have appeared, but there are still lots of problems crying out for solution. In the face of this, the manufacturers require us to make improvements and rise up the quality of the products. Considering this point, we decide to implement three key technologies through our comprehensive analysis, which are used for the management of the distribution network (how to collect the power parameters with high precision, how to reply SMS automatically, how to link the GPRS network without break). In order to solve these problems, we design the intelligent terminal with the following advantages. (1) Based on the actual measurements, we select CS5463 chip with high-precision to collect data. It can get all kinds of power parameters through calculation. Compared with the similar chips, the CS5463 chip can provide more parameters and compensate for the temperature drift. (2) When the GPRS module receives a new short message, it is not stored in the memory of SIM card but output from the serial port directly, so as to read the message without waiting and reply automatically. (3) Making use of the newest technology of heartbeat-packets to keep GPRS module on line all the time and avoid connecting to the network repeatedly.
In the hardware design, we choose STC90C58AD chip as the main processor, which has 4kB SDRAM, can accomplish to process short message and link to the GPRS network. The monitoring terminal also includes auxiliary circuit used for display, memory, clock, calendar and key control. Regarding software design, we mainly achieve the message encoding and decoding, use the AT command to complete the access of GPRS network without break and write the driving program of the functional circuit.
本文提出了一种基于GPRS的低压配电网监测终端的设计方案,它由数据采集模块和GPRS无线通信模块组成。数据采集模块负责配电网电能参数的收集、显示、存储和发布。无线通信模块通过RS232串口与采集模块相连,它主要负责将数据发送到后台监测中心。GPRS无线监测方式与传统的有线监测方式相比,有着更多的优点和更好的应用前景。目前相关的监测产品也有,但仍存在一些问题,所以厂家要求我们提出改进措施,以进一步提高产品档次。基于这一点,我们经过全面分析,决定实现配电网监测的三个关键技术(即高精度电能参数采集、自动回复查询短信和GPRS网络无断线连接),从而设计出具有如下优势的智能终端：(1)通过实际电路测量比较后,选用了高精度的CS5463型电能计量芯片来完成数据采集,与同类芯片相比,能精确测量更多的电能参数且具有温度漂移补偿等功能；(2)当GPRS模块收到新短信时,不存入SIM卡,而直接从串口输出至处理单元,完成查询短信的快速读取和自动回复；(3)采用最新软件“心跳包”技术,实现GPRS模块一直在线,避免反复连接网络。
在硬件方面,我们采用STC90C58AD型单片机作为主处理器,它具有4kB的SDRAM,能很好地完成短信收发和GPRS网络连接。监测终端上还包含了显示、存储、时钟日历和按键控制等辅助功能电路。在软件方面,我们重点实现短信的编解码,使用AT指令实现GPRS网络的无断线连接,编写各功能电路的驱动程序。
With our country entering a new era of industrialization, the demand for power consumption continues to increase, the scale of the Low-voltage distribution network is also expanding year by year and the problem of using electricity safely appears especially important. At present, the load of distribution line has different types and their electrical characteristics are complex, especially the nonlinear electrical equipment with high-power which can easily cause the wire to age and bring fire and other serious disasters. Voltage instability will seriously interfere with the normal operation of industrial equipment and the economic loss is incalculable. In such a situation, the power sector needs a reliable intelligent monitoring system to collect data used for the management of the Low-voltage distribution network. The GPRS wireless communication technology is applied to send monitoring data, which can avoid laying communication lines on a large scale and achieve real-time monitor of the network status, so as to provide green, stable power supply for corporations and residents.
This paper gives a new method for the design of Low-voltage distribution network Terminal, which is based on GPRS technology. It is consisted of two parts: data acquisition module and wireless module. The first part is used to collect the power parameters of distribution network for display, storage and distribution. Wireless module connects with gathering module through the RS232 serial port and finally the data is sent to operation center via the GPRS network. Compared with the traditional wired monitoring method, the wireless method has more merits and better application prospect. At present, the related monitoring products have appeared, but there are still lots of problems crying out for solution. In the face of this, the manufacturers require us to make improvements and rise up the quality of the products. Considering this point, we decide to implement three key technologies through our comprehensive analysis, which are used for the management of the distribution network (how to collect the power parameters with high precision, how to reply SMS automatically, how to link the GPRS network without break). In order to solve these problems, we design the intelligent terminal with the following advantages. (1) Based on the actual measurements, we select CS5463 chip with high-precision to collect data. It can get all kinds of power parameters through calculation. Compared with the similar chips, the CS5463 chip can provide more parameters and compensate for the temperature drift. (2) When the GPRS module receives a new short message, it is not stored in the memory of SIM card but output from the serial port directly, so as to read the message without waiting and reply automatically. (3) Making use of the newest technology of heartbeat-packets to keep GPRS module on line all the time and avoid connecting to the network repeatedly.
In the hardware design, we choose STC90C58AD chip as the main processor, which has 4kB SDRAM, can accomplish to process short message and link to the GPRS network. The monitoring terminal also includes auxiliary circuit used for display, memory, clock, calendar and key control. Regarding software design, we mainly achieve the message encoding and decoding, use the AT command to complete the access of GPRS network without break and write the driving program of the functional circuit.
引文
[1]徐兴星.配电网谐波的危害与防治[J].山西建筑,2009,35(29)：176～177.
[2]赵宝军.电网调度自动化系统的开发应用[J].设备管理,2009,(3)：62～65.
[3]赖建,杨微.低压配电智能管理系统及其效果分析[J].电力系统通信,2009,30(196)：8-11.
[4]李兴源,魏巍.坚强智能电网发展技术的研究[J].电力系统保护与控制,2009,37(17)：1-7.
[5]唐雯,罗安.分层式电能质量在线监测与保护系统[J].计算机测量与控制,2008,16(11)：1542～1544.
[6]杨波.GPRS技术在电力系统中的应用分析[J].电信工程技术与标准化,2010,(1)：71～74.
[7]陶峥.监控与数据采集系统在能源管理中的应用研究[D].重庆大学,2009.
[8]P K Lee, L L Lai. A practical approach to wireless GPRS on-line power quality monitoring system[C].2007 IEEE Power Engineering Society General Meeting, Tampa, United states, 2007:420～423.
[9]Takeuchi, Hironori. The development of remote monitoring system using international standard[C]. World Congress on Medical Physics and Biomedical Engineering, Munich, Germany,2009:330～333.
[10]Luitel, Bipul. Enhanced wide area monitoring system [C]. Innovative Smart Grid Technologies Conference, Gaithersburg, United states,2010:237～240.
[11]Kaicheng Li, Jiafeng Liu. Remote power management and meter-reading system based on ARM microprocessor[C].2008 Conference on Precision Electromagnetic Measurements Digest, Broomfield, United states,2008:216～217.
[12]高民.用户电能质量监测技术研究[D].华北电力大学,2008.
[13]程显蒙.基于GPRS的远程电压监测系统研究与设计[D].西安理工大学,2008.
[14]冯俊青.基于GPRS的电网参数远程监测系统的研究与设计[D].江苏大学,2009.
[15]Yang Musheng, Zhang Yu. Study on wireless remote monitoring system based on GPRS[C]. 2008 International Conference on Wireless Communications, Networking and Mobile Computing, Dalian, China,2008:120～123.
[16]Chen Yu, Zhang Haijun. Research and design of high-voltage electronic power equipment monitor system based on wireless communication technology[C].2009 Asia-Pacific Power and Energy Engineering Conference, Wuhan, China,2009:220～222.
[17]刘维梁.嵌入式系统设计模式的研究分析[D].天津大学,2007.
[18]张洪彬,柳吉龄.一种高速数据采集系统的实现[J].中国测试技术,2007,33(1)：125～127.
[19]姜达.一种UART串行端口的中断控制方法研究[J].声学与电子工程,2008,(3)：41～43.
[20]魏丽,赵晨光.基于嵌入式系统的设备状态监测装置的硬件开发[J].机械设计与制造, 2009, (3):220～222.
[21]宋晓锋.12C总线原理及应用[J].科技浪潮,2007,9(60)：25～26.
[22]戴立新,王泽勇.12C总线接口的设计及验证[J].总线与网络,2009,(2)：132～134.
[23]孙军亮.基于GPRS的电网远程监控与调度系统的研制[D].西安科技大学,2009.
[24]梁德坚,刘玉琼.SPI总线数据远距离传输实现[J].电子测试,2009,(1)：72～75.
[25]Asaduzzaman, Abu. Evaluation of I-Cache locking technique for real-time embedded systems[C].4th International Conference on Innovations in Information Technology, Dubai, United arab emirates,2008:342～346.
[26]张杰,胡世安.基于GPRS的无线数据传输系统及其应用探讨[J].电子测量与仪器学报,2009,30(5)：154～157.
[27]Habeeb, Ahmad Ali. Voice communication over GGSN/SGSN[C].11th International Conference on Advanced Communication Technology, Phoenix Park, Korea,2009:682～687.
[28]李敏,黄运生.基于GPRS的无线电力监控系统的设计与实现[J].通信与信息处理,2010,29(4)：48～50.
[29]楼秀群,高美凤.基于GPRS无线数据采集和传输终端的设计[J].科学技术与工程,2008,8(11)：2981～2984.
[30]黄志平,唐亚纯.Keil μVision 4在C8051F321仿真调试中的应用[J].电脑知识与技术,2009,5(36)：308～309.
[31]徐冉,高随祥.无线传感器网络的可靠性计算[J].计算机应用研究,2009,26(3)：987～990.
[32]孙同景.Freescale 9S12十六位单片机原理及嵌入式开发技术[M].北京：机械工业出版社,2008.
[33]张浩然.X5045电路及其应用[J].集成电路通信,2006,24(4)：15～19.
[34]王志功,陈莹梅.集成电路设计[M].北京：电子工业出版社,2009.
[35]刘雨兰,吕虹.80C196KB的串行接口设计在锅炉控制系统中的应用[J].经验交流,2007,26(1)：122～124.
[36]苗璐,刘沛,苗世洪.串行时钟PCF8583在微机保护装置中的应用[J].电子设计工程,2009,17(6)：96～98.
[37]潘大伟,黄璞.基于12864 LCD的波形显示系统的研制[J].仪器仪表用户,2008,(3)：28～29.
[38]陈志武,丁莉芬,冯建勤.基于CS5463的电力参数综合监测仪表的研制[J].中国农村水利水电,2010,(4)：146～148.
[39]刘燕,黄晓革.键盘扩展设备ZLG7290在Linux系统中的驱动设计[J].科技创新导报,2008,(2)：16～17.
[40]晏勇.现代电子系统中电源技术的发展和应用[J].单片机与嵌入式系统应用,2009,(11)：12～14.
[41]徐橼.无线监控系统中GPRS数据终端的研究与实现[D].西华大学,2008.
[42]Sedigh Harms. Wireless network and embedded system for autonomous real-time SHM [C]. 4th European Workshop on Structural Health Monitoring, Cracow, Poland,2008:614～621.
[43]肖广兵,唐慧强.基于TC35i的无线数据采集系统的设计[J].通信技术,2009,42(4)：189～191.
[44]曹诗兵.蓄电池监控系统的设计和实现[D].天津大学,2007.
[45]闫云利,原思聪.基于VC实现PC机控制手机SMS的发送[J].电子器件,2009,32(1)：141-143.
[46]晏强.GPRS技术在电压质量监测中的应用[J].新疆电力技术,2008,(4)：19～20.
[47]Lamparth, Fuhrhop. A Mobile Device for Textile-integrated Long-term ECG Monitoring [C]. World Congress on Medical Physics and Biomedical Engineering, Munich, Germany,2009: 278～281.
[48]Seippel, Dietolf. Single chip cellular radios for GSM, GPRS, EDGE[C].2007 IEEE Radio Frequency Integrated Circuits Symposium, Honolulu, United states,2007：9～12.
[49]丁青锋,林知明.基于Visual C++的MMS PDU编解码系统设计[J].微计算机信息,2009,(4)：289～291.
[50]陆斌,杨北革.基于GPRS传输的新型输电线路红外热像检测系统[J].工业控制计算机,2009,(5)：22～23.
[51]陈来杰.三相电网参数测量系统及其DSP实现[D].西安电子科技大学,2007.
[52]孙正来,孙鸣.高压开关柜温度在线监测技术研究[J].电力信息化,2008,6(6)：62～66.
[53]郭中宁,孙文俊.电子信息系统中信息传输控制技术[J].计算机工程,2009,35(1)：114～119.
[54]冀本豪.海洋环境监测数据采集器研制及其数据处理方法设计[D].中国石油大学,2009.
[55]王震亚,刘和山.谈人机交互原理在产品设计中的应用[J].工程图学学报,2009,(2)：126～129.
[56]石彦辉,高蒙,甘朝辉.PCF8583在智能电能管理系统中的应用[J].无线电工程,2007,(7)：52～54.
[57]王波.基于低压电力线的智能载波通信模块的研究与设计[D].哈尔滨工业大学,2008.
[2]赵宝军.电网调度自动化系统的开发应用[J].设备管理,2009,(3)：62～65.
[3]赖建,杨微.低压配电智能管理系统及其效果分析[J].电力系统通信,2009,30(196)：8-11.
[4]李兴源,魏巍.坚强智能电网发展技术的研究[J].电力系统保护与控制,2009,37(17)：1-7.
[5]唐雯,罗安.分层式电能质量在线监测与保护系统[J].计算机测量与控制,2008,16(11)：1542～1544.
[6]杨波.GPRS技术在电力系统中的应用分析[J].电信工程技术与标准化,2010,(1)：71～74.
[7]陶峥.监控与数据采集系统在能源管理中的应用研究[D].重庆大学,2009.
[8]P K Lee, L L Lai. A practical approach to wireless GPRS on-line power quality monitoring system[C].2007 IEEE Power Engineering Society General Meeting, Tampa, United states, 2007:420～423.
[9]Takeuchi, Hironori. The development of remote monitoring system using international standard[C]. World Congress on Medical Physics and Biomedical Engineering, Munich, Germany,2009:330～333.
[10]Luitel, Bipul. Enhanced wide area monitoring system [C]. Innovative Smart Grid Technologies Conference, Gaithersburg, United states,2010:237～240.
[11]Kaicheng Li, Jiafeng Liu. Remote power management and meter-reading system based on ARM microprocessor[C].2008 Conference on Precision Electromagnetic Measurements Digest, Broomfield, United states,2008:216～217.
[12]高民.用户电能质量监测技术研究[D].华北电力大学,2008.
[13]程显蒙.基于GPRS的远程电压监测系统研究与设计[D].西安理工大学,2008.
[14]冯俊青.基于GPRS的电网参数远程监测系统的研究与设计[D].江苏大学,2009.
[15]Yang Musheng, Zhang Yu. Study on wireless remote monitoring system based on GPRS[C]. 2008 International Conference on Wireless Communications, Networking and Mobile Computing, Dalian, China,2008:120～123.
[16]Chen Yu, Zhang Haijun. Research and design of high-voltage electronic power equipment monitor system based on wireless communication technology[C].2009 Asia-Pacific Power and Energy Engineering Conference, Wuhan, China,2009:220～222.
[17]刘维梁.嵌入式系统设计模式的研究分析[D].天津大学,2007.
[18]张洪彬,柳吉龄.一种高速数据采集系统的实现[J].中国测试技术,2007,33(1)：125～127.
[19]姜达.一种UART串行端口的中断控制方法研究[J].声学与电子工程,2008,(3)：41～43.
[20]魏丽,赵晨光.基于嵌入式系统的设备状态监测装置的硬件开发[J].机械设计与制造, 2009, (3):220～222.
[21]宋晓锋.12C总线原理及应用[J].科技浪潮,2007,9(60)：25～26.
[22]戴立新,王泽勇.12C总线接口的设计及验证[J].总线与网络,2009,(2)：132～134.
[23]孙军亮.基于GPRS的电网远程监控与调度系统的研制[D].西安科技大学,2009.
[24]梁德坚,刘玉琼.SPI总线数据远距离传输实现[J].电子测试,2009,(1)：72～75.
[25]Asaduzzaman, Abu. Evaluation of I-Cache locking technique for real-time embedded systems[C].4th International Conference on Innovations in Information Technology, Dubai, United arab emirates,2008:342～346.
[26]张杰,胡世安.基于GPRS的无线数据传输系统及其应用探讨[J].电子测量与仪器学报,2009,30(5)：154～157.
[27]Habeeb, Ahmad Ali. Voice communication over GGSN/SGSN[C].11th International Conference on Advanced Communication Technology, Phoenix Park, Korea,2009:682～687.
[28]李敏,黄运生.基于GPRS的无线电力监控系统的设计与实现[J].通信与信息处理,2010,29(4)：48～50.
[29]楼秀群,高美凤.基于GPRS无线数据采集和传输终端的设计[J].科学技术与工程,2008,8(11)：2981～2984.
[30]黄志平,唐亚纯.Keil μVision 4在C8051F321仿真调试中的应用[J].电脑知识与技术,2009,5(36)：308～309.
[31]徐冉,高随祥.无线传感器网络的可靠性计算[J].计算机应用研究,2009,26(3)：987～990.
[32]孙同景.Freescale 9S12十六位单片机原理及嵌入式开发技术[M].北京：机械工业出版社,2008.
[33]张浩然.X5045电路及其应用[J].集成电路通信,2006,24(4)：15～19.
[34]王志功,陈莹梅.集成电路设计[M].北京：电子工业出版社,2009.
[35]刘雨兰,吕虹.80C196KB的串行接口设计在锅炉控制系统中的应用[J].经验交流,2007,26(1)：122～124.
[36]苗璐,刘沛,苗世洪.串行时钟PCF8583在微机保护装置中的应用[J].电子设计工程,2009,17(6)：96～98.
[37]潘大伟,黄璞.基于12864 LCD的波形显示系统的研制[J].仪器仪表用户,2008,(3)：28～29.
[38]陈志武,丁莉芬,冯建勤.基于CS5463的电力参数综合监测仪表的研制[J].中国农村水利水电,2010,(4)：146～148.
[39]刘燕,黄晓革.键盘扩展设备ZLG7290在Linux系统中的驱动设计[J].科技创新导报,2008,(2)：16～17.
[40]晏勇.现代电子系统中电源技术的发展和应用[J].单片机与嵌入式系统应用,2009,(11)：12～14.
[41]徐橼.无线监控系统中GPRS数据终端的研究与实现[D].西华大学,2008.
[42]Sedigh Harms. Wireless network and embedded system for autonomous real-time SHM [C]. 4th European Workshop on Structural Health Monitoring, Cracow, Poland,2008:614～621.
[43]肖广兵,唐慧强.基于TC35i的无线数据采集系统的设计[J].通信技术,2009,42(4)：189～191.
[44]曹诗兵.蓄电池监控系统的设计和实现[D].天津大学,2007.
[45]闫云利,原思聪.基于VC实现PC机控制手机SMS的发送[J].电子器件,2009,32(1)：141-143.
[46]晏强.GPRS技术在电压质量监测中的应用[J].新疆电力技术,2008,(4)：19～20.
[47]Lamparth, Fuhrhop. A Mobile Device for Textile-integrated Long-term ECG Monitoring [C]. World Congress on Medical Physics and Biomedical Engineering, Munich, Germany,2009: 278～281.
[48]Seippel, Dietolf. Single chip cellular radios for GSM, GPRS, EDGE[C].2007 IEEE Radio Frequency Integrated Circuits Symposium, Honolulu, United states,2007：9～12.
[49]丁青锋,林知明.基于Visual C++的MMS PDU编解码系统设计[J].微计算机信息,2009,(4)：289～291.
[50]陆斌,杨北革.基于GPRS传输的新型输电线路红外热像检测系统[J].工业控制计算机,2009,(5)：22～23.
[51]陈来杰.三相电网参数测量系统及其DSP实现[D].西安电子科技大学,2007.
[52]孙正来,孙鸣.高压开关柜温度在线监测技术研究[J].电力信息化,2008,6(6)：62～66.
[53]郭中宁,孙文俊.电子信息系统中信息传输控制技术[J].计算机工程,2009,35(1)：114～119.
[54]冀本豪.海洋环境监测数据采集器研制及其数据处理方法设计[D].中国石油大学,2009.
[55]王震亚,刘和山.谈人机交互原理在产品设计中的应用[J].工程图学学报,2009,(2)：126～129.
[56]石彦辉,高蒙,甘朝辉.PCF8583在智能电能管理系统中的应用[J].无线电工程,2007,(7)：52～54.
[57]王波.基于低压电力线的智能载波通信模块的研究与设计[D].哈尔滨工业大学,2008.