不同磨光方法对弹性义齿基托表面粗糙度影响的实验研究
摘要
目的:研究不同磨光处理对弹性义齿基托表面粗糙度的影响,为临床选择合适的磨光方法提供参考。
方法:常规制作弹性基托试件90个,随机分为三组,分别采用硅橡胶磨头(1#-3#),金刚砂磨头(001#,002#),砂纸卷(500目,1000目,1500目)粗磨,采用布轮沾水,布轮沾抛光蜡,布轮沾抛光蜡和亮托抛光浆细磨抛光,利用表面粗糙度检查仪测定其粗糙度,扫描电镜观察磨光后的表面形貌,然后对检测结果进行统计学分析。
结果:
1、表面粗糙度检查仪检测:不同粗磨方法样本组的表面粗糙度(Ra值)的平均值比较:砂纸组<硅橡胶磨头组<金刚砂组,统计学上存在显著性差异(p<0.001);各组抛光方法表面粗糙度(Ra值)的平均值比较:布轮沾抛光膏和亮托抛光浆组<布轮沾抛光膏组<布轮沾水组,统计学上存在显著性差异(p<0.001)。
2、扫描电镜观察:经金刚砂粗磨,试件表面粗糙,划痕较多,较深;经硅橡胶磨头粗磨,试件表面较光滑,划痕较浅;经1500目砂纸粗磨,试件表面最光滑,划痕最浅。经布轮沾水抛光,试件表面粗糙,划痕较多,较深;经布轮沾抛光蜡抛光,试件表面较光滑,划痕较浅;经布轮沾抛光蜡和亮托抛光浆抛光,试件表面最平滑。
结论:
1.经砂纸;硅橡胶磨头;金刚砂处理弹性义齿试件,获得不同的表面粗糙度,经1500目砂纸和硅橡胶磨头处理的试件表面平滑。
2.经布轮沾抛光蜡,布轮沾亮托抛光浆抛光弹性义齿试件表面,表面粗糙度得到显著降低,试件表面平滑。
3.弹性义齿试件不同的粗磨和抛光方法之间存在交互作用,经1500目砂纸粗磨和布轮沾抛光蜡和亮托抛光浆处理后,可以获得较低的粗糙度值,试件表面最平滑。
Objectives: To evaluate effects of different polishing methods on flexible denture base. some evidence can be provided to choose the fitting polishing method for clinic work .
Methods: 90 specimens were randomly divided into 3 groups. Polishing casts are finished with silicon gel wheel ,silicon trimming stone and sand paper roll and polished by cloth wheel with water, polishing wax or polishing brei respectively Surface roughness (Ravalue) of each casting was measured with a profilometre, and observation was made through scanning electron microscope .Data were statistically analyzed .
Results: Though three ways of coarse grinding and smooth grinding , there was statistical significant difference (P<0.05) in the surface roughness of group silicon gel wheel, silicon trimming stone and sand paper roll.
Observation by scanning electron microscope: Surface roughness of specimens finished through silicon gel wheel ,silicon trimming stone or paper roll were different . there were more cratch on the surface of specimens finished by silicon trimming stone, and the cratch were deeper in group of silicon gel wheel, there were less cratch which were more thinner. the most smoothest surface was obtained in group of sand paper roll polished by cloth wheel with polishing wax and polishing brei .
Conclusions: The roughness of flexible denture base was influenced by statistical and mathematical technicians Coarse grinding with sand paper roll ,smooth grinding with polishing wax and polishing brei achieve the smoothest surface which can be available in clinic.
方法:常规制作弹性基托试件90个,随机分为三组,分别采用硅橡胶磨头(1#-3#),金刚砂磨头(001#,002#),砂纸卷(500目,1000目,1500目)粗磨,采用布轮沾水,布轮沾抛光蜡,布轮沾抛光蜡和亮托抛光浆细磨抛光,利用表面粗糙度检查仪测定其粗糙度,扫描电镜观察磨光后的表面形貌,然后对检测结果进行统计学分析。
结果:
1、表面粗糙度检查仪检测:不同粗磨方法样本组的表面粗糙度(Ra值)的平均值比较:砂纸组<硅橡胶磨头组<金刚砂组,统计学上存在显著性差异(p<0.001);各组抛光方法表面粗糙度(Ra值)的平均值比较:布轮沾抛光膏和亮托抛光浆组<布轮沾抛光膏组<布轮沾水组,统计学上存在显著性差异(p<0.001)。
2、扫描电镜观察:经金刚砂粗磨,试件表面粗糙,划痕较多,较深;经硅橡胶磨头粗磨,试件表面较光滑,划痕较浅;经1500目砂纸粗磨,试件表面最光滑,划痕最浅。经布轮沾水抛光,试件表面粗糙,划痕较多,较深;经布轮沾抛光蜡抛光,试件表面较光滑,划痕较浅;经布轮沾抛光蜡和亮托抛光浆抛光,试件表面最平滑。
结论:
1.经砂纸;硅橡胶磨头;金刚砂处理弹性义齿试件,获得不同的表面粗糙度,经1500目砂纸和硅橡胶磨头处理的试件表面平滑。
2.经布轮沾抛光蜡,布轮沾亮托抛光浆抛光弹性义齿试件表面,表面粗糙度得到显著降低,试件表面平滑。
3.弹性义齿试件不同的粗磨和抛光方法之间存在交互作用,经1500目砂纸粗磨和布轮沾抛光蜡和亮托抛光浆处理后,可以获得较低的粗糙度值,试件表面最平滑。
Objectives: To evaluate effects of different polishing methods on flexible denture base. some evidence can be provided to choose the fitting polishing method for clinic work .
Methods: 90 specimens were randomly divided into 3 groups. Polishing casts are finished with silicon gel wheel ,silicon trimming stone and sand paper roll and polished by cloth wheel with water, polishing wax or polishing brei respectively Surface roughness (Ravalue) of each casting was measured with a profilometre, and observation was made through scanning electron microscope .Data were statistically analyzed .
Results: Though three ways of coarse grinding and smooth grinding , there was statistical significant difference (P<0.05) in the surface roughness of group silicon gel wheel, silicon trimming stone and sand paper roll.
Observation by scanning electron microscope: Surface roughness of specimens finished through silicon gel wheel ,silicon trimming stone or paper roll were different . there were more cratch on the surface of specimens finished by silicon trimming stone, and the cratch were deeper in group of silicon gel wheel, there were less cratch which were more thinner. the most smoothest surface was obtained in group of sand paper roll polished by cloth wheel with polishing wax and polishing brei .
Conclusions: The roughness of flexible denture base was influenced by statistical and mathematical technicians Coarse grinding with sand paper roll ,smooth grinding with polishing wax and polishing brei achieve the smoothest surface which can be available in clinic.
引文
1.PhoenixR D.D entureB aseM aterials.D entalC linicsof NorthAmerica,19 96,40(1):113-120
2.徐恒昌主编.口腔材料学,北京:北京大学医学出版社,2005:52-53
3.陈治清主编.口腔生物材料学·北京:化学工业出版社,2004:8
4.孙剑,杨宏军,朱群.可摘义齿基托材料与义齿性口炎的关系[J].海军医学杂志,2002,23(4):323-325.
5.余占海,刘斌,曹秀玲.RPDs对口腔微生态系影响的研究进展[J].广东牙病防治, 1995,3(4):59-61.
6.杨向东,杨家瑞,刘景臣.义齿性口炎的临床分析[J].白求恩医科大学学报, 1998,24(5):532-533.
7.刘强,刘清辉,卢华芳等.弹性义齿基托表面粗糙度与细菌粘附的实验研究[J].实用医学杂志,2005,21(22):2477-2478
8.白天玺,张庆华.念珠菌与义齿性口炎[J].现代口腔念珠菌病学,1995,10:160-173
9.Shulman JD,Rivera-Hidalgo F,Beach MM.Risk factors associated with denturestomatitis in the United States[J].J Oral PatholMed,2005,34(6):340-346.
10.Chandra J,Patel JD,LiJ,et al.Modification of surface proper ties of Biomaterial Influences the ability of Candida albicans to form biofilms[J].Appl Environ Microbiol, 2005,71(12):8795-8801
11.杨家瑞.义齿性口炎患者腭粘膜微生物丛及义齿菌斑的真菌学研究[J].口腔医学纵横杂志, 1998,14(2):110-112.
12.Edgerton M.Characterization of acquired denture pellicle from healthy and stomatitis patients[J]. J,1992,68(4):683.
13.高宁,柴枫,刘国秋,等.口腔修复材料表面粗糙度与血链球菌早期粘附的关系[J].华西医大学报,1998;29(2):147-150.
14.王贻宁,温国江,施斌,等.牙科陶瓷表面粗糙度与细菌粘附的实验研究[J].中华口腔医学杂志, 2003,38(5):342-344.
15.Quirynen M,Bollen CM.The influence of surface roughness and surface free energy on supra and subgingival plaque formation in man.A review of the literature [J].J Clin Periodontol,1995, 22(1):1-14.
16.Oksala E.Factors predisposing to oral yeast infections[J].Acta Odont Scand,1990,48:71.
17.Quirynen M,Marechal M,Busscher HJ,et al.The influence of surface free energy and surface roughness on early plaque formation.Anin vivo study in man [J].J Clin Periodontol,1990, 17(3):138-144.
18.陈冶清主编.口腔材料学[M],第四版.北京:人民卫生出版社,2008:60-61.
19.丁双英,孔凡芝,佘鹏,等.铸造支架与弹性树脂结合修复多数牙缺失的临床美学效果[J].中国美容医学,2006,15(10):1183-1184.
20.Arda T,Arikan A.An in vitro comparison of retentive force and deformation of acetal resin and cobalt-chromium clasps [J].J Prosthet Dent,2005,94(3):267-274.
21.Zitzmann NU,Rohner U,Weiger R,et al.When to choose which retention element to use for removable dental prostheses [J].Int J Prosthodont,2009,22(2):161-167.
22.胡晓萍,胡飘萍,朱洪水.树脂卡环固位力和形变的体外研究[J].华西口腔医学杂志,2009,27(4):422-424.
23.韦佩玲,钟志海,余艳崧,等.隐形卡环联合固位式铸造可摘局部义齿的疗效观察[J].中国美容医学,2010,19(9):1371-1373.
24.李笑梅.口腔修复材料的表面粗糙度及表面自由能对微生物粘附的影响[J].第二军医大学报,2001,22(5):487-489.
25.Verran J,Maryan CJ.Retention of Candida albicans on acrylic resin and silicone of different surface topography[J].J Prosthet Dent,1997,77:535-539.
26.姜明德,黄芝慧.公差配合与技术测量[M].湖南:湖南科学技术出版社,1985:103-114.
27.文学军,王小祥.金属生物材料的微粗糙表面及其生物学效应(Ⅰ)—金属生物材料的微粗糙表面.生物医学工程学杂志,1997;14(1)∶77.
28.Al-Shammery HAO,Bubb NL,Youngson CC,et al.The use of confocal microscopy to assess surface roughness of two milled CAD-CAM ceramics following two polishing techniques[J]. Dent Mater,2006,21:985-990.
29.吴景轮主编.口腔修复实用技术[M].济南:山东科学技术出版社,2000:134-136.
30.Bollen CM,Lambrechts P,Quirynen M.Comparison of surface roughness of oral hard materials to the threshold surface for bacterial plaque retention:a review of the literature[J].Dent Mater,1997, 13:258-269.
1.白天玺,张庆华.念珠菌与义齿性口炎[J].现代口腔念珠菌病学,1995,10:160-173
2.张富强口腔修复基础与临床[M].上海:上海科学技术文献出版社,2004:74-79.
3.Quirynen M,Bollen CML.The influence of suiface roughness and sur face-free energy on supra and subgingival plaque formation in men.(review).J Clin Periodontol,1995,22:1-14.
4.Takahashi Y, Imazato S, Russell RR, et al. Influence of resin monomers on growth of oral streptococci [J]. J Dent Res, 2004, 83(4): 302- 306.
5.Ramage G, Tomsett K, Wickes BL, et al. Denture stomatitis:a role for Candida biofilms[J]. Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 2004, 98(1): 53- 59.
6.QuirynenM,MarechalM,Busscher HJ,et al.The influence of surface free energy and surface roughness on early plaque formation.Anin vivo study in man [J].J Clin Periodontol,1990, 17(3):1382144.
7.王萍.义齿性口炎的研究[J].国外医学口腔医学分册,1999,26(5):275-277.
8.杨家瑞.义齿性口炎患者腭粘膜微生物丛及义齿菌斑的真菌学研究[J].口腔医学纵横杂志,1998,14(2):110-112.
9.Edgerton M.Characterization of acquired denture pellicle from healthy and stomatitis patients[J].J,1992,68(4):683.
10.余占海,刘斌,周益民.口腔修复学理论与实践[M].北京:军事医学科学出版社,2004:97-107.
11.李笑梅.口腔修复材料的表面粗糙度及表面自由能对微生物粘附的影响[J].第二军医大学报, 2001,22(5):487-489.
12.Jagger DC,Harrison A.Denture cleaning the best approach [J].Br Dent J,1995,178(11):413-417.
13.余占海,刘斌,曹秀玲.RPDs对口腔微生态系影响的研究进展[J].广东牙病防治, 1995, 3(4):59-61.
14.杨向东,杨家瑞,刘景臣.义齿性口炎的临床分析[J].白求恩医科大学学报,1998,24(5):532-533.
15.Walker DM,Stafford DD, Huggdtt R,et al.The treatment of denture induce stomatitis[J].Br Dent,1981,151:416.
16.潘新华,汤国荣,李健.可摘义齿戴用时间和清洗方法与义齿性口炎的关系[J].临床口腔医学杂志,2000,16(3):170.
17.孙剑,杨宏军,朱群.可摘义齿基托材料与义齿性口炎的关系[J].海军医学杂志,2002,23(4):323-325.
18.Yamauchi M,Yamamoto K,Wakabayashi M,et al.In vitro adherence of micro organisms to denture base resin with different surface texture[J].Dent Mater J ,1990,9(1):19-24.
19.王珏,刘莉.两种树脂基托细菌粘附情况的比较[J].上海生物医学工程,2007,28(1):28-30.
20.何惠宇,朱明,阿达莱提等.金属基托承托区与非承托区口腔粘膜菌丛比较[J].新疆医科大学学报, 2003,226(1):54-55
21.刘广顺,陈树国,孟令强.义齿性口炎的病因及防治[J].中华老年口腔医学杂志,2007年, 5(3):177-179.
22.Yeung AL,Lo E C,Chow TW,et al.Oral health status of patients 5-6years after placement of Cobalt-chromium removable partial dentures[J].Oral Rehabil,2007,27(3):183-189.
23.Kawai K,UranoM,Ebisu S.Effect of surface roughness of porcelain on adhesion of bacteria and their synthesizing glucans[J].J Prosthet Dent,2000,83(6):664-667.
24.李笑梅,郭天文,周中华,等.表面粗糙度对铸造钛表面细菌粘附影响的临床研究[J].中华口腔医学杂志,2001,36(4):289-291.
25.郭吕华,魏娟,孙德文,等.纯钛铸造可摘义齿的临床应用[J].广东牙病防治,2004,12(3):187-189.
26.林江红,王莹,林晓静,等.钛合金铸造基托义齿在修复中的效果观察[J].实用医学杂志, 2008,24(12):2125-2127.
27.Chow CK,MatearDW,Lawrence HP,et al.Efficacy of antifungal agents in tissue conditioners in treating candidiasis[J].Gerodontology,1999,16(2):110-118.
28.陶人川,邓华颉,黄光武,等.伊曲康唑增强义齿软衬材料抗菌性的研究[J].临床口腔医学杂志, 2005,21(10):597-599.
29.董滢,尹路.纳米银应用于软衬材料的抗菌性实验研究[J].山西医科大学学报, 2006,37(8):860-862.
30.尹路,郭天文,王辉,等.纯钛镀制类金刚石薄膜的真菌粘附与细胞毒性研究[J].稀有金属材料与工程,2008,37(1):629.
31.赵兴科,王中.抛光技术的现状,表面技术.2000,29(2):6-7.
32.李伟力,刘鼎新.光固化复合树脂表面抛光的研究.现代口腔医学杂志.2002,16(5):416-417.
33.徐君伍,袁井圻,王忠义.口腔修复学.第1版.人民军医出版社.2002,449.
34.Lothar Borchers,Frank Tavassol,Harald Tschernitschek.Surface quality achieved by polishing and by varnishing of temporary crown and fixed partial denture resins.J Prosthet Dent.1999, 82:550-556.
35.Turkun LS,Turkun M.The effect of one-step polishing system on the surface roughness of three esthetic resin composite materials.Oper Dent.2004,29(2):203-211.
36.Choi MS,Lee YK,Lim BS,Rhee SH,Yang HC.Changes in surface characteristics of dental resin composites after polishing.Mater Sci Mater Med.2005,16(4):347-353.
37.Baseren M.Surface roughness of nanofill and nanohybrid composite resin and ormocer-based tooth-colored restorative materials after several finishing and polishing procedures.J Biomater Appl.2004,19(2):121-134.
38.任煜光,罔耀皓.复合树脂的修形磨光.口腔医学.1989,9(3):133-135.
39.K.Jung.Preparation of smooth and nanocrystalline diamond films.Diamond and Related Materials.1993,31(2):449-453.
40.Deniz Sen,The effect of two polishing pastes on the surface roughness of bis-acryl composite and methacrylate-based resins. J Prosthet Dent.2002,88:527-533.
41.H Nagem Filho.Surface Roughness of Composite Resins After Finishing and Polishing.Braz Dent J.2003,14(1):37-41.
42.Bouvier D,Drupez IP,Lissac M.Comparative evaluation of polishing systems on the surface of three aesthetic materials.J Oral Rehabil.1997,24:888-894.
43.G.Theuniers,M.De Clercq.Finishing procedures for the preparation of crown margins.The Journal of Prosthetic Dentistry.1987,58(5):545-552.
44.Lutz F,etal,J Am Dent Assoc.Quirynen M.The clinical meaning of the surface roughness and surface free energy of intra-oral hard substrate on the microbiology of the supra-and subgingival plaque:result of in vitro and in vivo experiment.J Dent,1994,22(1):513-516.
2.徐恒昌主编.口腔材料学,北京:北京大学医学出版社,2005:52-53
3.陈治清主编.口腔生物材料学·北京:化学工业出版社,2004:8
4.孙剑,杨宏军,朱群.可摘义齿基托材料与义齿性口炎的关系[J].海军医学杂志,2002,23(4):323-325.
5.余占海,刘斌,曹秀玲.RPDs对口腔微生态系影响的研究进展[J].广东牙病防治, 1995,3(4):59-61.
6.杨向东,杨家瑞,刘景臣.义齿性口炎的临床分析[J].白求恩医科大学学报, 1998,24(5):532-533.
7.刘强,刘清辉,卢华芳等.弹性义齿基托表面粗糙度与细菌粘附的实验研究[J].实用医学杂志,2005,21(22):2477-2478
8.白天玺,张庆华.念珠菌与义齿性口炎[J].现代口腔念珠菌病学,1995,10:160-173
9.Shulman JD,Rivera-Hidalgo F,Beach MM.Risk factors associated with denturestomatitis in the United States[J].J Oral PatholMed,2005,34(6):340-346.
10.Chandra J,Patel JD,LiJ,et al.Modification of surface proper ties of Biomaterial Influences the ability of Candida albicans to form biofilms[J].Appl Environ Microbiol, 2005,71(12):8795-8801
11.杨家瑞.义齿性口炎患者腭粘膜微生物丛及义齿菌斑的真菌学研究[J].口腔医学纵横杂志, 1998,14(2):110-112.
12.Edgerton M.Characterization of acquired denture pellicle from healthy and stomatitis patients[J]. J,1992,68(4):683.
13.高宁,柴枫,刘国秋,等.口腔修复材料表面粗糙度与血链球菌早期粘附的关系[J].华西医大学报,1998;29(2):147-150.
14.王贻宁,温国江,施斌,等.牙科陶瓷表面粗糙度与细菌粘附的实验研究[J].中华口腔医学杂志, 2003,38(5):342-344.
15.Quirynen M,Bollen CM.The influence of surface roughness and surface free energy on supra and subgingival plaque formation in man.A review of the literature [J].J Clin Periodontol,1995, 22(1):1-14.
16.Oksala E.Factors predisposing to oral yeast infections[J].Acta Odont Scand,1990,48:71.
17.Quirynen M,Marechal M,Busscher HJ,et al.The influence of surface free energy and surface roughness on early plaque formation.Anin vivo study in man [J].J Clin Periodontol,1990, 17(3):138-144.
18.陈冶清主编.口腔材料学[M],第四版.北京:人民卫生出版社,2008:60-61.
19.丁双英,孔凡芝,佘鹏,等.铸造支架与弹性树脂结合修复多数牙缺失的临床美学效果[J].中国美容医学,2006,15(10):1183-1184.
20.Arda T,Arikan A.An in vitro comparison of retentive force and deformation of acetal resin and cobalt-chromium clasps [J].J Prosthet Dent,2005,94(3):267-274.
21.Zitzmann NU,Rohner U,Weiger R,et al.When to choose which retention element to use for removable dental prostheses [J].Int J Prosthodont,2009,22(2):161-167.
22.胡晓萍,胡飘萍,朱洪水.树脂卡环固位力和形变的体外研究[J].华西口腔医学杂志,2009,27(4):422-424.
23.韦佩玲,钟志海,余艳崧,等.隐形卡环联合固位式铸造可摘局部义齿的疗效观察[J].中国美容医学,2010,19(9):1371-1373.
24.李笑梅.口腔修复材料的表面粗糙度及表面自由能对微生物粘附的影响[J].第二军医大学报,2001,22(5):487-489.
25.Verran J,Maryan CJ.Retention of Candida albicans on acrylic resin and silicone of different surface topography[J].J Prosthet Dent,1997,77:535-539.
26.姜明德,黄芝慧.公差配合与技术测量[M].湖南:湖南科学技术出版社,1985:103-114.
27.文学军,王小祥.金属生物材料的微粗糙表面及其生物学效应(Ⅰ)—金属生物材料的微粗糙表面.生物医学工程学杂志,1997;14(1)∶77.
28.Al-Shammery HAO,Bubb NL,Youngson CC,et al.The use of confocal microscopy to assess surface roughness of two milled CAD-CAM ceramics following two polishing techniques[J]. Dent Mater,2006,21:985-990.
29.吴景轮主编.口腔修复实用技术[M].济南:山东科学技术出版社,2000:134-136.
30.Bollen CM,Lambrechts P,Quirynen M.Comparison of surface roughness of oral hard materials to the threshold surface for bacterial plaque retention:a review of the literature[J].Dent Mater,1997, 13:258-269.
1.白天玺,张庆华.念珠菌与义齿性口炎[J].现代口腔念珠菌病学,1995,10:160-173
2.张富强口腔修复基础与临床[M].上海:上海科学技术文献出版社,2004:74-79.
3.Quirynen M,Bollen CML.The influence of suiface roughness and sur face-free energy on supra and subgingival plaque formation in men.(review).J Clin Periodontol,1995,22:1-14.
4.Takahashi Y, Imazato S, Russell RR, et al. Influence of resin monomers on growth of oral streptococci [J]. J Dent Res, 2004, 83(4): 302- 306.
5.Ramage G, Tomsett K, Wickes BL, et al. Denture stomatitis:a role for Candida biofilms[J]. Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 2004, 98(1): 53- 59.
6.QuirynenM,MarechalM,Busscher HJ,et al.The influence of surface free energy and surface roughness on early plaque formation.Anin vivo study in man [J].J Clin Periodontol,1990, 17(3):1382144.
7.王萍.义齿性口炎的研究[J].国外医学口腔医学分册,1999,26(5):275-277.
8.杨家瑞.义齿性口炎患者腭粘膜微生物丛及义齿菌斑的真菌学研究[J].口腔医学纵横杂志,1998,14(2):110-112.
9.Edgerton M.Characterization of acquired denture pellicle from healthy and stomatitis patients[J].J,1992,68(4):683.
10.余占海,刘斌,周益民.口腔修复学理论与实践[M].北京:军事医学科学出版社,2004:97-107.
11.李笑梅.口腔修复材料的表面粗糙度及表面自由能对微生物粘附的影响[J].第二军医大学报, 2001,22(5):487-489.
12.Jagger DC,Harrison A.Denture cleaning the best approach [J].Br Dent J,1995,178(11):413-417.
13.余占海,刘斌,曹秀玲.RPDs对口腔微生态系影响的研究进展[J].广东牙病防治, 1995, 3(4):59-61.
14.杨向东,杨家瑞,刘景臣.义齿性口炎的临床分析[J].白求恩医科大学学报,1998,24(5):532-533.
15.Walker DM,Stafford DD, Huggdtt R,et al.The treatment of denture induce stomatitis[J].Br Dent,1981,151:416.
16.潘新华,汤国荣,李健.可摘义齿戴用时间和清洗方法与义齿性口炎的关系[J].临床口腔医学杂志,2000,16(3):170.
17.孙剑,杨宏军,朱群.可摘义齿基托材料与义齿性口炎的关系[J].海军医学杂志,2002,23(4):323-325.
18.Yamauchi M,Yamamoto K,Wakabayashi M,et al.In vitro adherence of micro organisms to denture base resin with different surface texture[J].Dent Mater J ,1990,9(1):19-24.
19.王珏,刘莉.两种树脂基托细菌粘附情况的比较[J].上海生物医学工程,2007,28(1):28-30.
20.何惠宇,朱明,阿达莱提等.金属基托承托区与非承托区口腔粘膜菌丛比较[J].新疆医科大学学报, 2003,226(1):54-55
21.刘广顺,陈树国,孟令强.义齿性口炎的病因及防治[J].中华老年口腔医学杂志,2007年, 5(3):177-179.
22.Yeung AL,Lo E C,Chow TW,et al.Oral health status of patients 5-6years after placement of Cobalt-chromium removable partial dentures[J].Oral Rehabil,2007,27(3):183-189.
23.Kawai K,UranoM,Ebisu S.Effect of surface roughness of porcelain on adhesion of bacteria and their synthesizing glucans[J].J Prosthet Dent,2000,83(6):664-667.
24.李笑梅,郭天文,周中华,等.表面粗糙度对铸造钛表面细菌粘附影响的临床研究[J].中华口腔医学杂志,2001,36(4):289-291.
25.郭吕华,魏娟,孙德文,等.纯钛铸造可摘义齿的临床应用[J].广东牙病防治,2004,12(3):187-189.
26.林江红,王莹,林晓静,等.钛合金铸造基托义齿在修复中的效果观察[J].实用医学杂志, 2008,24(12):2125-2127.
27.Chow CK,MatearDW,Lawrence HP,et al.Efficacy of antifungal agents in tissue conditioners in treating candidiasis[J].Gerodontology,1999,16(2):110-118.
28.陶人川,邓华颉,黄光武,等.伊曲康唑增强义齿软衬材料抗菌性的研究[J].临床口腔医学杂志, 2005,21(10):597-599.
29.董滢,尹路.纳米银应用于软衬材料的抗菌性实验研究[J].山西医科大学学报, 2006,37(8):860-862.
30.尹路,郭天文,王辉,等.纯钛镀制类金刚石薄膜的真菌粘附与细胞毒性研究[J].稀有金属材料与工程,2008,37(1):629.
31.赵兴科,王中.抛光技术的现状,表面技术.2000,29(2):6-7.
32.李伟力,刘鼎新.光固化复合树脂表面抛光的研究.现代口腔医学杂志.2002,16(5):416-417.
33.徐君伍,袁井圻,王忠义.口腔修复学.第1版.人民军医出版社.2002,449.
34.Lothar Borchers,Frank Tavassol,Harald Tschernitschek.Surface quality achieved by polishing and by varnishing of temporary crown and fixed partial denture resins.J Prosthet Dent.1999, 82:550-556.
35.Turkun LS,Turkun M.The effect of one-step polishing system on the surface roughness of three esthetic resin composite materials.Oper Dent.2004,29(2):203-211.
36.Choi MS,Lee YK,Lim BS,Rhee SH,Yang HC.Changes in surface characteristics of dental resin composites after polishing.Mater Sci Mater Med.2005,16(4):347-353.
37.Baseren M.Surface roughness of nanofill and nanohybrid composite resin and ormocer-based tooth-colored restorative materials after several finishing and polishing procedures.J Biomater Appl.2004,19(2):121-134.
38.任煜光,罔耀皓.复合树脂的修形磨光.口腔医学.1989,9(3):133-135.
39.K.Jung.Preparation of smooth and nanocrystalline diamond films.Diamond and Related Materials.1993,31(2):449-453.
40.Deniz Sen,The effect of two polishing pastes on the surface roughness of bis-acryl composite and methacrylate-based resins. J Prosthet Dent.2002,88:527-533.
41.H Nagem Filho.Surface Roughness of Composite Resins After Finishing and Polishing.Braz Dent J.2003,14(1):37-41.
42.Bouvier D,Drupez IP,Lissac M.Comparative evaluation of polishing systems on the surface of three aesthetic materials.J Oral Rehabil.1997,24:888-894.
43.G.Theuniers,M.De Clercq.Finishing procedures for the preparation of crown margins.The Journal of Prosthetic Dentistry.1987,58(5):545-552.
44.Lutz F,etal,J Am Dent Assoc.Quirynen M.The clinical meaning of the surface roughness and surface free energy of intra-oral hard substrate on the microbiology of the supra-and subgingival plaque:result of in vitro and in vivo experiment.J Dent,1994,22(1):513-516.