线性调频信号产生及压缩技术研究
详细信息    本馆镜像全文|  推荐本文 |  |   获取CNKI官网全文
摘要
论文结合某型号雷达系统的技战术指标要求,考虑现代信号处理技术与器件
    的发展,研究了线性调频信号(LFM)的产生、数字脉冲压缩技术及其工程设
    计等主要问题。
     论文讨论了线性调频信号产生的主要方法,比较了其主要性能和优缺点,决
    定采用直接数字频率合成(DDS)技术产生不同带宽和时宽的线性调频信号;论
    文从理论上分析了线性调频信号的脉冲压缩技术、性能、参数选择及提高压缩性
    能的方法,用计算机仿真技术研究了脉冲压缩的主要参数:A/D变换位数、采样
    频率、样点数目等和加窗技术对压缩性能:主副瓣比、压缩后的脉宽、目标分辨
    力等的影响,获得了大量的有用结果;论文最后结合某型号雷达系统的工程研制,
    提出了采用DDS技术产生LFM信号,以浮点DSP处理器APSP21062为核心的,
    并行处理的数字脉冲压缩工程设计方案,并做了相应的硬、软件设计说明。
In combination with technical and tactical specifications
    requirements of a radar
    with some type , this paper researches the generation of linear
    FM (LFM) signal
    digital pulse compression technique as well as the engineering
    design . The modem
    signal processing technique and development of elements are in
    consideration.
    
     This paper discusses main methods to generate LFM signal and
    disadvantages
    The direct digital synthesis (DDS) technique is decided to be
    used to generate LFM
    signal with different band width and time width .The paper
    analyzse in theory the LFM
    signal pulse compression technique, performance ,parameter
    selection and
    compression performance improvement methods . The computer
    simulition technique
    is used in this paper to study not only main parameters for pulse
    compression bits for
    A/D conversion, sampling frequency , and number of sample points
    but also the effect
    caused by windowing technique on the compression performance
    main-to-side lobe
    ratio , pulse width after compression and target resolution . A
    large amout of useful
    results are abtained . In combination with the engineering
    development for a radar
    some type , this paper finally gives a paralle-processed digital
    pulse compression
    engineering design scheme , in which DDS technique is adopted to
    generate LFM
    signal and floating-point DSP precessor ADSP2 1062 is the heart .
    The respective
    design descriptions are also made for hardware and software.
引文
[1]林茂庸、柯有安编.《雷达信号理论》第一版,北京,国防工业出版社1981
    [2]丁鹭飞、张平,《雷达系统》;西北电讯工程学院出版社,1984
    [3]赵树杰、史林编.《数字信号处理》西安.西安电子科技大学出版社1997
    [4]《XX雷达数字脉冲压缩方案报告》,西安导航技术研究所十八室
    [5]《对海侦察校射雷达综合论证报告》,西安导航技术研究所内部资料
    [6]耿富录.《现代模拟信号处理技术及应用》国防工业出版社1990
    [7]伊利·布鲁克纳编.《雷达技术》国防工业出版社1984
    [8]李衍忠、向敬成.‘DDS谱质分析及其杂散抑制研究综述’《现代雷达》2000,4
    [9]蔡英杰、向敬成‘宽带LFM/NLFM信号及其产生’系统工程与电子技术Vol.21,No.1.1999
    [10]Barton D.K. Radars volume3 pulse compression [M]. Dedham: Artech House Inc, 1975
    [11]安凌凌 多斜率线性调频信号的产生及其误差分析《现代雷达》1999年第三期
    [12]Mehrdad SoumeKH.《Synthetic Aperture Radar Signal Processing with MATLAB Algorithms》影印版 2000
    [13]G.W. kent, Neng-Haung Sheng. A high purity high speed direct digital Synthesizer. IEEE Proc. 49th AFCS, 1995:207~211
    [14]J.Van Kka. Methods of Mapping from phase to sine amplitude in direct digital synthesis,IEEE Proc. 50th AFCS, 1996:942~950
    [15]J.VanKKa. Spur reduction techniques in sine output direct digital synthesis, IEEE Proc, 50th AFCS, 1996:950~959
    [16]张群英,杨学贤,何佩琨,毛二可,A/D量化误差对脉冲压缩结果的影响.《现代雷达》,2000年第二期
    [17]杨斌、陈辅新、向敬成.多信号体制脉冲压缩系统研究.系统工程与电子技术,1999年第21卷第9期
    [18]文栋梁,有量化误差的线性调频信号脉压效果分析.系统工程与电子技术,1995年第2期
    [19]祝明波,常文革,梁甸农,采用数字方法实现宽带线性调频信号产生.系统工程与电子技术.2000年第5期
    [20]徐继麟,周先敏,王光泰等,-50dB旁瓣脉冲压缩信号处理新方法.信号处理.1999年第3期
    [21]吴明敏.数字脉压在火炮定位雷达中的应用,雷达与对抗.2000年第2期
    [22]张群英,龙腾,何佩琨,毛二可.一个高性能数字脉冲压缩系统的研制.北京理工大学学报.2000年第1期
    
    
    [23]愈根苗,昌峻.一种数字脉冲压缩系统.现化电子.1994年第12期
    [24]苏涛,吴顺君,廖晓群《高性能数字信号处理器与高速实时信号处理》.西安电子科技大学出版社 1999
    [25]Data Book 1999 AD.Corp.1999/12/19

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700