光栅传感器数据采集存储与离线分析系统的设计
详细信息    本馆镜像全文|  推荐本文 |  |   获取CNKI官网全文
摘要
地震勘探工作中,地震仪通过地震检波器采集信号。地震检波器是应用于地球物理勘探及工程测量领域的专用传感器,是为了接收和记录地震波而专门设计的一种精密的机械、电子组合装置,它性能的好坏直接影响地震记录质量和地震资料的解释工作,它是地震勘探数掘采集中最重要的一个环节。目前,地震仪的精度远远高于传统检波器的精度,地震检波器已经成为地震勘探领域发展的瓶颈,制约着地震勘探事业的发展。
     光栅数字地震检波器是利用光栅莫尔条纹技术丌发出来的一种新型数字检波器,并且使用细分技术进一步提高检波器的分辨力。随着细分精度的不断提高,与其配合工作的传统辨向技术已经不能完全满足系统得需要了,成为限制高精度细分发展的主要因素。如何解决传统辨向技术中存在的问题,使光栅数字检波器获得更高的分辨力成为本课题的主要任务之一。在研究传统辨向技术和细分技术的基础上,进行了新型硬件辨向电路方面的尝试,明确了硬件辨向电路中存在的问题。综合考虑数字细分和莫尔条纹辨向信号的特点,总结出通过数字信号辨向的方法,配合数字细分技术,实现了光栅数字地震检波器的全数字信号处理,大大提高了光栅数字地震检波器的分辨力。
     主要成果体现在以下方面:(1)采用了速度快、体积小、功耗低的compact flash作为存储介质来存储海量数据,实现了振动信号海量数据的采集和存储,并且为便携式的数据采集存储提出了可行的解决方案;(2)总结出硬件辨向与数字细分存在的矛盾,进行了新型硬件辨向电路的尝试,并且验证了传统辨向电路中存在的问题,明确了辨向电路限制了细分技术的发展;(3)总结出光栅检波器莫尔条纹正弦信号辨向的特点,并针对这些特点制定出周期幅值综合辨向法,采用周期幅值综合辨向法对所采集的数字信号完成精确辨向,有效的克服了传统硬件辨向电路精度低、误差大、触发信号存在延迟和机构复杂的缺点;(4)在精确数字辨向的保证下完成了高精度细分计算,大大体高了光栅数字地震检波器的分辨力。
     通过测试实验可以验证光栅数字地震检波器具有良好的性能,并且通过准确的数字辨向和高精度的数字细分进一步提高了系统的分辨力,相信光栅数字地震检波器将在未来的地震勘探等领域中广为应用。
The acquisition system obtains the geological information through the geophone in seism prospecting. Geophone is the special sensor that could convert signal of mechanical vibration into signal of electricity and could be used in seism prospecting or measure of project-field. It is also a special precision machining combined with electric instrument. Its capability directly affects recording quality of seismic wave and explaining of seismic data. It is the most important part during collecting seismic wave data. The seismograph has much better quality than geophone in the field of seism prospecting. So it is the bottleneck to progress the prospecting techniques. That is to say, the geophone restricts the seismograph to improve the precision of exploration.
    The up-to-date digital grating geophone has been developed based on moire technique. Using the subdivision technique, the geophone can improve its resolution further more. As the subdivision precision become higher and higher, the traditional direction-discriminating technology cannot meet the need of system. It has become the main factor that restricts the development of high precision subdivision technology. How to deal with the problems of traditional direction-discriminating technology has become one of the main tasks. So I study traditional direction-discriminating circuitries and other subdivision technology , have made a new type direction-discriminating circuitry in order to confirm the problems of traditional direction-discriminating circuitry. Take the characteristic of digital subdivision and moire fringe direction-discriminating signal into consideration , we can summarize the direction-discriminating measure using the digital signal. It can work with the digital subdivision technology, completes the digital grating geophone in digital signal processing. The resolution of the digital grating geophone can be markedly improved.
    The main achievements in scientific research are described as follow: (1) The compact flash , which has high speed, small figure and low power, is adopted to store the mass data. The mass vibrating signal data has been sampled and stored. And this is a practicable project for protable data sampling and storing. (2) The contradiction between direction-discriminating circuitry and digital subdivision technology has been found. A new type direction-discriminating circuitry has been made to confirm the problems in traditional direction-discriminating circuitry clearly exist. Traditional direction-discriminating circuitry undoubtedly restrict the development of subdivision technology. (3) The characteristics of the moire fringe
引文
[1] 陆基孟.地震勘探原理[M].石油工业出版社,1984
    [2] 何樵登.地震勘探原理与方法[M].地质出版社,1986
    [3] 李学峰.数据采集单元在地震勘探仪器中的应用研究[C].天津大学硕士学位论文,2000.12:1~30
    [4] 雷勇.检波器参数辨识方法与测试系统设计.西北工业大学硕士学位论文[C],2000.3:1-30
    [5] 杨海.常用检波器原理浅谈[J].物探装备,2001.11(4):281~282
    [6] 高华.地球物理勘探中新型地震检波器的研究[D].天津:天津大学硕士学位论文,,2004
    [7] 朱铉.数字地震仪的发展历史及展望[J].地球物理学进展,2002(6):301~304
    [8] 贾志新,李勤学,金抒辛,于立波,新型正交型三分量检波器的研制及现场试验[J],长春科技大学学报,2001,31(4):412~414
    [9] 李文彬,王晓鸣,赵国志,何勇,高分辨率地震勘探的垂向叠加震源研究[J],南京理工大学学报,2002,26(1):44~47
    [10] 柴书常,地震采集与仪器进化[J],石油仪器,1999,13(1):10~16
    [11] 付清锋,周明,地震检波器的进展[J],石油仪器,2000,14(2):25~27
    [12] 吴绍基,王裕庆,引进国外先进技术发展我国的地震检波器生产[J],石油物探快讯,1991,8(2):37~42
    [13] 付小宁.地震检波器参数测试的现状及动向[J],计量,2000,(3):30~31
    [14] 李淑清,南忠良,门长峰,李建良,付连昆,陶知非.光栅莫尔条纹技术在地震波检测中应用的理论分析[J],电子测量与仪器学报2002年增刊
    [15] 高华,李淑清,南忠良,陶知非,蒋诚志.光栅地震检波器的研究[J],航空精密制造技术,2003,(2):40~42
    [16] Shuqing Li, Zhongliang Nan, Jianling Li, et al. Research on digital grating vibration sensor[J], Proceedings of International Conference on Information Acquisition (IEEE Cat. No. 04EX908) 72-6 2004
    [17] Li Shuqing, Nan Zhongliang, Men Changfeng, et al. Study on the method and theory of seismic survey with grating vibrator[J], Chinese Journal of Scientific Instrument vol. 25, no. 3:399~401 June 2004
    [18] 曹广华,高分辨率地震勘探数据采集系统采集站技术研究[C],大庆石油学院硕士学位论文,2001(6)
    [19] 李庆忠,地震高分辨率勘探中的误区与对策[J],石油地球物理勘探,1997,32(4):751~783
    [20] 廖声刚,高精度地震勘探与地震数据采集系统[J],江汉石油科技,2002,12(3):10~15[4]
    [21] Angelika Taubner, Hans-Jurgen von Martens. Measurement of angular accelerations[J], angular velocities and rotation angles by grating interferometry Measurement 24 (1998) 21~32
    [22] 卢国纲.现代光栅测量技术[J],WMEM,2002,10(5):10~14
    [23] 苏绍琨.大量程纳米级光栅位移测量理论及关键技术研究[C],国防科学技术大学工学博士学位论文,2001(10)
    [24] Ya Min, Dai Fulong, Xie Huimin, et al. Measurement of non-uniform residual stresses by combined moire interferometry and hole-drilling method: theory, experimental method and applications[J], Acta Mechanica Sinica (English Series) vol. 19, no. 6:567-74 2003
    [25] Jinwon Joo, Seungmin Cho, Bongtae Han. Characterization of flexural. and thermo-mechanical behavior of plastic ball grid package assembly using moire interferometry[J], Microelectronics Reliability vol. 45, no. 3-4:637-46 March-April 2005
    [26] 张善钟等主编.计量光栅技术[M],机械工业出版社,1992年
    [27] 李谋等主编.位置检测与数显技术[M],机械工业出版社,1993年
    [28] 雷思孝,李伯成,雷向莉.单片机原理及实用技术——凌阳16位单片机原理及应用[M].西安:西安电子科技大学出版社,2004,1.
    [29] 罗亚非主编.凌阳16位单片机应用基础[M].北京航空航天大学出版社,2005,5.
    [30] 薛钧义主编.凌阳十六位单片机原理及应用[M].北京航空航天大学出版社,2003,2.
    [31] 李晶皎主编.嵌入式语音技术及凌阳16位单片机应用[M].北京航空航天大学出版社,2003,10.
    [32] CompactFlash Association, CF+ and Compact Flash Specification Revision 3.0[M].Compact Flash Association. 2003
    [33] 安海峰.存储卡选购、使用、维护之技巧,计算机与网络[J],2005,7: 11
    [34] SD Card Association, SD Memory Card Specifications[M].SD Card Association. 2001
    [35] Silicon Storage Technology, Inc. SST FlashFlex51 MCU Control of CompactFlash Card in TrueIDE Mode[J].2003
    [36] Silicon Storage Technology, Inc. SST FlashFlex51 MCU Control of CompactFlash Card in IO Mode[J].2003
    [37] Silicon Storage Technology, Inc. SST FlashFlex51 MCU Control of CompactFlash Card in Memory Mode[J].2003
    [38] 郭振武,李维祥,王文博.单片机实现对CF卡的读写[J].Microcontrollers & Embedded Systems. 2001,11:25~31
    [39] 程拥强,郭凤龙,朱劲.单片机对CF存储卡文件读写的实现[J].Computer Application.2003,23(9):46~48
    [40] FAT文件系统原理,http://www.sjhf.net
    [41] 刘育刚.DOS原理与结构[M].哈尔滨:哈尔滨工程大学出版社,1996
    [42] 胡元义.操作系统实践教程[M].西安:西安电子科技大学出版社,2001
    [43] NTFS vs FAT. http://www.NTFS.com
    [44] Jack Dobiash. FAT16 Structure Information. http://www.NTFS.com
    [45] THE FAT FILE SYSTEMS. FATS2 FAT16 FAT12. http://www.NTFS.com
    [46] FAT Sizes: FAT12, FAT16 and FAT32. http://www.PCGuide.com
    [47] CompactFlash Memory Card Product Manual[M].sandisk cooperation, 2003
    [48] Koulouras, G, Kontakos, K, Stavrakas, I, et al. Embedded compact flash[J].IEEE CIRCUITS DEVICE 21 (4): 27~34 JUL-AUG 2005
    [49] Qin Ya-jie, Zhou Rong-zheng, Yang Yi, et al. Design of embedded CF card controller in digital camera system[J].Journal of Fudan University (Natural Science) vol.42, no.1: 114-18 Feb. 2003
    [50] 卜佑军,胡泽明.CF卡芯片SST48CF024在嵌入式系统的应用[J],电子技术,2004,(11):46~49
    [51] 周军全,阎铁生,郭世明.CF卡在机车运用状念实时检测系统中的应用[J],电子测量技术,2005,(1):25~27
    [52] 王三武,张红涛.CF卡在大容量数据采集中的应用[J],微型机与应用,2004,(7):22~24
    [53] 毛晓燕,汤健彬,金建祥.基于8051的CF卡文件系统的实现[J],自动化 仪表,2003,24(6):33~37
    [54] 任少辉,王超,李杰,杨宗平,邹勇.基于Pocket PC的CF卡驱动程序设计[J],电子器件,2004.3,27(1):166~170
    [55] 吴中汉,孙志锋.嵌入式Linux下CF卡驱动程序的设计[J],计算机工程与应用,2005,18:115~117
    [56] 谈宏华,黎爱琼,陈家林,陈文进.用ARM7读写CF卡文件的技术实现[J],武汉化工学院学报,2005.1,27(1):60~63
    [57] 王跃琼,高速莫尔条纹信号单片机细分的一种方法[J],光学精密工程,1997,(2):112~118
    [58] 王凤丽.莫尔条纹高插补系数快速细分方法的研究[C],中国科学院研究生院硕士学位研究生学位论文,2002(3)
    [59] 孙贤颐,安维蓉,王志晓,任红忠.提高光栅测距精度的四倍频判向电路[J],北方交通大学学报,1996,(12):751~754
    [60] 张国雄,金篆芷.测控电路[M].机械工业出版社,2000
    [61] 李永敏,检测仪器电子电路[M].西北工业大学出版社,1994
    [62] 王作斌.莫尔条纹信号的快速细分方法[J],长春光学精密机械学院学报,1991,14:21 44~48
    [63] 朱彦芳,实现计量光栅高细分的比率幅值法[J],航空精密制造技术,1995,(4):29~32
    [64] 吕海宝,曹聚亮,苏绍景 莫尔条纹软件计数法[J],光学技术,2000,(11):543~545
    [65] Takada, Kazumasa, Satoh, Shin-ichi Method for measuring the phase error distribution of a wideband arrayed waveguide grating in the frequency domain[J]. Opt Lett 31 (3): 323-5 Feb 2006
    [66] Lee, YW, Nan, KJ, Jung, J, et al. Polarization-insensitive discrimination of strain and temperature based on long-period fiber grating inscribed on high-birefringent fiber ended with faraday rotator mirror[J].JPN J APPL PHYS 2 45 (1-3): L92-L95 JAN 2006
    [67] Ji, L, Mace, BR, Pinnington, RJ.A mode-based approach for the mid-frequency vibration analysis of coupled long-and short-wavelength structures[J].J SOUND VIB 289 (1-2): 148~170 JAN 3 2006
    [68] Yamashita, T., Fukamachi, K., Kemmochi, S. Low distortion and compact RF switch circuitry with the combination of PIN-diode and GaAs-FET for GSM quartet-band cellular phone. Conference Proceedings[D]. 34th European Microwave Conference (IEEE Cat. No. 04EX963) 733-6 vol. 2 2004
    [69] Yu Yunqiang. Anti-jamming technology of microcomputer measuring and controlling system[J].Control & Automation no.11A: 18~19 2004
    [70] Qi Qige, Liang Yuan, Guo Ke. Implementation of the double error detection methods of the modbus protocol using Microsoft Visual C++[J].Control & Automation no.1: 91-3 2004

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700