船舶随动吊装机构动力学及控制策略研究
|
摘要
随着经济和社会的快速发展,水上运输所拥有的低成本、运载量大等优势更为突出地体现出来。近几年,特别是在国际贸易中,水上运输占有了很大的运输比例。水上运输贸易的不断扩大,使得水上运输的安全性越来越受到关注。
船舶吊装机构是港口船舶装卸的重要工具,在港建水工作业、造船工程、桥梁建筑、水下打捞以及各种海洋工程中均有广泛的应用。吊装的安全性在水上运输安全中占有重要的地位。特别是在水上作战或救援时,船舶吊装机构要在海情恶劣的情况下实现大宗货物的及时移交和转移。此时,吊装过程的安全性集中体现在吊装机械的动态稳定性上。船舶吊装机构在吊装货物时,水上波浪的作用会引起船体的运动,导致吊装货物的摆动加大,给起吊操作带来危险,有时需被迫中止起吊作业。这可能导致极大的经济损失或军情延误,后果严重。研究船舶吊装随动机构的目的就是要提高吊装机构的动态稳定性,从而实现在较恶劣海情下,圆满完成军事和救援任务。
针对船舶吊装机构稳定性的高要求,本文主要从吊装机构控制策略的仿真分析上入手,结合Pro/E、ADAMS、MatLab/Simulink工具箱等辅助分析工具,在前人研究成果的基础上进一步优化完善船舶吊装随动系统的控制策略,来进一步提高船舶吊装机构的实际应用价值。
本文在分析研究船舶吊装机构时,主要研究了吊装机构在起吊作业时,如何更有效地对吊装货物的摆动进行控制,并结合延迟定位反馈控制的概念,设计了一种较合理的延迟定位反馈控制系统,减小船舶吊装机构在吊装货物时的摆动,使得在本来不能进行吊装作业的水况下能进行物资的起吊和运送。本文的研究具有较大的商业价值和潜在的军事价值。
With the rapid development of economy and society, water transport plays an important role with the advantages of low cost, big load amount, and so on. In recent years, water transport has occupied a large proportion of transport in the international trade. As the expanding trade, the safety of water transportation has been attracted more and more attention.
Marine hoisting mechanism is quite important in port handling. It is widely used in building ports, shipbuilding projects and other kinds of ocean engineering. The safety of hoisting plays an important role in the safety of water transport. Especially in aquatic combat or rescue, it is used to transfer or shift cargo in time. Under this condition, the safety of hoisting process is depended on dynamic stability of hoisting mechanism. The wave-induced motion of the crane ship may produce severe pendulation of hoisting cargo, which brings danger to hoisting process, and sometimes hoisting operations have to be stopped. As a result, serious economic losses and military delay may be caused. Thus, it’s very necessary to study how to improve the dynamic stability of hoisting mechanism.
In view of the hoisting stability of ship-mounted crane, a new stability control strategy of hoisting is simulated and analyzed in this dissertation. The control strategy of marine hoisting servo system is optimized and improved through several assistant softwares just like Pro/E, ADAMS and MatLab/Simulink toolbox. Result of the simulation shows that the pendulation of cargo could be suppressed very well by this strategy.
The mechanism of pendulation of hoisting cargo and the ways to design an effective pendulation suppression system are mainly discussed in this dissertation. The concept of delayed-position feedback is adopted in this pendulation suppression strategy, which can evidently reduce pendulation of hoisting cargo. Consequently, cargo transferring under worse conditions can be realized. Both commercial and military value could be got through the result of this dissertation.
船舶吊装机构是港口船舶装卸的重要工具,在港建水工作业、造船工程、桥梁建筑、水下打捞以及各种海洋工程中均有广泛的应用。吊装的安全性在水上运输安全中占有重要的地位。特别是在水上作战或救援时,船舶吊装机构要在海情恶劣的情况下实现大宗货物的及时移交和转移。此时,吊装过程的安全性集中体现在吊装机械的动态稳定性上。船舶吊装机构在吊装货物时,水上波浪的作用会引起船体的运动,导致吊装货物的摆动加大,给起吊操作带来危险,有时需被迫中止起吊作业。这可能导致极大的经济损失或军情延误,后果严重。研究船舶吊装随动机构的目的就是要提高吊装机构的动态稳定性,从而实现在较恶劣海情下,圆满完成军事和救援任务。
针对船舶吊装机构稳定性的高要求,本文主要从吊装机构控制策略的仿真分析上入手,结合Pro/E、ADAMS、MatLab/Simulink工具箱等辅助分析工具,在前人研究成果的基础上进一步优化完善船舶吊装随动系统的控制策略,来进一步提高船舶吊装机构的实际应用价值。
本文在分析研究船舶吊装机构时,主要研究了吊装机构在起吊作业时,如何更有效地对吊装货物的摆动进行控制,并结合延迟定位反馈控制的概念,设计了一种较合理的延迟定位反馈控制系统,减小船舶吊装机构在吊装货物时的摆动,使得在本来不能进行吊装作业的水况下能进行物资的起吊和运送。本文的研究具有较大的商业价值和潜在的军事价值。
With the rapid development of economy and society, water transport plays an important role with the advantages of low cost, big load amount, and so on. In recent years, water transport has occupied a large proportion of transport in the international trade. As the expanding trade, the safety of water transportation has been attracted more and more attention.
Marine hoisting mechanism is quite important in port handling. It is widely used in building ports, shipbuilding projects and other kinds of ocean engineering. The safety of hoisting plays an important role in the safety of water transport. Especially in aquatic combat or rescue, it is used to transfer or shift cargo in time. Under this condition, the safety of hoisting process is depended on dynamic stability of hoisting mechanism. The wave-induced motion of the crane ship may produce severe pendulation of hoisting cargo, which brings danger to hoisting process, and sometimes hoisting operations have to be stopped. As a result, serious economic losses and military delay may be caused. Thus, it’s very necessary to study how to improve the dynamic stability of hoisting mechanism.
In view of the hoisting stability of ship-mounted crane, a new stability control strategy of hoisting is simulated and analyzed in this dissertation. The control strategy of marine hoisting servo system is optimized and improved through several assistant softwares just like Pro/E, ADAMS and MatLab/Simulink toolbox. Result of the simulation shows that the pendulation of cargo could be suppressed very well by this strategy.
The mechanism of pendulation of hoisting cargo and the ways to design an effective pendulation suppression system are mainly discussed in this dissertation. The concept of delayed-position feedback is adopted in this pendulation suppression strategy, which can evidently reduce pendulation of hoisting cargo. Consequently, cargo transferring under worse conditions can be realized. Both commercial and military value could be got through the result of this dissertation.
引文
[1]王凤武,郑中义,吴兆麟.大风浪船舶安全航行的研究综述,大连海事大学学报,2002, 28(4):62～63
[2]郭昌捷,张道坤,李建军.综合安全评估在船舶装卸载过程中应用,大连理工大学学报, 2002,第9期
[3]张文斌.姚震球.蒋志勇.船舶稳性理论研究的方法及进展,华东船舶工业学院学报(自然科学版), 2002,16(1)
[4]孙海涛.船舶波浪稳性的数学模型及在滚装船上的应用,[大连海事大学硕士论文],大连,大连理工大学,2002
[5] A Mathematical model of motions leading to capsize in astern waves Masami Hamamoto, Abdul Munif Contemporary Ideas on Ship Stability 2000
[6]董艳秋,纪凯,黄衍顺.波浪中船舶横摇稳性的研究,船舶力学,1999,3(2)
[7]林焰,邢殿录,纪卓尚,等.船舶随浪运动稳性仿真计算,海洋工程,1994,12(3)
[8]范佘明,船舶在随浪中的运动与横甩预报,船舶,2001,第1期
[9]孔祥金,曹振海.尾斜浪中船舶复原力矩计算,中国造船,1994,第2期
[10]刘家新,蔡岭梅.风浪中稳性衡准研究,武汉造船,1995,第1期
[11]郑俊武,唐友刚,孟昭寅,等.船舶横摇与纵摇运动的非线性耦合方程.天津大学学报,1998,第11期
[12]袁远,成志军,金咸定.船舶在波浪中运动的六自由度非线性耦合方程,上海交通大学学报,2001,35(4)
[13]张丽,刘习军,唐友刚.随机海况下的非线性船舶横摇和倾覆,舰船科学技术,2002, 24(4)
[14] Patch, M .Brown,D., and Witz,J. Operability Analysis for a Monohull Crane Vessel, Transaction of the Roy Vaughers, T. Joint Logistics Over the Shore Operations, Naval Engineers Journal,1994,106 (3): Pages206～263
[15] Vaughers, T., Mardiros, M. Joint Logistics Over the Shore Operations in Rough Seas, Naval Engineers Journal,1979,Pages385～393
[16] Rawston, P. J.,Blight, U. J. Prediction of Weather Fowntime for Derrick Barges, Proceedings of the 10th Annual Offshore Technology Conference,OTC 3150,1978
[17] Nojiri N.,Sasaki, T. Motion Characteristics of Crane Vessels in Lifting Operation, Proceedings of the 15th Annual Offshore Technology Conference, OTC 4603,1983
[18] Elling, R. E.,McClinton, A. T. Dynamic Loading of Shipboard Cranes,Ocean 1973IEEE International Conference on Engineering in the Ocean Environment,1973,Pages 174～177
[19] Miles,J. W. Stability of Forced Oscillations of a Spherical Pendulum, Quart. App1. Math ., 1962,V,20: Pages 21～32
[20] Miles,J. W. Resonant Motion of a Spherical Pendulum, Physical D,1984,11D(3):Pages309～323
[21] Patel,M.,Brown, D.,and Witz, J.“Operability Analysis for a Monohull Crane Vessel”,Transaction of the Royal Institute of Naval Architects,1987,129: Pages103～113
[22] Mc Cormick, F.J.,and Witz, J.A. An Investigation into the Parametric Excitation of Suspended Loads During Crane Vessel Operations, Underwater Technology, 1993, V,19: Pages30～39
[23] Witz, J. Parametric Excitation of Crane Loads in Moderate Sea States, Ocean Engineering, 1995,22: Pages411～420
[24]薛树功.舰载起重机转载控制及仿真,[哈尔滨工程大学硕士学位论文] ,哈尔滨,哈尔滨工程大学,2004
[25] Schellin,T.E.,Sharma, S.D.,and Jiang, T. Crane Ship Response to Regular Naves, Proceedings of the 8th International Conference on Offshore Mechanics and Arctic Engineering, ASME,1989Ⅱ: Pages627～635
[26] Schcllin, T. E.,Jiang, T.,and Sharma, S. D. Crane Ship Response to Wave Groups, Journal of Offshore Mechanics and Arctic Engineering,1991,113: Pages211～218
[27] Kral,R.,Kreuzer,E.,and Wilmers,C. Nonlinear Oscillations of a Crane Ship,Z. Angew Math. Mech.,1996,76(S4): Pages5～8
[28] Chin,C.,Nayfeh, A. H.,and Abdel-Rahman, E. Nonlinear Dynamics of a Boom Crane, Journal of Vibration and Control, in press2000
[29] Posiadala, B. Skalmierski,B.,and Tomski, L. Motion of the Lifted Load Brought by a Kinematical Forcing Crane Telescopic Boom, Mechanism and Machine Theory,1990,25: Pages547～556
[30] Posiadala, B.,Skalmierski, B.,and Tomski,L. Vibration of Load Lifted by a Truck Crane with Consideration of Physical Properties of Rope, Machine Dynamics Problems,1991,2: Pages85～104
[31]陆卫杰.舰艇并靠导弹补给及波浪补偿装置的研究,[南京理工大学博士学位论文],南京,南京理工大学,2006
[32] Posiadala, B. Influence of Crane Support System on Motion of the Lifted Load, Mechanism and Machine Theory,1997,32: Pages9～20
[33] Towarek, Z. The Dynamic Stability of a Crane Standing on Soil During the Rotation of the Boom, International Journal of Mechanical Sciences,1998,40: Pages557～574
[34] Ito,H.,Senda,Y.,and Fujimoto,H. Dynamic Behavior of a Load Lifted by a Mobile Construction-Type Crane, Bulletin of JSML,1978, 21(154): Pages600～608
[35]董艳秋,林维学.起重船吊杆在波浪作用下的动力响应,天津大学学报,1987(1):69～76
[36]董艳秋,韩光.起重船吊物系统在波浪中的动力响应,中国造船,1992,第1期
[37] Lewis, D.,Parker, G.G.,Driessen,B.,and Robinett, R. D. Command Shaping Control of an Operator-in-the-Loop Boom Crane, Proceedings of the American Control Conference, 1998,Pages2643～2647
[38] Parker, G. G.,Groom, K.,Hurtado, J. E.,Feddema, J.,Robinett, R. D.,and Leban, F. Experimental Verification of a Command Shaping Boom Crane Control System, Proceedings of the American Control Conference,1999,Pages86～90
[39] Gustafsson, T. Modeling and Control of a Rotary Crane, Proceedings of the 3rd European Control Conference,1990,Pages3805～3810
[40] Burg, T.,Dawson, D.,Rahn, C.,and Rhodes, W. Nonlinear Control of an Overhead Crane via the Saturating Control Approach of Teel, Proceedings of the 1996 IEEE International Conference on Robotics and Automation,1996,Pages3155～3160
[41] Hara, K.,Tetsuhiko, T.,Kobayashi, A.,and Okamoto, M. Jib Crane Control to Suppress Load Swing, International .Journal of Systems Science,1989,20(5): Pages710～731
[42] Souissi, R.,and Koivo,A. J. Modeling and Control of a Rotary Crane for Swing-free Transport of Payloads , First IEEE conference on Control Applications,1992,2: Pages782～787
[43] Sakawa, Y.,Shindo, Y.,and Hashimoto,Y. Optimal Control of a Rotary Crane, Journal of Optimization Theory and Applications,1981,35(4): Pages535～557
[44] Sakawa, Y.,and Nakazumi, A. Modeling and Control of a Rotary Crane, Transactions of the ASME Journal of Dynamic Systems, Measurement and Control,1985,107: Pages200～206
[45] Sato, K.,and Sakawa, Y. Modeling and Control of a Flexible Rotary Crane, International Journal of Control,1988,48 (5): Pages2085～2105
[46] Parker, G. G.,Petterson, B.,Dohrmann, C.R.,and Robinett, R.D. Command Shaping For Residual Vibration Free Crane Maneuvers, Proceedings of the American Control Conference, 1995, Pages934～938
[47] Golafshani, A. R.,and Aplevich, J. D. Computation of Time-Optimal Trajectories for Tower Cranes, Proceedings of the IEEE Conference on Control Applications,1995,Pages1134～1139
[48] Alsop, C. F.,Forster, G. A.,and Holmes, F. R. Ore Unloader Automation-A Feasibility Study, Proceedings of IFAC on Systems Engineering for Control Systems,1965,Pages295～305
[49] Carbon, L. Automation of Grab Cranes, Siemens Review XLⅢ,1976, 2: Pages80～85
[50] Osinski, M., and Wojciech, S. Application of Nonlinear Optimization Methods to Input Shaping of the Hoist Drive of an Off-Shore Crane, Nonlinear Dynamics,1998,17: Pages369～386
[51] Koscielny, R., Wojciech, S. Nonlinear Vibration of Subsystem in Various Media Conditions, Structural Dynamics and Vibration,1994,63: Pages47～52
[52] Osinski, M., Wojciech, S. Dynamics of Hoisting Appliances in Maritime Conditions,Machine Vibration,1994,3: Pages76-84
[53] Iwasaki,I.,Tanida, K.,Kaji, S.,and Mutaguchi, M. Development of an Active Mass Damper for Stabilizing the Load Suspended on a Floating Crane, Proceedings of the ASME Design Engineering Technical Conference, DETC97-VIB-3816, 1997
[54] Imazeki, M., Mutaguchi, M.,Iwasaki,I.,and Tanida, K. Active Mass Damper for Stabilizing the Load Suspended on a Floating Crane, IHI Engineering Review 1998, 31(2): Pages61～69
[55] Balachandran, B., Li, Y. A Mechanical Filter Concept to Suppress Crane Load Oscillations, Proceedings of the DETC'97 ASME Design Engineering Technical Conferences, DETC97-VIB-4091,1997
[56] Balachandran, B., ti, Y.,and Fang, C. A Mechanical Filter Concept for Control of Non-Linear Crane-Load Oscillations, Journal of Sound and Vibration,1999,228(3): Pages651～682
[57] Li, Y.,and Balachandran, B. Mechanical Filters for Control of Crane-Load Oscillations, Proceedings of the MURI on Nonlinear Active Control of Dynamical Systems, l999
[58] Yuan, G. H.,Hunt, R. R.,fTrehogi,C.,Ott, E.,Yorke, J. A.,and KosLelich, E. J. Design and Control of Shipboard Cranes, Proceedings of the DETC'97 ASME Design Engineering Technical Conferences, DETC97-VIB-4095, 1997
[59] Kimiaghalam, B., Homaifar, A., Bikdash, M. Fuzzy Dynamic Friction Controller for a Ship Crane, Proceedings of the 6th International Conference on Fuzzy Theory and Technology, 1998, 1: Pages203～206
[60] Kimiaghalam, H., I Ioma i f ar, A., Bikdash, M. Pendulation Suppression of a Shipboard Crane Using Fuzzy Controller, Proceedings of the American Control Conference,1999,Pages586～590
[61] Kimiaghalam, B., Homaifar, A., Bikdash, M. Feedback and Feedforward Control Law for a Ship Crane With Maryland Rigging System, Proceedings of the American Control Conference, 2000
[62] Wen, B.,Homaifar, A.,Bikdash, M.,and Kimiaghalam, B. Modeling and Optimal Control Design of Shipboard Crane, Proceedings of the American Control Conference,1999, Pages593～597
[63] Wen, B.,Kimiaghalam, B.,Homaifar, A .and Bikdash, M. Modeling and Control of shipboard Crane, Proceedings of the world automation Congress, 2000
[64] Abdel-Rahman, E. M.,and Nayfeh, A. H. Cargo-Pendulation Reduction in Boom Cranes via Cable-Length Manipulation, Proceedings of the 41th AIAA Structure Dynamics and Material Conference, AIAA-2000-1041,2000
[65] Hubbell, J.T., Koch, B., and McCormick, D. Modern Crane Control Enhancements, Posrts92, 1992, Pages757～767
[66] Z. N. MASOUD,A. H. NAYFEH, and D. T. MOOK .Cargo Pendulation Reduction of Ship-Mounted Cranes Nonlinear Dynamics, 2004,35: Pages299～311
[67]孙江龙,叶恒奎.船舶在波浪中运动的计算机仿真,计算机仿真,2004,第1期
[68]江红,赵忠华,张炎华.船舶振荡运动仿真,上海交通大学学报,2001,第10期
[69] A. Bruce Dunwoody, Roll of ship in Asten Sea-Response to GM Fluctuation, Journal of ship Research, Vol.33, No. 4 Dec. 1999, Pages284～290
[70]刘应中,缪国平.船舶在波浪上的运动理论,上海,上海交通大学出版社,1987
[71]盛振邦,杨尚荣,陈雪深.船舶静力学,上海,上海交通大学出版社,1993
[72] A.Bruce Dunwoody, Roll of ship in Astern Sea-Metacentric Height Spectra, Journal of ship Research, Vol. 33, No.4, Dec. 1989, Pages221～223/227～228
[73] H. Kwakernaak and R. Swan, Linear Optimal Control Systems, Wiley Interscience, New York, 1972
[74] I. H. Suh and Z. Bien, Use of time-delay actions in the controller design,IEEE Trans. Au t. Contr. AC-25,1980,Pages600～603
[75]袁志刚,臧铁钢,基于PRO/E和ADAMS的船用吊装机构的仿真研究,机电工程技术,2008,37(2):18～20
[76]陈立平,张云清,任卫群,等.机械系统动力学分析急ADAMS应用教程,北京,清华大学出版社, 2006
[77]李军,邢俊文,覃文洁,等.ADAMS实例教程,北京,北京理工大学出版社,2002
[78]袁志刚,臧铁钢.基于ADAMS平台的钢索系列物体建模环境的研究,机械工程师,2007,(10):82～84
[79]范成建,熊光明,周明飞.虚拟样机软件MSC.ADAMS应用与提高,北京,机械工业出版社,2006
[2]郭昌捷,张道坤,李建军.综合安全评估在船舶装卸载过程中应用,大连理工大学学报, 2002,第9期
[3]张文斌.姚震球.蒋志勇.船舶稳性理论研究的方法及进展,华东船舶工业学院学报(自然科学版), 2002,16(1)
[4]孙海涛.船舶波浪稳性的数学模型及在滚装船上的应用,[大连海事大学硕士论文],大连,大连理工大学,2002
[5] A Mathematical model of motions leading to capsize in astern waves Masami Hamamoto, Abdul Munif Contemporary Ideas on Ship Stability 2000
[6]董艳秋,纪凯,黄衍顺.波浪中船舶横摇稳性的研究,船舶力学,1999,3(2)
[7]林焰,邢殿录,纪卓尚,等.船舶随浪运动稳性仿真计算,海洋工程,1994,12(3)
[8]范佘明,船舶在随浪中的运动与横甩预报,船舶,2001,第1期
[9]孔祥金,曹振海.尾斜浪中船舶复原力矩计算,中国造船,1994,第2期
[10]刘家新,蔡岭梅.风浪中稳性衡准研究,武汉造船,1995,第1期
[11]郑俊武,唐友刚,孟昭寅,等.船舶横摇与纵摇运动的非线性耦合方程.天津大学学报,1998,第11期
[12]袁远,成志军,金咸定.船舶在波浪中运动的六自由度非线性耦合方程,上海交通大学学报,2001,35(4)
[13]张丽,刘习军,唐友刚.随机海况下的非线性船舶横摇和倾覆,舰船科学技术,2002, 24(4)
[14] Patch, M .Brown,D., and Witz,J. Operability Analysis for a Monohull Crane Vessel, Transaction of the Roy Vaughers, T. Joint Logistics Over the Shore Operations, Naval Engineers Journal,1994,106 (3): Pages206～263
[15] Vaughers, T., Mardiros, M. Joint Logistics Over the Shore Operations in Rough Seas, Naval Engineers Journal,1979,Pages385～393
[16] Rawston, P. J.,Blight, U. J. Prediction of Weather Fowntime for Derrick Barges, Proceedings of the 10th Annual Offshore Technology Conference,OTC 3150,1978
[17] Nojiri N.,Sasaki, T. Motion Characteristics of Crane Vessels in Lifting Operation, Proceedings of the 15th Annual Offshore Technology Conference, OTC 4603,1983
[18] Elling, R. E.,McClinton, A. T. Dynamic Loading of Shipboard Cranes,Ocean 1973IEEE International Conference on Engineering in the Ocean Environment,1973,Pages 174～177
[19] Miles,J. W. Stability of Forced Oscillations of a Spherical Pendulum, Quart. App1. Math ., 1962,V,20: Pages 21～32
[20] Miles,J. W. Resonant Motion of a Spherical Pendulum, Physical D,1984,11D(3):Pages309～323
[21] Patel,M.,Brown, D.,and Witz, J.“Operability Analysis for a Monohull Crane Vessel”,Transaction of the Royal Institute of Naval Architects,1987,129: Pages103～113
[22] Mc Cormick, F.J.,and Witz, J.A. An Investigation into the Parametric Excitation of Suspended Loads During Crane Vessel Operations, Underwater Technology, 1993, V,19: Pages30～39
[23] Witz, J. Parametric Excitation of Crane Loads in Moderate Sea States, Ocean Engineering, 1995,22: Pages411～420
[24]薛树功.舰载起重机转载控制及仿真,[哈尔滨工程大学硕士学位论文] ,哈尔滨,哈尔滨工程大学,2004
[25] Schellin,T.E.,Sharma, S.D.,and Jiang, T. Crane Ship Response to Regular Naves, Proceedings of the 8th International Conference on Offshore Mechanics and Arctic Engineering, ASME,1989Ⅱ: Pages627～635
[26] Schcllin, T. E.,Jiang, T.,and Sharma, S. D. Crane Ship Response to Wave Groups, Journal of Offshore Mechanics and Arctic Engineering,1991,113: Pages211～218
[27] Kral,R.,Kreuzer,E.,and Wilmers,C. Nonlinear Oscillations of a Crane Ship,Z. Angew Math. Mech.,1996,76(S4): Pages5～8
[28] Chin,C.,Nayfeh, A. H.,and Abdel-Rahman, E. Nonlinear Dynamics of a Boom Crane, Journal of Vibration and Control, in press2000
[29] Posiadala, B. Skalmierski,B.,and Tomski, L. Motion of the Lifted Load Brought by a Kinematical Forcing Crane Telescopic Boom, Mechanism and Machine Theory,1990,25: Pages547～556
[30] Posiadala, B.,Skalmierski, B.,and Tomski,L. Vibration of Load Lifted by a Truck Crane with Consideration of Physical Properties of Rope, Machine Dynamics Problems,1991,2: Pages85～104
[31]陆卫杰.舰艇并靠导弹补给及波浪补偿装置的研究,[南京理工大学博士学位论文],南京,南京理工大学,2006
[32] Posiadala, B. Influence of Crane Support System on Motion of the Lifted Load, Mechanism and Machine Theory,1997,32: Pages9～20
[33] Towarek, Z. The Dynamic Stability of a Crane Standing on Soil During the Rotation of the Boom, International Journal of Mechanical Sciences,1998,40: Pages557～574
[34] Ito,H.,Senda,Y.,and Fujimoto,H. Dynamic Behavior of a Load Lifted by a Mobile Construction-Type Crane, Bulletin of JSML,1978, 21(154): Pages600～608
[35]董艳秋,林维学.起重船吊杆在波浪作用下的动力响应,天津大学学报,1987(1):69～76
[36]董艳秋,韩光.起重船吊物系统在波浪中的动力响应,中国造船,1992,第1期
[37] Lewis, D.,Parker, G.G.,Driessen,B.,and Robinett, R. D. Command Shaping Control of an Operator-in-the-Loop Boom Crane, Proceedings of the American Control Conference, 1998,Pages2643～2647
[38] Parker, G. G.,Groom, K.,Hurtado, J. E.,Feddema, J.,Robinett, R. D.,and Leban, F. Experimental Verification of a Command Shaping Boom Crane Control System, Proceedings of the American Control Conference,1999,Pages86～90
[39] Gustafsson, T. Modeling and Control of a Rotary Crane, Proceedings of the 3rd European Control Conference,1990,Pages3805～3810
[40] Burg, T.,Dawson, D.,Rahn, C.,and Rhodes, W. Nonlinear Control of an Overhead Crane via the Saturating Control Approach of Teel, Proceedings of the 1996 IEEE International Conference on Robotics and Automation,1996,Pages3155～3160
[41] Hara, K.,Tetsuhiko, T.,Kobayashi, A.,and Okamoto, M. Jib Crane Control to Suppress Load Swing, International .Journal of Systems Science,1989,20(5): Pages710～731
[42] Souissi, R.,and Koivo,A. J. Modeling and Control of a Rotary Crane for Swing-free Transport of Payloads , First IEEE conference on Control Applications,1992,2: Pages782～787
[43] Sakawa, Y.,Shindo, Y.,and Hashimoto,Y. Optimal Control of a Rotary Crane, Journal of Optimization Theory and Applications,1981,35(4): Pages535～557
[44] Sakawa, Y.,and Nakazumi, A. Modeling and Control of a Rotary Crane, Transactions of the ASME Journal of Dynamic Systems, Measurement and Control,1985,107: Pages200～206
[45] Sato, K.,and Sakawa, Y. Modeling and Control of a Flexible Rotary Crane, International Journal of Control,1988,48 (5): Pages2085～2105
[46] Parker, G. G.,Petterson, B.,Dohrmann, C.R.,and Robinett, R.D. Command Shaping For Residual Vibration Free Crane Maneuvers, Proceedings of the American Control Conference, 1995, Pages934～938
[47] Golafshani, A. R.,and Aplevich, J. D. Computation of Time-Optimal Trajectories for Tower Cranes, Proceedings of the IEEE Conference on Control Applications,1995,Pages1134～1139
[48] Alsop, C. F.,Forster, G. A.,and Holmes, F. R. Ore Unloader Automation-A Feasibility Study, Proceedings of IFAC on Systems Engineering for Control Systems,1965,Pages295～305
[49] Carbon, L. Automation of Grab Cranes, Siemens Review XLⅢ,1976, 2: Pages80～85
[50] Osinski, M., and Wojciech, S. Application of Nonlinear Optimization Methods to Input Shaping of the Hoist Drive of an Off-Shore Crane, Nonlinear Dynamics,1998,17: Pages369～386
[51] Koscielny, R., Wojciech, S. Nonlinear Vibration of Subsystem in Various Media Conditions, Structural Dynamics and Vibration,1994,63: Pages47～52
[52] Osinski, M., Wojciech, S. Dynamics of Hoisting Appliances in Maritime Conditions,Machine Vibration,1994,3: Pages76-84
[53] Iwasaki,I.,Tanida, K.,Kaji, S.,and Mutaguchi, M. Development of an Active Mass Damper for Stabilizing the Load Suspended on a Floating Crane, Proceedings of the ASME Design Engineering Technical Conference, DETC97-VIB-3816, 1997
[54] Imazeki, M., Mutaguchi, M.,Iwasaki,I.,and Tanida, K. Active Mass Damper for Stabilizing the Load Suspended on a Floating Crane, IHI Engineering Review 1998, 31(2): Pages61～69
[55] Balachandran, B., Li, Y. A Mechanical Filter Concept to Suppress Crane Load Oscillations, Proceedings of the DETC'97 ASME Design Engineering Technical Conferences, DETC97-VIB-4091,1997
[56] Balachandran, B., ti, Y.,and Fang, C. A Mechanical Filter Concept for Control of Non-Linear Crane-Load Oscillations, Journal of Sound and Vibration,1999,228(3): Pages651～682
[57] Li, Y.,and Balachandran, B. Mechanical Filters for Control of Crane-Load Oscillations, Proceedings of the MURI on Nonlinear Active Control of Dynamical Systems, l999
[58] Yuan, G. H.,Hunt, R. R.,fTrehogi,C.,Ott, E.,Yorke, J. A.,and KosLelich, E. J. Design and Control of Shipboard Cranes, Proceedings of the DETC'97 ASME Design Engineering Technical Conferences, DETC97-VIB-4095, 1997
[59] Kimiaghalam, B., Homaifar, A., Bikdash, M. Fuzzy Dynamic Friction Controller for a Ship Crane, Proceedings of the 6th International Conference on Fuzzy Theory and Technology, 1998, 1: Pages203～206
[60] Kimiaghalam, H., I Ioma i f ar, A., Bikdash, M. Pendulation Suppression of a Shipboard Crane Using Fuzzy Controller, Proceedings of the American Control Conference,1999,Pages586～590
[61] Kimiaghalam, B., Homaifar, A., Bikdash, M. Feedback and Feedforward Control Law for a Ship Crane With Maryland Rigging System, Proceedings of the American Control Conference, 2000
[62] Wen, B.,Homaifar, A.,Bikdash, M.,and Kimiaghalam, B. Modeling and Optimal Control Design of Shipboard Crane, Proceedings of the American Control Conference,1999, Pages593～597
[63] Wen, B.,Kimiaghalam, B.,Homaifar, A .and Bikdash, M. Modeling and Control of shipboard Crane, Proceedings of the world automation Congress, 2000
[64] Abdel-Rahman, E. M.,and Nayfeh, A. H. Cargo-Pendulation Reduction in Boom Cranes via Cable-Length Manipulation, Proceedings of the 41th AIAA Structure Dynamics and Material Conference, AIAA-2000-1041,2000
[65] Hubbell, J.T., Koch, B., and McCormick, D. Modern Crane Control Enhancements, Posrts92, 1992, Pages757～767
[66] Z. N. MASOUD,A. H. NAYFEH, and D. T. MOOK .Cargo Pendulation Reduction of Ship-Mounted Cranes Nonlinear Dynamics, 2004,35: Pages299～311
[67]孙江龙,叶恒奎.船舶在波浪中运动的计算机仿真,计算机仿真,2004,第1期
[68]江红,赵忠华,张炎华.船舶振荡运动仿真,上海交通大学学报,2001,第10期
[69] A. Bruce Dunwoody, Roll of ship in Asten Sea-Response to GM Fluctuation, Journal of ship Research, Vol.33, No. 4 Dec. 1999, Pages284～290
[70]刘应中,缪国平.船舶在波浪上的运动理论,上海,上海交通大学出版社,1987
[71]盛振邦,杨尚荣,陈雪深.船舶静力学,上海,上海交通大学出版社,1993
[72] A.Bruce Dunwoody, Roll of ship in Astern Sea-Metacentric Height Spectra, Journal of ship Research, Vol. 33, No.4, Dec. 1989, Pages221～223/227～228
[73] H. Kwakernaak and R. Swan, Linear Optimal Control Systems, Wiley Interscience, New York, 1972
[74] I. H. Suh and Z. Bien, Use of time-delay actions in the controller design,IEEE Trans. Au t. Contr. AC-25,1980,Pages600～603
[75]袁志刚,臧铁钢,基于PRO/E和ADAMS的船用吊装机构的仿真研究,机电工程技术,2008,37(2):18～20
[76]陈立平,张云清,任卫群,等.机械系统动力学分析急ADAMS应用教程,北京,清华大学出版社, 2006
[77]李军,邢俊文,覃文洁,等.ADAMS实例教程,北京,北京理工大学出版社,2002
[78]袁志刚,臧铁钢.基于ADAMS平台的钢索系列物体建模环境的研究,机械工程师,2007,(10):82～84
[79]范成建,熊光明,周明飞.虚拟样机软件MSC.ADAMS应用与提高,北京,机械工业出版社,2006