低频振动注射对聚合物流变行为及试样结构与性能的研究
|
摘要
近年来,熔体振动技术作为一种有效的形态控制技术得到了比较广泛的研究。本课题组创造性地研制了两套振动注射成型装置来分别实现对聚合物熔体的剪切振动和压力振动,并围绕低频振动注射成型工艺的研发、应用,对聚合物熔体的加工流变性能影响,制备的哑铃试样和方片试样的力学性能、结晶行为、相形态进行了系统的研究,得到了富有科学意义的理论成果,为改善聚合物的加工流变性能、实现聚合物自增强、自增韧开创了一个新的方法,为工业化生产奠定了必要的理论和实践基础。研究中取得的主要成果如下:
1.低频振动注射成型装置的研制。
以实现低频振动注射成型技术为目的,创造性地分别设计了剪切振动和压力振动实验装置,将不同类型的振动场巧妙地与注射过程有机地结合在一起,并能分别实现常规注射和振动注射,方便后续进行的制件结构与性能的对比性研究。在剪切振动装置设计中,采用曲柄连杆机构实现的机械振动引入到熔体流动过程中,设计特殊的振动头实现了熔体在料筒中的剪切振动,振动频率(0～15Hz)和位移振幅(0～3mm)都可方便而准确地进行调节。选择液压系统首次实现了压力振幅(0～59.4MPa)、振动频率(0～3Hz)可调的低频压力振动创新设计,文献报道的振幅都是位移振幅,本文首次采用压力振幅,实现增压和压力振动是该装置设计中的创新之处:选择贯穿料筒、喷嘴、流道和模具型腔全过程的压力振动注射成型方案,这在相关的研究中都没有过报道。
Recently the melt vibration technique, as an effective morphology control technique, is widely studied in the world. In this paper, two creatively self-made vibration injection-molding devices are applied to realize shear vibration and pressure vibration, respectively, which are used to study the relationship between vibration injection molding and rheological behavior and structure-morphology of injection moldings. Aim to industrialize the melt vibration technique, effects of low frequency melt vibration on rheology, uniaxially and biaxially mechanical properties and morphologies of conventional injection moldings (CIM) and vibration injection molding (VIM) are researched in detail. The VIM pioneers a novel method to better melt rheological behavior and to obtain self-reinforced and/or self-toughened injection moldings, and the main results are as followed.1.Research and Development of Low Frequency Vibration Injection Molding DeviceAim to realize shear vibration and pressure vibration, respectively, two vibration fields, wittily superimposed to injection molding process, and the developed technique is here called low frequency vibration injection molding. The each
vibration injection molding device can realize conventional injection molding and vibration injection molding, respectively, so the structure-properties prepared by vibration injection molding can be compared to those obtained by conventional injection molding. As for the shear vibration device, the slot-and-crank mechanism was used to realize melt shear vibration, the vibration frequency (0~15Hz) and displacement amplitude (0~3mm) can be conveniently and precisely adjusted. The hydraulic system was first used to realize melt pressure vibration, and the range of vibration frequency is from 0 to 3Hz, and range of pressure vibration amplitude is from 0 to 59.4MPa. The adoptions of pressure vibration amplitude, pressurized oil cylinder are creative designs in the pressure vibration device. The selected scheme of pressure vibration penetrating through barrel, nozzle, runner system and mold cavity is never reported in the literatures.2. Effect of Low Frequency Melt Vibration Field on Rheological Behavior of Polymer MeltThe rheological behavior was changed greatly in the shear vibration field. The average apparent viscosity decreases first with increasing vibration frequency and displacement amplitude, and when the frequency reaches about 5Hz the viscosity begins to pick up and changes in viscosity is very little, which is consistent with the research results studied by J. P. Ibar, the authority of vibration injection molding. But in his researches the effect of melt vibration on the rheological behavior was focused on amorphous polymers. In the paper the studied polymer was expanded to semi-crystalline polymer. The polymer melt temperature and the average pressure are influencing factors for the viscosity, and at lower temperature and/or lower average pressure result in greater decrease in average apparent viscosity. For HDPE a maximal decrease in average apparent viscosity induced by melt shear vibration, 53.2%, is obtained at 5.67Hz, and the corresponding value is 60.3% for PS at 4Hz.In previous studies on effect of melt vibration are mainly focused on melt shear vibration, and the amplitude is also the displacement vibration amplitude. In the paper the pulsing pressure vibration is creatively superposed to the flowing melt, and originates the study on melt properties through pressure vibration.
The pressure vibration field can improve polymer melt's Theological properties. At constant pressure vibration amplitude, the apparent viscosity decrease greatly in low ranges of vibration frequency (0~0.7Hz), and then tends to plateau. For HDPE, PP andABS, the maximal decreasing percentages are 48.9%, 82.9% and 66.7%, respectively. At a constant vibration frequency, the apparent viscosity decreases greatly with increasing pressure vibration amplitude. When the vibration amplitude is 29.7MPa, the decrease percentages are 99%, 99% and 94.3% for HDPE, PP andABS, respectively. Compared with the effects of melt shear vibration, the pressure vibration can improve the melt rheological behavior greatly.3. Structures and Properties of Dumbbel I Injection Molding Prepared via Low Frequency Vibration Injection MoldingPrepared by pressure vibration injection molding device, the self-reinforced dumbbell injection moldings, for semi-crystalline materials, are generally obtained. The tensile strength and impact strength are increase with the increasing of pressure vibration amplitude with decreased elongation at break; the tensile strength is enhanced with increasing frequency in the low range frequency, but the breaking elongation decreases, thereafter the elongation begins to pick up with increasing vibration frequency, at the same time the tensile strength is also improved. Appeal to the DSC, SEM and WAXD we pioneers study on the morphology of skin, shear layer and core, respectively.As for HDPE injection moldings, the degree of self-reinforcement in tensile strength is greatly dependent on not only the molecular weight but also the molecular weight distribution or the percentage of high molecular weight. The high molecular weight chain first forms the primary nuclei, induced by pressure vibration field, and then other chains begin to grow on the primary nuclei, the SEM photos show that row-nucleated lamella structure or shish-kebab structure exists in the vibration injection moldings. For HDPE 6100M, with lower molecular weight and bimodal molecular weight distribution, the yield strength and Young's modus increase from 39.8MPa, conventional injection molding values, to 60.6MPa, individually, and the corresponding percentages are 52.3%; for HDPE 6098,with the biggest molecular
weight, the conventional values in strength is 43.9MPa, and the enhanced value is 62.1MPa, and the corresponding percentage is 41.5%; for HD6070EA, with lowest molecular weight, the biggest yield strength for vibration injection molding is 36.1MPa against 26.5MPa, conventional value, and the corresponding percentage is 36.2%. For HDPE6100M and HDPE 6098 vibration injection moldings, the tensile strength is enhanced, but the breaking elongation decreases, and begins to pick up obtained at high vibration frequency; for HD6070EA the tensile strength is improved with improved plasticity.For PP 1300, a 17.2% increase in yield strength is obtained in vibration injected dumbbells, but we creative find that when the pressure vibration amplitude is beyond 39.6MPa, the impact strength pullups into high stage. Injected at high temperature(230 *C, 250 °C) the self-reinforced and simultaneous self-toughened vibration injected dumbbells are obtain at high vibration frequency, which breaks out the conventional ideas, which is that when the tensile strength increases the material's ductility must decrease, accepted by most polymer specialists, and the increase in ductility is due to the decreased dimensions of spherulites and percentage increase in 3 -form crystalline for polypropylene. SEM photos show that the spherulites deform and orients along the flow direction with decreased dimensions of spherulites. WAXD datas identify the Y -form crystalline induced by vibration injection molding, and the changes of 3 -form crystalline are dependent on the melt temperatures. In the low melt temperature vibration injection molding decreases the percentage of 3 -form crystalline.which is consitent with the results of SCORIM,and when the melt temperature is high the the percentage of 3 -form crystalline increases prepared at high vibration frequency and low pressure vibration amplitude, which is consitent with the facts, which is that the 3 -form crystalline generally occurs in the presence of shearing foreces.accepted by most scientists.With the application of vibration injection molding, a -phase, 3 -phase and Y -phase of isotactic polyprpylene are coexit in the moldings, but in the conventional moldings there are only a -phase, 3 -phase, and the percentages of 3 -phase and v -phase can be adjusted by controlling vibration processing variables.
Adjusting the vibration injection molding variables, the percentages of P -form and Y -form crystallines are controlled, thus the controllability of resultant properies are creatively obtained. Based on lots of experience of vibration injection molding we originally plat the a -form, 3 -form and Y -form distribution phase diagram and creatively draw a conclusions of relationship between vibration injection variables and properties, which can realize the designability of properties.The study on the fiber orientation in the vibration injection molding can visually display the effect of vibration injection field on the molecular orientation. The WAXD data realize and justify that the fiber orientation structure is favor in the presence of Y -form crystalline.The Vicat softening point temperature of specimen increase prepared at vibration injection molding, for HDPE 6100M, HDPE6098,HD6070EA, PP 1300 and FRPP, the increase in temperature are 10°C > 11.7°C-. 5°C % 8.6°C and 4.5°C, respectively.For conventional moldings, a spherulitic morphology predominates, and the core region is very big; the pressure vibration injection molding can enlarge the domain of shear layer with thinner core region, and even the core region disappears.The vibration injection molding is beneficial to obtain decreased crystalline particle, perfect crystal and increasing crystallinity, for HDPE 6100M, HDPE6098, HD6070EA and PP 1300, the increased percentages are 9.6%,7.9%,10.2% and 12.1%, respectively.4. Structures and Properties of Square Specimen Prepared via Low Frequency Vibration Injection MoldingWith application of pressure vibration injection molding, the mechanical properties in both longitudinal direction and transverse direction are reinforced, we pioneer a novel method to prepare biaxial self-reinforcement at uniaxial stress field, and such method is never reported in the literatures. In the longitudinal direction, for HDPE, PP and FRPP, the increase percentages in tensile strength are 25.8%, 17.4% and 11.8%, respectively; in the transverse direction the corresponding increase percentages are 14.3%, 9.6% and 14.9%.SEM photos identify the occurrence of interlocking shish-kebab structure which is
favor to realize biaxial self-reinforcement; the spherulites are still dominant in the isotactic polypropylene vibration square specimen, the effect of pressure vibration field results in deformation and orientation of spherulites with decreased dimensions. Such resultant morphology and the proposed morphology development model never appear in the literatures.The states of glass fibers are random distributed in the shear layer, and almost perpendicular to the flow direction in the core region, for FRPP conventional moldings; for the vibration injection molded FRPP, the combined effects of flow field and vibration force field orientates the fibers at an angle with the flow direction, and the glass fibers in the core regions prepared at low vibration frequency and high pressure vibration amplitude, are nearly at an angle of 45° with the flow direction, which results in obtaining biaxial self reinforcement in tensile strength.For PP, vibration force field is favor in occurrence of Y-form and decrease percentage of P -form, and the contents of P -form and Y -form can also be controlled by adjusting the vibration injection molding variables.When the spuare specimens injected via vibration injection molding, for the Vicatsoftening point temperature, the enhanced temperatures are 4.2 *C, 3.5 °C and 2.5 °C, for HDPE6100M, PP 1300 and FRPP, respectively, which means that the vibration injection molding results in stereo self-reinforcement, which pioneers a novel method to obtain isotropic properties.The melt peak shifts to high temperature for HDPE 6100M vibration injection molding, and the crystal are more perfect with enhanced crystallinity, e.g. in the shear layer about a 10% increase in crystallinity is obtain; for PP 1300 the enthalpy and crystallinity of vibration injected dumbbells increase, and a 11% increase in crystallinity is obtained in the core region.5. Structures and Properties of LLDPE/PP Copolymer Injection Molding Prepared via Low Frequency Vibration Injection MoldingAddition of LLDPE to PP results in improved toughness of PP, at the same time the yield strength decreases. Based on the experience to obtain self-reinforced dumbbell via vibration injection molding, the PP/LLDP copolymer was appealed to
vibration injection molding to strengthen the copolymer. With the application of vibration injection molding, the Y -form crystalline of PP is obtained. As shown in SEM photos the crystal band, also like shish kebab structure, is widely distributed in the skin-core structure of vibration injection molding, and also oriented in the flow direction. The occurrence of Y -form crystalline and the shish kebab structure and increase in crystallinity are beneficial of enhanced tensile strength, and the crystal particle dimensions are obviously decreased at low vibration frequency and high pressure vibration amplitude, and the resultant property is improved toughness.When the ratio of LLDPE/PP is 35/65, there are a 5.7% increase in tensile strength, and simultaneous a 47.4% increase in impact strength. So the addition of LLDPE improves impact strength, prepared via vibration injection molding the toughness of PP/LLDPE copolymer is enhanced again, with a little increase in the tensile strength. The Vicat softening point temperature increases 5.2 "C for LLDPE/PP (35/65) copolymer is also due to the application of vibration injection molding.From above self-reinforcement of PP/LLDPE copolymer, it is foreseeable that the melt vibration technique can widely strengthen the copolymer and the technique provides a novel new idea to obtain high performance of copolymer.In a word, with the application of vibration injection molding, the rheological property of polymer is improved with self-reinforced injection moldings, and when injected at high temperature the isotactic polypropylene is self-reinforced and self-toughened simultaneously.
1.低频振动注射成型装置的研制。
以实现低频振动注射成型技术为目的,创造性地分别设计了剪切振动和压力振动实验装置,将不同类型的振动场巧妙地与注射过程有机地结合在一起,并能分别实现常规注射和振动注射,方便后续进行的制件结构与性能的对比性研究。在剪切振动装置设计中,采用曲柄连杆机构实现的机械振动引入到熔体流动过程中,设计特殊的振动头实现了熔体在料筒中的剪切振动,振动频率(0～15Hz)和位移振幅(0～3mm)都可方便而准确地进行调节。选择液压系统首次实现了压力振幅(0～59.4MPa)、振动频率(0～3Hz)可调的低频压力振动创新设计,文献报道的振幅都是位移振幅,本文首次采用压力振幅,实现增压和压力振动是该装置设计中的创新之处:选择贯穿料筒、喷嘴、流道和模具型腔全过程的压力振动注射成型方案,这在相关的研究中都没有过报道。
Recently the melt vibration technique, as an effective morphology control technique, is widely studied in the world. In this paper, two creatively self-made vibration injection-molding devices are applied to realize shear vibration and pressure vibration, respectively, which are used to study the relationship between vibration injection molding and rheological behavior and structure-morphology of injection moldings. Aim to industrialize the melt vibration technique, effects of low frequency melt vibration on rheology, uniaxially and biaxially mechanical properties and morphologies of conventional injection moldings (CIM) and vibration injection molding (VIM) are researched in detail. The VIM pioneers a novel method to better melt rheological behavior and to obtain self-reinforced and/or self-toughened injection moldings, and the main results are as followed.1.Research and Development of Low Frequency Vibration Injection Molding DeviceAim to realize shear vibration and pressure vibration, respectively, two vibration fields, wittily superimposed to injection molding process, and the developed technique is here called low frequency vibration injection molding. The each
vibration injection molding device can realize conventional injection molding and vibration injection molding, respectively, so the structure-properties prepared by vibration injection molding can be compared to those obtained by conventional injection molding. As for the shear vibration device, the slot-and-crank mechanism was used to realize melt shear vibration, the vibration frequency (0~15Hz) and displacement amplitude (0~3mm) can be conveniently and precisely adjusted. The hydraulic system was first used to realize melt pressure vibration, and the range of vibration frequency is from 0 to 3Hz, and range of pressure vibration amplitude is from 0 to 59.4MPa. The adoptions of pressure vibration amplitude, pressurized oil cylinder are creative designs in the pressure vibration device. The selected scheme of pressure vibration penetrating through barrel, nozzle, runner system and mold cavity is never reported in the literatures.2. Effect of Low Frequency Melt Vibration Field on Rheological Behavior of Polymer MeltThe rheological behavior was changed greatly in the shear vibration field. The average apparent viscosity decreases first with increasing vibration frequency and displacement amplitude, and when the frequency reaches about 5Hz the viscosity begins to pick up and changes in viscosity is very little, which is consistent with the research results studied by J. P. Ibar, the authority of vibration injection molding. But in his researches the effect of melt vibration on the rheological behavior was focused on amorphous polymers. In the paper the studied polymer was expanded to semi-crystalline polymer. The polymer melt temperature and the average pressure are influencing factors for the viscosity, and at lower temperature and/or lower average pressure result in greater decrease in average apparent viscosity. For HDPE a maximal decrease in average apparent viscosity induced by melt shear vibration, 53.2%, is obtained at 5.67Hz, and the corresponding value is 60.3% for PS at 4Hz.In previous studies on effect of melt vibration are mainly focused on melt shear vibration, and the amplitude is also the displacement vibration amplitude. In the paper the pulsing pressure vibration is creatively superposed to the flowing melt, and originates the study on melt properties through pressure vibration.
The pressure vibration field can improve polymer melt's Theological properties. At constant pressure vibration amplitude, the apparent viscosity decrease greatly in low ranges of vibration frequency (0~0.7Hz), and then tends to plateau. For HDPE, PP andABS, the maximal decreasing percentages are 48.9%, 82.9% and 66.7%, respectively. At a constant vibration frequency, the apparent viscosity decreases greatly with increasing pressure vibration amplitude. When the vibration amplitude is 29.7MPa, the decrease percentages are 99%, 99% and 94.3% for HDPE, PP andABS, respectively. Compared with the effects of melt shear vibration, the pressure vibration can improve the melt rheological behavior greatly.3. Structures and Properties of Dumbbel I Injection Molding Prepared via Low Frequency Vibration Injection MoldingPrepared by pressure vibration injection molding device, the self-reinforced dumbbell injection moldings, for semi-crystalline materials, are generally obtained. The tensile strength and impact strength are increase with the increasing of pressure vibration amplitude with decreased elongation at break; the tensile strength is enhanced with increasing frequency in the low range frequency, but the breaking elongation decreases, thereafter the elongation begins to pick up with increasing vibration frequency, at the same time the tensile strength is also improved. Appeal to the DSC, SEM and WAXD we pioneers study on the morphology of skin, shear layer and core, respectively.As for HDPE injection moldings, the degree of self-reinforcement in tensile strength is greatly dependent on not only the molecular weight but also the molecular weight distribution or the percentage of high molecular weight. The high molecular weight chain first forms the primary nuclei, induced by pressure vibration field, and then other chains begin to grow on the primary nuclei, the SEM photos show that row-nucleated lamella structure or shish-kebab structure exists in the vibration injection moldings. For HDPE 6100M, with lower molecular weight and bimodal molecular weight distribution, the yield strength and Young's modus increase from 39.8MPa, conventional injection molding values, to 60.6MPa, individually, and the corresponding percentages are 52.3%; for HDPE 6098,with the biggest molecular
weight, the conventional values in strength is 43.9MPa, and the enhanced value is 62.1MPa, and the corresponding percentage is 41.5%; for HD6070EA, with lowest molecular weight, the biggest yield strength for vibration injection molding is 36.1MPa against 26.5MPa, conventional value, and the corresponding percentage is 36.2%. For HDPE6100M and HDPE 6098 vibration injection moldings, the tensile strength is enhanced, but the breaking elongation decreases, and begins to pick up obtained at high vibration frequency; for HD6070EA the tensile strength is improved with improved plasticity.For PP 1300, a 17.2% increase in yield strength is obtained in vibration injected dumbbells, but we creative find that when the pressure vibration amplitude is beyond 39.6MPa, the impact strength pullups into high stage. Injected at high temperature(230 *C, 250 °C) the self-reinforced and simultaneous self-toughened vibration injected dumbbells are obtain at high vibration frequency, which breaks out the conventional ideas, which is that when the tensile strength increases the material's ductility must decrease, accepted by most polymer specialists, and the increase in ductility is due to the decreased dimensions of spherulites and percentage increase in 3 -form crystalline for polypropylene. SEM photos show that the spherulites deform and orients along the flow direction with decreased dimensions of spherulites. WAXD datas identify the Y -form crystalline induced by vibration injection molding, and the changes of 3 -form crystalline are dependent on the melt temperatures. In the low melt temperature vibration injection molding decreases the percentage of 3 -form crystalline.which is consitent with the results of SCORIM,and when the melt temperature is high the the percentage of 3 -form crystalline increases prepared at high vibration frequency and low pressure vibration amplitude, which is consitent with the facts, which is that the 3 -form crystalline generally occurs in the presence of shearing foreces.accepted by most scientists.With the application of vibration injection molding, a -phase, 3 -phase and Y -phase of isotactic polyprpylene are coexit in the moldings, but in the conventional moldings there are only a -phase, 3 -phase, and the percentages of 3 -phase and v -phase can be adjusted by controlling vibration processing variables.
Adjusting the vibration injection molding variables, the percentages of P -form and Y -form crystallines are controlled, thus the controllability of resultant properies are creatively obtained. Based on lots of experience of vibration injection molding we originally plat the a -form, 3 -form and Y -form distribution phase diagram and creatively draw a conclusions of relationship between vibration injection variables and properties, which can realize the designability of properties.The study on the fiber orientation in the vibration injection molding can visually display the effect of vibration injection field on the molecular orientation. The WAXD data realize and justify that the fiber orientation structure is favor in the presence of Y -form crystalline.The Vicat softening point temperature of specimen increase prepared at vibration injection molding, for HDPE 6100M, HDPE6098,HD6070EA, PP 1300 and FRPP, the increase in temperature are 10°C > 11.7°C-. 5°C % 8.6°C and 4.5°C, respectively.For conventional moldings, a spherulitic morphology predominates, and the core region is very big; the pressure vibration injection molding can enlarge the domain of shear layer with thinner core region, and even the core region disappears.The vibration injection molding is beneficial to obtain decreased crystalline particle, perfect crystal and increasing crystallinity, for HDPE 6100M, HDPE6098, HD6070EA and PP 1300, the increased percentages are 9.6%,7.9%,10.2% and 12.1%, respectively.4. Structures and Properties of Square Specimen Prepared via Low Frequency Vibration Injection MoldingWith application of pressure vibration injection molding, the mechanical properties in both longitudinal direction and transverse direction are reinforced, we pioneer a novel method to prepare biaxial self-reinforcement at uniaxial stress field, and such method is never reported in the literatures. In the longitudinal direction, for HDPE, PP and FRPP, the increase percentages in tensile strength are 25.8%, 17.4% and 11.8%, respectively; in the transverse direction the corresponding increase percentages are 14.3%, 9.6% and 14.9%.SEM photos identify the occurrence of interlocking shish-kebab structure which is
favor to realize biaxial self-reinforcement; the spherulites are still dominant in the isotactic polypropylene vibration square specimen, the effect of pressure vibration field results in deformation and orientation of spherulites with decreased dimensions. Such resultant morphology and the proposed morphology development model never appear in the literatures.The states of glass fibers are random distributed in the shear layer, and almost perpendicular to the flow direction in the core region, for FRPP conventional moldings; for the vibration injection molded FRPP, the combined effects of flow field and vibration force field orientates the fibers at an angle with the flow direction, and the glass fibers in the core regions prepared at low vibration frequency and high pressure vibration amplitude, are nearly at an angle of 45° with the flow direction, which results in obtaining biaxial self reinforcement in tensile strength.For PP, vibration force field is favor in occurrence of Y-form and decrease percentage of P -form, and the contents of P -form and Y -form can also be controlled by adjusting the vibration injection molding variables.When the spuare specimens injected via vibration injection molding, for the Vicatsoftening point temperature, the enhanced temperatures are 4.2 *C, 3.5 °C and 2.5 °C, for HDPE6100M, PP 1300 and FRPP, respectively, which means that the vibration injection molding results in stereo self-reinforcement, which pioneers a novel method to obtain isotropic properties.The melt peak shifts to high temperature for HDPE 6100M vibration injection molding, and the crystal are more perfect with enhanced crystallinity, e.g. in the shear layer about a 10% increase in crystallinity is obtain; for PP 1300 the enthalpy and crystallinity of vibration injected dumbbells increase, and a 11% increase in crystallinity is obtained in the core region.5. Structures and Properties of LLDPE/PP Copolymer Injection Molding Prepared via Low Frequency Vibration Injection MoldingAddition of LLDPE to PP results in improved toughness of PP, at the same time the yield strength decreases. Based on the experience to obtain self-reinforced dumbbell via vibration injection molding, the PP/LLDP copolymer was appealed to
vibration injection molding to strengthen the copolymer. With the application of vibration injection molding, the Y -form crystalline of PP is obtained. As shown in SEM photos the crystal band, also like shish kebab structure, is widely distributed in the skin-core structure of vibration injection molding, and also oriented in the flow direction. The occurrence of Y -form crystalline and the shish kebab structure and increase in crystallinity are beneficial of enhanced tensile strength, and the crystal particle dimensions are obviously decreased at low vibration frequency and high pressure vibration amplitude, and the resultant property is improved toughness.When the ratio of LLDPE/PP is 35/65, there are a 5.7% increase in tensile strength, and simultaneous a 47.4% increase in impact strength. So the addition of LLDPE improves impact strength, prepared via vibration injection molding the toughness of PP/LLDPE copolymer is enhanced again, with a little increase in the tensile strength. The Vicat softening point temperature increases 5.2 "C for LLDPE/PP (35/65) copolymer is also due to the application of vibration injection molding.From above self-reinforcement of PP/LLDPE copolymer, it is foreseeable that the melt vibration technique can widely strengthen the copolymer and the technique provides a novel new idea to obtain high performance of copolymer.In a word, with the application of vibration injection molding, the rheological property of polymer is improved with self-reinforced injection moldings, and when injected at high temperature the isotactic polypropylene is self-reinforced and self-toughened simultaneously.
引文
[1] 申开智主编,塑料成型模具.北京:轻工业出版社.2002.9.
[2] Oao F. Cavity Pressure Control During the Cooling Stage in Thermoplastic Injection Molding.Polymer Engineering Science, 1996,36(2): 2467-2476.
[3] Dubay R., Bell A. C., Oupta Y. P. Control of Plastic Melt Temperature: A Multiple Input Multipe Output Model Predivtive Approach. Polymer Engineering Science, 1997, 37(9):1550-1563.
[4] Lafranchc E., Pabiot .T. Temperaure-Dependent Influence of Molecular Orientation and Internal Stresses on the Injecton-Molded Polypropylene Pazts. J. Appl. Polym. Sci., 1998, 68(10):1661-1669.
[5] Ibar J. P. RHEOMOLDING: A New Processs To Mold Polymeric Materials, Polym-Plast. Technol. Eng., 1981,17(1): 11-44.
[6] Kazmer D., Barkan P., Multi-Cavity Pressure Control in the Filling and Packing of the Injection Molding Process. Polymer Engineering Science, 1997,37(11): 1865-1879.
[7] Kazmer D., Barkan P., The Process Capability of Multi-Cavity Pressure Control for the Injection Molding Process. Polymer Engineering Science, 1997,37(11): 1880-1895.
[8] Pornnimit B., Ehrenstein G.W., Kunstsoffe German Plastics, 1989, 79 (7): 631.
[9] Staudinger H., Die Hochmolekularen Organischen Verbin-dungen, Springer, Berllin, 1932
[10] SoutherJ.H., Porter R.S., J.Macromol. Sci. Phys., 1970, B4:541
[11] Zwijnenbung A., Pennings A., Colloid & Polym. Sci. 1976, 254.. 868
[12] Capaccio G., Ward I.M. Preparation of Ultra-high Modulus Linear Polyethylene; Effect of Molecular Weight and Molecular Weight Ddistribution on Drawing Behavior and Mechanical Properties, Polymer, 1974, 15:233
[13] Ibar J.P. Control of polymer properties by melt vibration technology: A review, Polym. Eng. Sci., 1998, 38(1): 1
[14] Cox W.P., Merz E.H.. Journal of Polymer Science, 1958, 28:619
[15] Oski K., Kurata M.M., et al. J. Phsy. Chem., 1963, 12:339
[16] Oski IC, Kurata M.M., et ai. J. Phsy. Chem., 1965, 69 (12): 4183
[17] Laufer Z., Staveman H.L, Time dependence of shear and normal stresses of polystyrene and poly(ethylene oxide) solutions, Journal of Polymer Science, Polymer Chemistry Edition,1973,11(11):3005-3015
[18] Kazakia J.Y., Rivlin R.S. The influence of vibration on Poiseuille flow of a non-Newtonian fluid. I, Rheologyica. Acta., 1978, 17(3):210.
[19] Kazakia J.Y., Rivlin R.S. The effect of longitudinal vibration of Poiseuille flow in a non-circular pipe, Journal Of Non-Newtonnian Fluid Mechanics, 1979, 6(2): 145-154
[20] Fridman M.L.,Peshkovsky, S. L. Vinogradov, G.V. Rheology of thermoplastics under conditions of spiral flow and vibrations on extrusion, Polymer Engineering And Science, 1981,21(12):755
[21] Mena B., Manero O., Klason C., Kubat J., Proc. Viith. Int. Congress On Rheology,Gothenburg, Sweden, 1976:408
[22] Isayev A.I., Wong, C.M. Parallel superposition of small- and large-amplitude oscillations upon steady shear flow of polymer fluids Journal of Polymer Science, Part B: Polymer Physic,1988, 26(11): 2303-2330.
[23] Wong, C.M., Isayev A.I. Orthogonal superposition of small and large amplitude oscillations upon steady shear flow of polymer fluids, Rheologica Acta. 1989, 28(2): 176.
[24] Giacomin A.J., Constitutive theory for polyolefins in large amplitude oscillatory shear,Polymer Engineering And Science, 1995, 35(9): 768-777.
[25] Buyevich, Yu.a., Leonov A.I., Safrai, V.M. Variations in filtration velocity due to random large-scale fluctuations of porosity, Journal of Fluid Mechanics,1969,37:371.
[26] Gorodtsov, V.A., Leonov A.I. Role of the scalar structure parameter in the description of the theological behavior of elastico-viscous liquids, Mekhnika Kompozitnykh Materialov, 1969,5(6):1087.
[27] Chong J.S., Vezzi D.M. Unsteady flow of viscoelastic fluids, J. AppI.Polym.Sci, 1970,14(1):17
[28] Mishra S.P., Misra, K.C. o-elastic flow due to a plate which starts oscillating in the presence of a parallel stationary plate, Rheologica Acta, 1982,21(1): 25
[29] Ramkissoon, H., Easwaran C.V., Majumdar, S.R. International Journal of Non-Linear Mechanics, 1989,24(6): 585
[30] 王喜顺,彭玉成.注射成型中模腔内振动剪切流动的理论模型。中国塑料,1999,13(6)
[31] 王喜顺,彭玉成.振动注射成型中模腔冷却过程的研究.中国塑料,1999,13(8):75
[32] Thomas V., Oiacomin, A.J., Wolfenden, A. Measuring the viscoelastic properties of an ethylene-tetrafluoroethylene copolymer at ultrasonic frequencies, Polym. Eng. Sci., 1995,35(12):1053
[33] 王克俭,周持兴.碳酸钙填充聚丙烯振动剪切行为的流变模型.上海交通大学学报,2000,34(11):1535
[34] B.B.拉普申著,林师沛译.热塑性塑料注射原理.北京:轻工业出版社.1998:178
[35] M.D.贝贾尔编,贾德民 姚钟尧等译.塑料聚合物科学与工艺学.上册.第一版.广州:华南理工大学出版社,1991
[36] Ibar J.P., Improving molding through melt-flow oscillation. Modem Plastics International, 1995, 25(1): 72
[37] Allan P.S., Bevis M.J. MULTIPLE LIVE-FEED INJECTION MOULDING. Plastics and Rubber Processing and Applications, 1987, 7 (1) : 3-10
[38] 瞿金平,吴宏武,振动场强化聚合物塑化注射成型技术.塑料,2000,6(29):9
[39] 彭响方,瞿金平等,动态注射成型过程中的振动技术研究.工程塑料应用.1999,27(7):38
[40] 瞿金平,振动力场下聚合物塑化挤出技术研究.工程塑料应用,2000,28(11):11
[41] Ibar J. P., RHEOMOLDING: A New Process To Mold Polymeric Materials Polym-Plast. Technoi. Eng., 1981,17(1):11-44.
[42] Ibar J. P., U.S.Patent, 5,605,707(1997)
[43] Ibar J.P., Control of polymer properties by melt vibration technology: A review. Polym Eng Sci 38:1-20(1998)
[44] Minardi, A., Boudeulle, M., Duval, E., Etienne, S. Effect of the moulding conditions on the semicrystalline structure of polypropylene .Polymer, 1997, 38(15):3957-3965
[45] Ogbonna, C.I.; Kalay, G.; Allan, P.S.; Bevis, M.J. Self-reinforcement of polyolefins produced by shear controlled orientation in injection molding. Journal of Applied Polymer Science 1995, 58(11), 2131-2135.
[46] Allan, P. S., Bevis, M. J. MULTIPLE LIVE-FEED INJECTION MOULDING. Plastics and Rubber Processing and Applications, 1987,7(1): 3-10.
[47] Allan P. S., et al. Method for Molding A Material. U.S. Patent 5,160,466, 1992-11-3
[48] Allan, P.S.; Bevis, M . J. Br Pat 1995; 2174-140-B.
[49] Allan P.S., Bevis M.J., Composites Manufacturing, 1990,1:79
[50] Kalay G., Allan P.S., Bevis M.J., A phase in injection moulded isotactic polypropylene, Polymer, 1994,35,2480
[51) Kalay G., Allan P., Bevis M.J., in Proc. of The International Polypropylene Conference, The Institute of Materials, London, 24-25 October 1994, pp. 109
[52] Kalay G., Allan P.S., Bevis M.J., Plastics, Rubber Compos. Process. Applicat., 1995,23,71.
[53] Ogbonna C.I., Kalay G., Allan P., Bevis MJ., The self-reinforcement of polyolefins produced by shear controlled orientation in injection molding, J. Appl. Polym. Sci., 1995, 58, 2131
[54] Kalay G., Ogbonna C, Allan P.S., Bevis M.J., The management of microstructure in semicrystalline polymers, Trans. IchemE., Part A, 1995,73,798
[55] Kalay G., Zhong Z., Allan P., Bevis M.J., The occurrence of the A-phase in injection moulded polypropylene in relation to the processing conditions, Polymer, 1996,37,2077
[56] Kalay G., Allan P.S., Bevis M.J., Shear controlled orientation, Kunststoffe, 1997, 87. 768
[57] Kalay G., Bevis M.J., J. Polym. Sci. Part B: Polym. Phys., Processing and physical property relationships in injection-molded isotactic polypropylene. 1. mechanical properties, 1997,35, 241
[58] Kalay G., Bevis M.J., J. Polym. Sci. Part B: Polym. Phys., Processing and physical property relationships in injection-molded isotactic polypropylene. 2. morphology and crystallinity, 1997, 35,265
[59] Kalay G., Bevis M.J., J. Polym. Sci. Part B: Polym. Phys., The effect of shear controlled orientation in injection moulding on the mechanical properties of an aliphatic polyketone, 1997, 35,415
[60] Kalay G., Sousa R.A., Reis T.R., Cunha A.M., Bevis M.J., The enhancement of the mechanical properties of a high-density polyethylene, J. Appl. Polym. Sci., 1999, 73,2473
[61] Reis R.L., Cunha A.M., Oliveira M.J., Campos A.R., Bevis M.J., Relationship between processing and mechanical properties of injection molded high molecular mass polyethylene plus hydroxyapatite composites, Mat. Res. Innovat., 2001,4,263
[62] Kalay G., Kalay C.R., J. Polym. Sci. Part B: Polym. Phys., Interlocking shish-kebab
morphology in polybutene-1, 2002, 40, 1828
[63] Sousa R.A., Reis R.L., Cunha A.M., Bevis M.J., Structure development and inteffacial interactions in high-density polyethylene/hydroxyapatite (HDPE/HA) composites molded with preferred orientation, J. Appl. Polym. Sci., 2002, 86, 2873
[64] Kalay G., Kalay C.R., Compounding and injection molding of polybutene-1/polypropylene blends, J. Appl. Polym. Sci., 2003, 88, 806
[65] Wang, L., Allan, P.S., M.J. Bevis, et al. Enhancement of internal weld line strength in thermotropic liquid crystal polymer mouldings, Plast. Ruhb. Proc. Appl., 1995, 23(3): 139
[66] Sousa, R. A.; Reis, R. L.; Cunha, A. M.; Bevis, M. J. Structural development of HDPE in injection molding, J Appl Polym Sci 2003, 89(8): 2079-2087.
[67] Ogbonna, C. I.; Kalay, G.; Allan, P. S.; Bevis, M. J. Self-reinforcement of polyolefins produced by shear controlled orientation in injection molding,J Appi Polym Sci 1995, 58,2131-2135.
[68] 官青,申开智,朱居木,张弓,吉继亮.动态应力场中成型的自增强聚丙烯的结构与性能,高分子学报.1996,n3:378-381.
[69] 官青,申开智.常压动态保压注塑自增强高密度聚乙烯的结构与性能.高等学校化学学报,1995,16(7):1129-1133.
[70] 官青,申开智.动态保压注射成型技术研究.成都科技大学学报,1995(5):20-26.
[71] 官青,申开智.低压动态保压注射模塑ABS的自增强.工程塑料应用,1995,23(1):12-15
[72] Guan Qing, Shen Kaizhi Ji, Jiliang, Zhu Jumu. Structure and properties of self-reinforced polyethylene prepared by oscillating packing injection molding under low pressure Journal of Applied Polymer Science, 1995, v 55, n 13:1797-1804.
[73] Guan Qing, Zhu Xiaoguang, Chiu Dan, Shen, Kaizhi, Lai, F.S., McCarthy S.P. Self-reinforcement of polypropylene by oscillating packing injection molding under low pressure Journal of Applied Polymer Science, 1996,v 62, n 5: 755-762.
[74] Guan Qing, Lai F.S., McCarthy S.P., Chiu D., Zhu Xiaoguang, Shen Kaizi. Morphology and properties of self-reinforced high density polyethylene in oscillating stress field. Polymer, 1997, v 38, n 20: 5251-5253.
[75] 官青.动态保压注射成型技术研究.成都科技大学博士学位论文,1994
[76] Odell J. A., Grubb D. T., Keller A. High Modulus through Lamellar Structures Nucleated by Flow Induced Fibrous Substrates. Polymer Engineering and Science, 1978,v 19, n 6: 433-435.
[77] Odell J. A., Grubb D. T., Keller A.New Route to High Modulus Polyethylene by Lamellar Structures Nucleated onto Fibrous Substrates with General Implications for Crystallization Behavior. Polymer, 1978, v 19, n 6: 617-626.
[78] 姜朝东,申开智,方八军.在单方向往复低剪切力场中生成双向自增强HDPE试样的研究——(Ⅰ)试样制备及工艺条件对力学性能的影响.塑料工业,1998,26(1):81-85.
[79] 姜朝东,申开智,方八军.在单方向往复低剪切力场中生成双向自增强HDPE试样的研究——(Ⅱ)试样聚集态结构分析.塑料工业,1998,26(4):99-102.
[80] 姜朝东,李效玉,张权,申开智,方八军.双向自增强高密度聚乙烯结晶形态的透射电镜研究.北京化工大学学报:自然科学版,2001,28(3):78-80.
[81] Lei Jun, Jiang Chaodong, Shen Kaizhi. Biaxially self-reinforced high-density polyethylene prepared by dynamic packing injection molding. Ⅰ. Processing parameters and mechanical properties. Journal of Applied Polymer Science, 2004,v 93, n 4:1584-1590.
[82] Lei Jun, Jiang Chaodong, Shen Kaizhi. Biaxially self-reinforced high-density polyethylene prepared by dynamic packing injection molding. Ⅱ. Microstructure investigation. Journal of Applied Polymer Science, 2004, v 93, n 4:1591-1596.
[83] Chen, Li-Min, Shen, Kaizhi. Biaxial self-reinforcement of isotactic polypropylene prepared in aniaxial oscillating stress field by injection molding. Ⅰ. Processing conditions and mechanical properties .Journal of Applied Polymer Science, 2000,v 78, n 11: 1906-1910.
[84] 陈利民,申开智.注塑双向自增强聚丙烯的力学性能与形态.高分子材料科学与工程,1999,15(4):87-89.
[85] Chen, Li-Min, Shen, Kaizhi. Biaxial self-reinforcement of isotactic polypropylene prepared in uniaxial oscillating stress field by injection molding. Ⅱ. Morphology. Journal of Applied Polymer Science, 2000, v 78, n 11:1911-1917.
[86] Yong Wang, Bing Na, Qiang Fu, Yongfeng Men, Shear induced shish-kebab structure in PP and its blends with LLDPE, Polymer, 2004, 45, 207-215
[87] Yong Wang, Qin Zhang, Bing Na, Rongni Du, Kaizhi Shen and Qiang Fu, Dependence of Impact Strength on The Fracture Propagation Direction in Dynamic Packing Injection Molded PP/EPDM Blends, Polymer, 2003, 44:4261-4271
[88] Yong Wang, Bing Na and Qiang Fu, Super Polyolefin Blends Achieved via Dynamic Packing Injection Molding:Morphology and Properties, Chinese J. Polym. Sci., 2003, 5, 271
[89] Bing Na, Oin Zhang, Yong Wang, Rongni Du, Qiang Fu, Three-dimensional phase morphologies in HDPE/EVA blends obtained via dynamic injection packing molding, Polymer, 2003, 44, 5737-5747
[90] Yong Wang, Qin Zhang and Qiang Fu, Compatibiliztion of Immiscible Poly(propylene)fPolystyrene Blends Using Clay, Macromol. Rapid Commun., 2003, 24, 231-235
[91] Yong Wang, Yan Xiao, Qin Zhang, Xiao-Ling Gao and Qiang Fu, The Morphology and Mechanical Properties of Dynamic Packing Injection Molded PP/PS Blends, Polymer, 2003, 44(5) :1469-1480
[92] Yong Wang, Hao Zou, Qiang Fu, Gong Zhang, Kaizhi Shen and Rail Thomann, Shear-Induced Morphological Change in PP/LLDPE Blend, Macromol. Rapid Commun, 2002,23, 749-752
[93] Yong Wang, Qiang Fu, Qi-Jun Li, Gong Zhang, Kai-Zhi Shen and Yu-Zhong Wang, Ductile-Brittle-Transition Phenomenon in Polypropylene/Ethylene-Propylene-Diene Rubber Blends Obtained by Dynamic Packing Injection Molding: A New Understanding of the Rubber-Toughening Mechanism, J. Polym. Sci. Part B, 2002, 40, 2086-2097
[94] Yong Wang, Hao Zou, Qiang Fu, Gong Zhang and Kai-Zhi Shen, Super polyolefin blends achieved via dynamic packing injection molding: Tensile strength, Journal of Applied Polymer Science, 2002, 85 (2) : 236-243.
[95] Gong Zhang, Qiang Fu, Kai-Zhi Shen, Long Jian and Yong Wang, Studies on Blends of High-Density Polyethylene and Polypropylene Produced byOscillating Shear Stress Field, J. Appl. Polym. Sci., 2002, 86, 58-63Polyolefin Blends Achieved Via Dynamic Packing Injection Molding: TensileStrength, J. Appl. Polym. Sci., 2002, 85,236-243
[96] 张弓,傅强,申开智,等.高强超韧高密度聚乙烯/聚丙烯共混物性能与微相分离结构的研究.高分子学报,2000,10(3):306
[97] 张弓,蒋龙,申开智,等.HDPE/LDPE在动态保压注射成型中的自增强行为研究.塑料工业,1999,27(4):16
[98] 张弓,傅强,申开智,蒋龙.HDPE/PP共混物在振动剪切作用下的力学性能与形态控制.高等学校化学学报,2000,21(4):633-636.
[99] 张弓,蒋龙,申开智,官青.在低压动态注射过程中LDPE对HDPE自增强的增韧改性.1998,12(4):27-32.
[100] Zhang, Gong; Jiang, Long; Shen, Kaizhi; Guan, Qing. Self-reinforcement of high-density polyethylene/low-density polyethylene prepared by oscillating packing injection molding under low pressure. Journal of Applied Polymer Science, 1999, 71 (5) : 799.
[101] H.Becker, G Fischer, U. Mulle. Push-pull injection moulding of industrial products. Kunststeffe German Plastics, 1993, 81(3): 3.
[102] W.Michacli, et al. SeE. ANTEC. Tech.. Papers, 1993, 39:534
[103] Anon. Plastics World, 1991, 2:40
[104] Gardner G. P., Malloy R. A. Use of The Moving Boundary Molding Technque to Straighten Weld Lines. in ANTEC'96. 1996: Society of Plastics Engineerings.
[105] Gardner G. P., Malloy R. A. Appratus for Strengthening Weldlines In Molded Parts.1996:U.S. Patent No. 5,538,413.
[106] Cao B., et al. Injection-Spin Process. In ANTEC'94. 1994: Society of Plastics Engineers.
[107] Zachariades, Anagnostis E., Chung, Bin. New polymer processing technologies for engineering the physical and mechanical properties of polymer products, Adv. Polym. Technol.,1987, 7(4): 397
[108] A.E.Zachariades. Super strong polymers in planar directions, Polymer Engineer and Science, 1983,23(5): 266
[109] J.P.lbar. Vibrated gas-ass/st molding: Its benefits in injection molding, Plastics Engineering, September 1999,55(9): 51
[2] Oao F. Cavity Pressure Control During the Cooling Stage in Thermoplastic Injection Molding.Polymer Engineering Science, 1996,36(2): 2467-2476.
[3] Dubay R., Bell A. C., Oupta Y. P. Control of Plastic Melt Temperature: A Multiple Input Multipe Output Model Predivtive Approach. Polymer Engineering Science, 1997, 37(9):1550-1563.
[4] Lafranchc E., Pabiot .T. Temperaure-Dependent Influence of Molecular Orientation and Internal Stresses on the Injecton-Molded Polypropylene Pazts. J. Appl. Polym. Sci., 1998, 68(10):1661-1669.
[5] Ibar J. P. RHEOMOLDING: A New Processs To Mold Polymeric Materials, Polym-Plast. Technol. Eng., 1981,17(1): 11-44.
[6] Kazmer D., Barkan P., Multi-Cavity Pressure Control in the Filling and Packing of the Injection Molding Process. Polymer Engineering Science, 1997,37(11): 1865-1879.
[7] Kazmer D., Barkan P., The Process Capability of Multi-Cavity Pressure Control for the Injection Molding Process. Polymer Engineering Science, 1997,37(11): 1880-1895.
[8] Pornnimit B., Ehrenstein G.W., Kunstsoffe German Plastics, 1989, 79 (7): 631.
[9] Staudinger H., Die Hochmolekularen Organischen Verbin-dungen, Springer, Berllin, 1932
[10] SoutherJ.H., Porter R.S., J.Macromol. Sci. Phys., 1970, B4:541
[11] Zwijnenbung A., Pennings A., Colloid & Polym. Sci. 1976, 254.. 868
[12] Capaccio G., Ward I.M. Preparation of Ultra-high Modulus Linear Polyethylene; Effect of Molecular Weight and Molecular Weight Ddistribution on Drawing Behavior and Mechanical Properties, Polymer, 1974, 15:233
[13] Ibar J.P. Control of polymer properties by melt vibration technology: A review, Polym. Eng. Sci., 1998, 38(1): 1
[14] Cox W.P., Merz E.H.. Journal of Polymer Science, 1958, 28:619
[15] Oski K., Kurata M.M., et al. J. Phsy. Chem., 1963, 12:339
[16] Oski IC, Kurata M.M., et ai. J. Phsy. Chem., 1965, 69 (12): 4183
[17] Laufer Z., Staveman H.L, Time dependence of shear and normal stresses of polystyrene and poly(ethylene oxide) solutions, Journal of Polymer Science, Polymer Chemistry Edition,1973,11(11):3005-3015
[18] Kazakia J.Y., Rivlin R.S. The influence of vibration on Poiseuille flow of a non-Newtonian fluid. I, Rheologyica. Acta., 1978, 17(3):210.
[19] Kazakia J.Y., Rivlin R.S. The effect of longitudinal vibration of Poiseuille flow in a non-circular pipe, Journal Of Non-Newtonnian Fluid Mechanics, 1979, 6(2): 145-154
[20] Fridman M.L.,Peshkovsky, S. L. Vinogradov, G.V. Rheology of thermoplastics under conditions of spiral flow and vibrations on extrusion, Polymer Engineering And Science, 1981,21(12):755
[21] Mena B., Manero O., Klason C., Kubat J., Proc. Viith. Int. Congress On Rheology,Gothenburg, Sweden, 1976:408
[22] Isayev A.I., Wong, C.M. Parallel superposition of small- and large-amplitude oscillations upon steady shear flow of polymer fluids Journal of Polymer Science, Part B: Polymer Physic,1988, 26(11): 2303-2330.
[23] Wong, C.M., Isayev A.I. Orthogonal superposition of small and large amplitude oscillations upon steady shear flow of polymer fluids, Rheologica Acta. 1989, 28(2): 176.
[24] Giacomin A.J., Constitutive theory for polyolefins in large amplitude oscillatory shear,Polymer Engineering And Science, 1995, 35(9): 768-777.
[25] Buyevich, Yu.a., Leonov A.I., Safrai, V.M. Variations in filtration velocity due to random large-scale fluctuations of porosity, Journal of Fluid Mechanics,1969,37:371.
[26] Gorodtsov, V.A., Leonov A.I. Role of the scalar structure parameter in the description of the theological behavior of elastico-viscous liquids, Mekhnika Kompozitnykh Materialov, 1969,5(6):1087.
[27] Chong J.S., Vezzi D.M. Unsteady flow of viscoelastic fluids, J. AppI.Polym.Sci, 1970,14(1):17
[28] Mishra S.P., Misra, K.C. o-elastic flow due to a plate which starts oscillating in the presence of a parallel stationary plate, Rheologica Acta, 1982,21(1): 25
[29] Ramkissoon, H., Easwaran C.V., Majumdar, S.R. International Journal of Non-Linear Mechanics, 1989,24(6): 585
[30] 王喜顺,彭玉成.注射成型中模腔内振动剪切流动的理论模型。中国塑料,1999,13(6)
[31] 王喜顺,彭玉成.振动注射成型中模腔冷却过程的研究.中国塑料,1999,13(8):75
[32] Thomas V., Oiacomin, A.J., Wolfenden, A. Measuring the viscoelastic properties of an ethylene-tetrafluoroethylene copolymer at ultrasonic frequencies, Polym. Eng. Sci., 1995,35(12):1053
[33] 王克俭,周持兴.碳酸钙填充聚丙烯振动剪切行为的流变模型.上海交通大学学报,2000,34(11):1535
[34] B.B.拉普申著,林师沛译.热塑性塑料注射原理.北京:轻工业出版社.1998:178
[35] M.D.贝贾尔编,贾德民 姚钟尧等译.塑料聚合物科学与工艺学.上册.第一版.广州:华南理工大学出版社,1991
[36] Ibar J.P., Improving molding through melt-flow oscillation. Modem Plastics International, 1995, 25(1): 72
[37] Allan P.S., Bevis M.J. MULTIPLE LIVE-FEED INJECTION MOULDING. Plastics and Rubber Processing and Applications, 1987, 7 (1) : 3-10
[38] 瞿金平,吴宏武,振动场强化聚合物塑化注射成型技术.塑料,2000,6(29):9
[39] 彭响方,瞿金平等,动态注射成型过程中的振动技术研究.工程塑料应用.1999,27(7):38
[40] 瞿金平,振动力场下聚合物塑化挤出技术研究.工程塑料应用,2000,28(11):11
[41] Ibar J. P., RHEOMOLDING: A New Process To Mold Polymeric Materials Polym-Plast. Technoi. Eng., 1981,17(1):11-44.
[42] Ibar J. P., U.S.Patent, 5,605,707(1997)
[43] Ibar J.P., Control of polymer properties by melt vibration technology: A review. Polym Eng Sci 38:1-20(1998)
[44] Minardi, A., Boudeulle, M., Duval, E., Etienne, S. Effect of the moulding conditions on the semicrystalline structure of polypropylene .Polymer, 1997, 38(15):3957-3965
[45] Ogbonna, C.I.; Kalay, G.; Allan, P.S.; Bevis, M.J. Self-reinforcement of polyolefins produced by shear controlled orientation in injection molding. Journal of Applied Polymer Science 1995, 58(11), 2131-2135.
[46] Allan, P. S., Bevis, M. J. MULTIPLE LIVE-FEED INJECTION MOULDING. Plastics and Rubber Processing and Applications, 1987,7(1): 3-10.
[47] Allan P. S., et al. Method for Molding A Material. U.S. Patent 5,160,466, 1992-11-3
[48] Allan, P.S.; Bevis, M . J. Br Pat 1995; 2174-140-B.
[49] Allan P.S., Bevis M.J., Composites Manufacturing, 1990,1:79
[50] Kalay G., Allan P.S., Bevis M.J., A phase in injection moulded isotactic polypropylene, Polymer, 1994,35,2480
[51) Kalay G., Allan P., Bevis M.J., in Proc. of The International Polypropylene Conference, The Institute of Materials, London, 24-25 October 1994, pp. 109
[52] Kalay G., Allan P.S., Bevis M.J., Plastics, Rubber Compos. Process. Applicat., 1995,23,71.
[53] Ogbonna C.I., Kalay G., Allan P., Bevis MJ., The self-reinforcement of polyolefins produced by shear controlled orientation in injection molding, J. Appl. Polym. Sci., 1995, 58, 2131
[54] Kalay G., Ogbonna C, Allan P.S., Bevis M.J., The management of microstructure in semicrystalline polymers, Trans. IchemE., Part A, 1995,73,798
[55] Kalay G., Zhong Z., Allan P., Bevis M.J., The occurrence of the A-phase in injection moulded polypropylene in relation to the processing conditions, Polymer, 1996,37,2077
[56] Kalay G., Allan P.S., Bevis M.J., Shear controlled orientation, Kunststoffe, 1997, 87. 768
[57] Kalay G., Bevis M.J., J. Polym. Sci. Part B: Polym. Phys., Processing and physical property relationships in injection-molded isotactic polypropylene. 1. mechanical properties, 1997,35, 241
[58] Kalay G., Bevis M.J., J. Polym. Sci. Part B: Polym. Phys., Processing and physical property relationships in injection-molded isotactic polypropylene. 2. morphology and crystallinity, 1997, 35,265
[59] Kalay G., Bevis M.J., J. Polym. Sci. Part B: Polym. Phys., The effect of shear controlled orientation in injection moulding on the mechanical properties of an aliphatic polyketone, 1997, 35,415
[60] Kalay G., Sousa R.A., Reis T.R., Cunha A.M., Bevis M.J., The enhancement of the mechanical properties of a high-density polyethylene, J. Appl. Polym. Sci., 1999, 73,2473
[61] Reis R.L., Cunha A.M., Oliveira M.J., Campos A.R., Bevis M.J., Relationship between processing and mechanical properties of injection molded high molecular mass polyethylene plus hydroxyapatite composites, Mat. Res. Innovat., 2001,4,263
[62] Kalay G., Kalay C.R., J. Polym. Sci. Part B: Polym. Phys., Interlocking shish-kebab
morphology in polybutene-1, 2002, 40, 1828
[63] Sousa R.A., Reis R.L., Cunha A.M., Bevis M.J., Structure development and inteffacial interactions in high-density polyethylene/hydroxyapatite (HDPE/HA) composites molded with preferred orientation, J. Appl. Polym. Sci., 2002, 86, 2873
[64] Kalay G., Kalay C.R., Compounding and injection molding of polybutene-1/polypropylene blends, J. Appl. Polym. Sci., 2003, 88, 806
[65] Wang, L., Allan, P.S., M.J. Bevis, et al. Enhancement of internal weld line strength in thermotropic liquid crystal polymer mouldings, Plast. Ruhb. Proc. Appl., 1995, 23(3): 139
[66] Sousa, R. A.; Reis, R. L.; Cunha, A. M.; Bevis, M. J. Structural development of HDPE in injection molding, J Appl Polym Sci 2003, 89(8): 2079-2087.
[67] Ogbonna, C. I.; Kalay, G.; Allan, P. S.; Bevis, M. J. Self-reinforcement of polyolefins produced by shear controlled orientation in injection molding,J Appi Polym Sci 1995, 58,2131-2135.
[68] 官青,申开智,朱居木,张弓,吉继亮.动态应力场中成型的自增强聚丙烯的结构与性能,高分子学报.1996,n3:378-381.
[69] 官青,申开智.常压动态保压注塑自增强高密度聚乙烯的结构与性能.高等学校化学学报,1995,16(7):1129-1133.
[70] 官青,申开智.动态保压注射成型技术研究.成都科技大学学报,1995(5):20-26.
[71] 官青,申开智.低压动态保压注射模塑ABS的自增强.工程塑料应用,1995,23(1):12-15
[72] Guan Qing, Shen Kaizhi Ji, Jiliang, Zhu Jumu. Structure and properties of self-reinforced polyethylene prepared by oscillating packing injection molding under low pressure Journal of Applied Polymer Science, 1995, v 55, n 13:1797-1804.
[73] Guan Qing, Zhu Xiaoguang, Chiu Dan, Shen, Kaizhi, Lai, F.S., McCarthy S.P. Self-reinforcement of polypropylene by oscillating packing injection molding under low pressure Journal of Applied Polymer Science, 1996,v 62, n 5: 755-762.
[74] Guan Qing, Lai F.S., McCarthy S.P., Chiu D., Zhu Xiaoguang, Shen Kaizi. Morphology and properties of self-reinforced high density polyethylene in oscillating stress field. Polymer, 1997, v 38, n 20: 5251-5253.
[75] 官青.动态保压注射成型技术研究.成都科技大学博士学位论文,1994
[76] Odell J. A., Grubb D. T., Keller A. High Modulus through Lamellar Structures Nucleated by Flow Induced Fibrous Substrates. Polymer Engineering and Science, 1978,v 19, n 6: 433-435.
[77] Odell J. A., Grubb D. T., Keller A.New Route to High Modulus Polyethylene by Lamellar Structures Nucleated onto Fibrous Substrates with General Implications for Crystallization Behavior. Polymer, 1978, v 19, n 6: 617-626.
[78] 姜朝东,申开智,方八军.在单方向往复低剪切力场中生成双向自增强HDPE试样的研究——(Ⅰ)试样制备及工艺条件对力学性能的影响.塑料工业,1998,26(1):81-85.
[79] 姜朝东,申开智,方八军.在单方向往复低剪切力场中生成双向自增强HDPE试样的研究——(Ⅱ)试样聚集态结构分析.塑料工业,1998,26(4):99-102.
[80] 姜朝东,李效玉,张权,申开智,方八军.双向自增强高密度聚乙烯结晶形态的透射电镜研究.北京化工大学学报:自然科学版,2001,28(3):78-80.
[81] Lei Jun, Jiang Chaodong, Shen Kaizhi. Biaxially self-reinforced high-density polyethylene prepared by dynamic packing injection molding. Ⅰ. Processing parameters and mechanical properties. Journal of Applied Polymer Science, 2004,v 93, n 4:1584-1590.
[82] Lei Jun, Jiang Chaodong, Shen Kaizhi. Biaxially self-reinforced high-density polyethylene prepared by dynamic packing injection molding. Ⅱ. Microstructure investigation. Journal of Applied Polymer Science, 2004, v 93, n 4:1591-1596.
[83] Chen, Li-Min, Shen, Kaizhi. Biaxial self-reinforcement of isotactic polypropylene prepared in aniaxial oscillating stress field by injection molding. Ⅰ. Processing conditions and mechanical properties .Journal of Applied Polymer Science, 2000,v 78, n 11: 1906-1910.
[84] 陈利民,申开智.注塑双向自增强聚丙烯的力学性能与形态.高分子材料科学与工程,1999,15(4):87-89.
[85] Chen, Li-Min, Shen, Kaizhi. Biaxial self-reinforcement of isotactic polypropylene prepared in uniaxial oscillating stress field by injection molding. Ⅱ. Morphology. Journal of Applied Polymer Science, 2000, v 78, n 11:1911-1917.
[86] Yong Wang, Bing Na, Qiang Fu, Yongfeng Men, Shear induced shish-kebab structure in PP and its blends with LLDPE, Polymer, 2004, 45, 207-215
[87] Yong Wang, Qin Zhang, Bing Na, Rongni Du, Kaizhi Shen and Qiang Fu, Dependence of Impact Strength on The Fracture Propagation Direction in Dynamic Packing Injection Molded PP/EPDM Blends, Polymer, 2003, 44:4261-4271
[88] Yong Wang, Bing Na and Qiang Fu, Super Polyolefin Blends Achieved via Dynamic Packing Injection Molding:Morphology and Properties, Chinese J. Polym. Sci., 2003, 5, 271
[89] Bing Na, Oin Zhang, Yong Wang, Rongni Du, Qiang Fu, Three-dimensional phase morphologies in HDPE/EVA blends obtained via dynamic injection packing molding, Polymer, 2003, 44, 5737-5747
[90] Yong Wang, Qin Zhang and Qiang Fu, Compatibiliztion of Immiscible Poly(propylene)fPolystyrene Blends Using Clay, Macromol. Rapid Commun., 2003, 24, 231-235
[91] Yong Wang, Yan Xiao, Qin Zhang, Xiao-Ling Gao and Qiang Fu, The Morphology and Mechanical Properties of Dynamic Packing Injection Molded PP/PS Blends, Polymer, 2003, 44(5) :1469-1480
[92] Yong Wang, Hao Zou, Qiang Fu, Gong Zhang, Kaizhi Shen and Rail Thomann, Shear-Induced Morphological Change in PP/LLDPE Blend, Macromol. Rapid Commun, 2002,23, 749-752
[93] Yong Wang, Qiang Fu, Qi-Jun Li, Gong Zhang, Kai-Zhi Shen and Yu-Zhong Wang, Ductile-Brittle-Transition Phenomenon in Polypropylene/Ethylene-Propylene-Diene Rubber Blends Obtained by Dynamic Packing Injection Molding: A New Understanding of the Rubber-Toughening Mechanism, J. Polym. Sci. Part B, 2002, 40, 2086-2097
[94] Yong Wang, Hao Zou, Qiang Fu, Gong Zhang and Kai-Zhi Shen, Super polyolefin blends achieved via dynamic packing injection molding: Tensile strength, Journal of Applied Polymer Science, 2002, 85 (2) : 236-243.
[95] Gong Zhang, Qiang Fu, Kai-Zhi Shen, Long Jian and Yong Wang, Studies on Blends of High-Density Polyethylene and Polypropylene Produced byOscillating Shear Stress Field, J. Appl. Polym. Sci., 2002, 86, 58-63Polyolefin Blends Achieved Via Dynamic Packing Injection Molding: TensileStrength, J. Appl. Polym. Sci., 2002, 85,236-243
[96] 张弓,傅强,申开智,等.高强超韧高密度聚乙烯/聚丙烯共混物性能与微相分离结构的研究.高分子学报,2000,10(3):306
[97] 张弓,蒋龙,申开智,等.HDPE/LDPE在动态保压注射成型中的自增强行为研究.塑料工业,1999,27(4):16
[98] 张弓,傅强,申开智,蒋龙.HDPE/PP共混物在振动剪切作用下的力学性能与形态控制.高等学校化学学报,2000,21(4):633-636.
[99] 张弓,蒋龙,申开智,官青.在低压动态注射过程中LDPE对HDPE自增强的增韧改性.1998,12(4):27-32.
[100] Zhang, Gong; Jiang, Long; Shen, Kaizhi; Guan, Qing. Self-reinforcement of high-density polyethylene/low-density polyethylene prepared by oscillating packing injection molding under low pressure. Journal of Applied Polymer Science, 1999, 71 (5) : 799.
[101] H.Becker, G Fischer, U. Mulle. Push-pull injection moulding of industrial products. Kunststeffe German Plastics, 1993, 81(3): 3.
[102] W.Michacli, et al. SeE. ANTEC. Tech.. Papers, 1993, 39:534
[103] Anon. Plastics World, 1991, 2:40
[104] Gardner G. P., Malloy R. A. Use of The Moving Boundary Molding Technque to Straighten Weld Lines. in ANTEC'96. 1996: Society of Plastics Engineerings.
[105] Gardner G. P., Malloy R. A. Appratus for Strengthening Weldlines In Molded Parts.1996:U.S. Patent No. 5,538,413.
[106] Cao B., et al. Injection-Spin Process. In ANTEC'94. 1994: Society of Plastics Engineers.
[107] Zachariades, Anagnostis E., Chung, Bin. New polymer processing technologies for engineering the physical and mechanical properties of polymer products, Adv. Polym. Technol.,1987, 7(4): 397
[108] A.E.Zachariades. Super strong polymers in planar directions, Polymer Engineer and Science, 1983,23(5): 266
[109] J.P.lbar. Vibrated gas-ass/st molding: Its benefits in injection molding, Plastics Engineering, September 1999,55(9): 51