摘要
文章介绍了检定或校准结果验证的两种方法,给出不同方法的选用原则。同时,就实验室日常验证过程中常出现的问题进行分析,找到结果验证不合格的原因,并给出操作实例进行验证。采用传递比较法,对露点仪的检定结果进行能力验证,得出更普遍适用的检定或校准结果的能力验证方法。
This paper introduces two verification methods for verification or calibration results.The selection principles of different methods are given out.At the same time,it analyzes the problems that often occur in the daily verification process of the laboratory,finds the reasons for the unqualified results,and gives the operation examples to verify.The transfer comparison method is used to verify the test results of the dew point meter,and a more general applicable verification method for the verification or calibration result is obtained.
引文
[1]JJF 1033—2016计量标准考核规范[S].
[2]中国计量测试学会.一级注册计量师基础知识及专业实务[M].北京:中国质检出版社,2013.
[3]樊亚玲,杨宏亮.多功能加湿器控制系统的设计与实现[J].国外电子测量技术,2015,34(03):32-36.
[4]凌明祥,李会敏,黎启胜,等.含相关性的测量不确定度拟蒙特卡罗评定方法[J].仪器仪表学报,2014,35(06):1385-1393.
[5]李凌梅,张欣,胡建华,等.木直(折)尺测量不确定度评估[J].国外电子测量技术,2015,34(04):36-38.
[6]宋明顺,方兴华,黄佳.校准和检测中微小样本测量不确定度评定方法研究[J].仪器仪表学报,2014,35(02):419-426.
[7]JJF l059.1-2012测量不确定度评定与表示[S].
[8]郑自成,严琼.检定或校准结果验证中的常见问题分析[C].中国计量协会冶金分会2010年会论文集,2010.
[9]朱乐坤,温晓清.湿度表(计)检定装置不确定度分析[J].气象科技,2005,33(04):370-372.
[10]JJG(气象)002-2011自动气象站温度传感器检定规程[S].