摘要
对目前国内外高层建筑扭转控制参数进行较详细的阐述,明确了质量中心、刚度中心和强度中心的定义和计算方法,对设计偏心距和偶然偏心对结构扭转效应的影响进行了讨论,分析了位移比和周期比在扭转控制中的作用及存在问题,引进了动力规则性的概念及其判断标准,为进一步的研究奠定基础。
引文
[1]Ayre R S.Interconnection of translational and torsional vibrations in buildings[J].Bulletin of the Seismological Society of America,1938(2)
[2]Lin T Y.Lateral force distribution in a concrete building story[J].Journal of the American Concrete Institute,1951(4)
[3]Shakib,Tohidi.Evaluation of accidental eccentricity in buildings due to rotational component of earthquake.Journal of Earthquake Engineering,2002(4)
[4]扶长生.抗震设计中的平扭耦连问题[J].建筑结构学报,2006(2)
[5]JGJ3-2002高层建筑混凝土结构技术规程[S]
[6]Tso W K.Torsions in multistory buildings[A].Proceeding of the Third International Conference on Tall Buildings[C].Hongkong and Guangzhou,1984
[7]徐培福.复杂高层建筑结构设计[M].北京:中国建筑工业出版社,2005
[8]徐培福,黄吉锋,韦承基.高层建筑结构的扭转反应控制[J].土木工程学报,2006(7)
[9]蔡健,潘东辉,黄炎生.高层建筑结构扭转振动效应控制研究[J].工程力学,2007(7)
[10]梁莉军,黄宗明,杨薄.各国规范关于结构地震下抗扭设计方法的对比[J].重庆建筑大学学报,2002(4)
[11]刘大海,杨翠如,钟锡根.高层建筑抗震设计[J].北京:中国建筑工业出版社,1993
[12]刘畅,邹银生.偶然偏心引起的结构地震扭转效应研究[J].工程抗震与加固改造,2006(3)
[13]徐培福,黄吉锋,韦承基.高层建筑结构在地震作用下的扭转振动效应[M],2000(1)
[14]GB50011-2001建筑抗震设计规范[S]