安徽某铁精粉细度合格率影响因素分析
详细信息   下载全文 | 推荐本文 |
摘要
以某选矿厂2013年4月份的生产数据为依据,研究了生产过程中原矿处理量、自磨浓度、球磨浓度、分级机溢流浓度以及矿石品位对铁精粉细度合格率的影响。通过研究发现,原矿处理量、自磨浓度、球磨浓度的变化对铁精粉细度合格率影响较小,而分级机溢流浓度和矿石品位的变化对铁精粉细度合格率影响较大,铁精粉细度合格率大致随着溢流浓度和铁矿石品位的增大而减小。
        The influence of the factors,including the processing capacity of raw ore,the concentration for the autogenous mill,ball milling density,graded overflow thickness and the grade of iron ore,on the qualified rate of the fineness of iron concentrate powder is studied in this paper.The investigation is based on the production data obtained in one Anhui dressing plant in April of 2013.In view of our analysis,we find that the fineness of the iron concentrate powder is little affected by the processing capacity of raw ore,concentration for the autogenous mill and ball milling density.However,the graded overflow thickness and the grade of iron ore have large effect on it.Specifically,the fineness of the iron concentrate powder will be reduced with the increase of the graded overflow thickness and the grade of iron ore.
引文
[1]王云亮.提高铁精矿细度的探讨[J].矿业工程,2005(02):28-30.
    [2]吴卫国.提高大冶铁矿弱磁铁精矿细度研究[J].中国矿业,2000(S2):224-227.
    [3]高威海.汝阳公司选铁车间提高铁精矿品位的改造实践[J].金属矿山,2009(07):63-65.
    [4]王云亮,解修谦,庄洪刚.降低铁精粉中含硫量的试验[J].山东冶金,2003,25(05):35-37.
    [5]冯婕,苑光国,陈学云,等.难选高硫铁矿提质降硫选矿工艺试验[J].山东冶金,2013(01):33-34.
目录

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700