铝蜂窝板材的涂胶贴面装置及应用
摘要
介绍一种通过PLC控制系统,可对铝蜂窝的板材进行单面或双面的涂胶装置。同时将其应用于高铁的卫生间上,通过其在实际中的应用可以得知:使用该装置对相应的铝蜂窝板材进行自动感应涂胶,使产品的质量提高,同时提高了生产效率,有效降低了铝蜂窝板的生产成本,并取得了一定的经济收益。
This paper introduces a kind of gluing device for aluminum honeycomb sheet by PLC control system.At the same time, it is used in the toilet of high-speed railway. Through its application, it can be known that the device can automatically induce the coating of the corresponding aluminum honeycomb plate, improve and stabilize the coating quality of aluminum plate, improve the production efficiency, effectively reduce the production cost of aluminum honeycomb plate, and achieve certain economic benefits.
This paper introduces a kind of gluing device for aluminum honeycomb sheet by PLC control system.At the same time, it is used in the toilet of high-speed railway. Through its application, it can be known that the device can automatically induce the coating of the corresponding aluminum honeycomb plate, improve and stabilize the coating quality of aluminum plate, improve the production efficiency, effectively reduce the production cost of aluminum honeycomb plate, and achieve certain economic benefits.
引文
[1]马成,刘方军.蜂窝材料加工工艺研究进展[J].航空制造技术,2016(3):48-54.
[2]Ahmed Abbadi,Y.Koutsawa,A.Car masol,et al Experimental and Numerical Characterization of Honeycomb Sandwich Composite Panels[J].Simulation Modelling Practice and Theory,2009,17(10):1533-1547.
[3]P.Hard Segerstad,S.Toll,R.Larsson.Computationa Modelling of Dissipative Open-Cell Cellular Solids at Finite Deformations[J].International Journal of Plasticity,2009,25(5):802-821.
[4]尹汉锋,文桂林.基于简化基本折叠单元法的蜂窝耐撞性优化设计[J].机械工程学报,2011,47(16):93-100.
[5]翟振,杨鹏,曹蕙.蜂窝纸芯成型工艺的改进研究[J].包装工程,2013,34(1):49-52.
[6]刘天宝.高强度铝蜂窝自动化组装工艺及设备的研究[D].重庆理工大学,2013.
[7]梅明.高强度蜂窝半格结构件滚压成形技术研究[D].中南大学,2013.
[8]杨波,郭守玉,李洪哲,等.双曲率U型蜂窝夹芯金属胶接件校验膜制造和胶接工艺研究[J].科技创新与应用,2017(12):49-50.
[9]许国辉,张立莹.自动铝蜂窝芯板拉伸机[J].机械制造,2009,47(537):51-52.
[10]赵景丽.蜂窝夹层结构复合材料的性能研究[D].西北工业大学,2002.
[11]周祝林,杨云娣.夹层结构滚筒剥离试验方法[J].玻璃钢,1991(2):28-32.
[12]杨柳.复合材料蜂窝夹层结构性能与连接研究及其在汽车车身上的应用[D].华南理工大学,2012.
[2]Ahmed Abbadi,Y.Koutsawa,A.Car masol,et al Experimental and Numerical Characterization of Honeycomb Sandwich Composite Panels[J].Simulation Modelling Practice and Theory,2009,17(10):1533-1547.
[3]P.Hard Segerstad,S.Toll,R.Larsson.Computationa Modelling of Dissipative Open-Cell Cellular Solids at Finite Deformations[J].International Journal of Plasticity,2009,25(5):802-821.
[4]尹汉锋,文桂林.基于简化基本折叠单元法的蜂窝耐撞性优化设计[J].机械工程学报,2011,47(16):93-100.
[5]翟振,杨鹏,曹蕙.蜂窝纸芯成型工艺的改进研究[J].包装工程,2013,34(1):49-52.
[6]刘天宝.高强度铝蜂窝自动化组装工艺及设备的研究[D].重庆理工大学,2013.
[7]梅明.高强度蜂窝半格结构件滚压成形技术研究[D].中南大学,2013.
[8]杨波,郭守玉,李洪哲,等.双曲率U型蜂窝夹芯金属胶接件校验膜制造和胶接工艺研究[J].科技创新与应用,2017(12):49-50.
[9]许国辉,张立莹.自动铝蜂窝芯板拉伸机[J].机械制造,2009,47(537):51-52.
[10]赵景丽.蜂窝夹层结构复合材料的性能研究[D].西北工业大学,2002.
[11]周祝林,杨云娣.夹层结构滚筒剥离试验方法[J].玻璃钢,1991(2):28-32.
[12]杨柳.复合材料蜂窝夹层结构性能与连接研究及其在汽车车身上的应用[D].华南理工大学,2012.