喇嘛甸油田抽油机减速器的节能改造与应用
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:Energy Saving Transformation and Application of the Reducer of Pumping Unit
  • 作者:王永强
  • 英文作者:WANG Yongqiang;No.6 Oil Production Plant in Daqing Oilfield Co.Ltd;
  • 关键词:抽油机 ; 行星式减速器 ; 大传动比
  • 英文关键词:pumping unit;;planetary reduction gear;;large drive ratio
  • 中文刊名:GWYT
  • 英文刊名:Energy Conservation in Petroleum & Petrochemical Industry
  • 机构:大庆油田有限责任公司第六采油厂;
  • 出版日期:2018-08-15 15:21
  • 出版单位:石油石化节能
  • 年:2018
  • 期:v.8;No.90
  • 语种:中文;
  • 页:GWYT201808021
  • 页数:4
  • CN:08
  • ISSN:23-1572/TE
  • 分类号:10+59-61
摘要
随着喇嘛甸油田抽油机的广泛应用,其传统减速器设计逐渐显露出齿轮打齿、烧轴承瓦以及漏机油问题,同时低产井数量增加,对大扭矩、低冲速提出更高需求。而常规抽油机受电动机和减速比的限制,优化最低冲速只能达到4 min~(-1),导致低产井低产量的空抽现象,以及功率消耗大、管杆泵磨损严重问题日益突出;因此,提出采取行星式减速器和大传动比减速器现场改造措施。措施后行星式减速器百米吨液耗电降低8.9%,大传动比减速器可使抽油机冲速降至1~2 min~(-1),有效实现降低油井能耗,提高传动效率以及系统效率的目的。
        With the wide application of the equipment in Lamadian oilfield pumping oil machine,traditional reducer design gradually exposed fighting tooth gear,bearing and oil burning,leakage problem;at the same time increase the number of low yield wells,large torque and low speed put forward higher requirements,while the conventional pumping unit by motor and gear ratio is the lowest limit,optimization stroke can reach 4times per minute,resulting in low yield wells low yield empty pumping phenomenon,and large power consumption,the tube and rod pump serious wear problems have become increasingly prominent.Therefore,the planetary reducer and high transmission ratio speed reducer field modification measures,after the transformation of the planetary reducer 100 meters,reducing the power consumption of 8.9%tons of liquid,high transmission ratio speed reducer can reduce the pumping speed to 1~2 times/min,effectively reduce the energy consumption of oil well,improve the efficiency of transmission efficiency and the purpose of the system.
引文
[1]王文超.油田抽油机减速器故障原因及分析[J].中国石油和化工标准与质量,2011,31(12):238-238.
    [2]张淳,吕延杰.内齿行星齿轮减速器的轴承效率与分析[J].机械制造与自动化,2008,37(2):63-65.
    [3]饶振纲.行星传动机构设计[M].北京:国防工业出版社,1994.
    [4]张彬,綦耀光,丁峰.游梁式抽油机实现低冲速的方法比较[J].现代制造技术与装备,2010(4):42-44.
    [5]程建辉,葛培琪,刘鸣.低速大传动比齿轮减速箱的传动效率测试[J].现代制造技术与装备,2001(2):18-19.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700