国内注塑模具设计研究现状的可视化分析
|
摘要
基于知识图谱法与文献分析法,对国内注塑模具设计领域的代表性研究成果进行梳理与分析,以把握研究现状并探寻未来趋势。结果表明,该领域的研究成果极其丰富,形成了"基于CAE的注塑工艺分析及模具结构设计研究"、"模具结构的优化设计研究"、"特殊类型注塑模具的设计研究"、"三维软件的综合运用研究"和"注塑模具设计的基本理论研究"等五大研究热点。未来,我国注塑模具设计研究将继续以"典型塑件的注塑工艺分析及模具结构设计"为重点研究内容,而"设计手段的创新","新型模具结构的开发"以及"新设计理论的探索"等将成为新的突破点。
In order to obtain the research status and future trends of injection mold design in China,representative research results were summarized and analyzed based on the comprehensive application of knowledge mapping method and literature research method. The analysis conclusions show that the research results in this field are very rich and five research hot spots are formed such as "research on injection molding process and mold structure design based on CAE","research on optimization design of mold structure","research on design of special type injection mold","research on comprehensive application of three-dimensional software" and "basic theoretical research on injection mold design". In the future,the design research of injection molds in China will continue to focus on "injection molding process analysis and mold structure design of typical plastic parts". The "innovation of design means","development of new mold structure" and "exploration of new design theory"will become new breakthroughs.
In order to obtain the research status and future trends of injection mold design in China,representative research results were summarized and analyzed based on the comprehensive application of knowledge mapping method and literature research method. The analysis conclusions show that the research results in this field are very rich and five research hot spots are formed such as "research on injection molding process and mold structure design based on CAE","research on optimization design of mold structure","research on design of special type injection mold","research on comprehensive application of three-dimensional software" and "basic theoretical research on injection mold design". In the future,the design research of injection molds in China will continue to focus on "injection molding process analysis and mold structure design of typical plastic parts". The "innovation of design means","development of new mold structure" and "exploration of new design theory"will become new breakthroughs.
引文
[1]王得胜,等.工程塑料应用,2017,45(10):76–81.Wang Desheng,et al. Engineering Plastics Application,2017,45(10):76–81.
[2]鲁立荣,等.塑料,2017,46(2):89–92.Lu Lirong,et al. Plastics,2017,46(2):89–92.
[3]潘俊宇,等.塑料科技,2017,45(10):90–95.Pan Junyu,et al. Plastics Science and Technology,2017,45(10):90–95.
[4]钱钰,等.塑料工业,2018,46(2):148–151.Qian Yu,et al. China Plastics Industry,2018,46(2):148–151.
[5]范玉,等.工程塑料应用,2015,43(12):76–80.Fan Yu,et al. Engineering Plastics Application,2015,43(12):76–80.
[6]罗华云,等.塑料工业,2017,45(8):47–50.Luo Huayun,et al. China Plastics Industry,2017,45(8):47–50.
[7]王新继,等.机械设计与制造,2015(1):243–246,250.Wang Xinji,et al. Machinery Design&Manufacture,2015(1):243–246,250.
[8]陈晓勇,等.现代塑料加工应用,2016,28(6):45–48.Chen Xiaoyong,et al. Modern Plastics Processing and Applications,2016,28(6):45–48.
[9]苏鹏刚,等.塑料,2010,39(2):126–128.Su Penggang,et al. Plastics,2010,39(2):126–128.
[10]何乾坤,等.塑料科技,2014,42(4):109–112.He Qiankun,et al. Plastics Science and Technology,2014,42(4):109–112.
[11]任威,等.机械设计与制造,2009(11):241–242.Ren Wei,et al. Machinery Design&Manufacture,2009(11):241–242.
[12]贺斌,等.工程塑料应用,2006,34(5):56–58.He Bin,et al. Engineering Plastics Application,2006,34(5):56–58.
[13]彭满华,等.塑料科技,2009,37(11):72–78.Peng Manhua,et al. Plastics Science and Technology,2009,37(11):72–78.
[14]蔡厚道.塑料,2015,44(6):89–92.Cai Houdao. Plastics,2015,44(6):89–92.
[15]刘锦武.塑料工业,2017,45(9):68–71.Liu Jinwu. China Plastics Industry,2017,45(9):68–71.
[16]魏剑,等.塑料科技,2018,46(2):93–98.Wei Jian,et al. Plastics Science and Technology,2018,46(2):93–98.
[17]王吴光,等.塑料,2016,45(5):32–35,40.Wang Wuguang,et al. Plastics,2016,45(5):32–35,40.
[18]樊广军,等.湖南大学学报:自然科学版,2000,27(3):63–68.Fan Guangjun,et al. Journal of Hunan University:Natural Sciences Edition,2000,27(3):63–68.
[19]江昌勇,等.塑料科技,2016,44(7):82–85.Jiang Changyong,et al. Plastics Science and Technology,2016,44(7):82–85.
[20]付士军,等.机械设计与制造,2010(1):258–259.Fu Shijun,et al. Machinery Design&Manufacture,2010(1):258–259.
[21]刘文耀,等.机械科学与技术,2011,30(1):154–157,162.Liu Wenyao,et al. Mechanical Science and Technology for Aerospace Engineering,2011,30(1):154–157,162.
[22]刘金铁,等.工程塑料应用,2016,44(10):81–85.Liu Jintie,et al. Engineering Plastics Application,2016,44(10):81–85.
[2]鲁立荣,等.塑料,2017,46(2):89–92.Lu Lirong,et al. Plastics,2017,46(2):89–92.
[3]潘俊宇,等.塑料科技,2017,45(10):90–95.Pan Junyu,et al. Plastics Science and Technology,2017,45(10):90–95.
[4]钱钰,等.塑料工业,2018,46(2):148–151.Qian Yu,et al. China Plastics Industry,2018,46(2):148–151.
[5]范玉,等.工程塑料应用,2015,43(12):76–80.Fan Yu,et al. Engineering Plastics Application,2015,43(12):76–80.
[6]罗华云,等.塑料工业,2017,45(8):47–50.Luo Huayun,et al. China Plastics Industry,2017,45(8):47–50.
[7]王新继,等.机械设计与制造,2015(1):243–246,250.Wang Xinji,et al. Machinery Design&Manufacture,2015(1):243–246,250.
[8]陈晓勇,等.现代塑料加工应用,2016,28(6):45–48.Chen Xiaoyong,et al. Modern Plastics Processing and Applications,2016,28(6):45–48.
[9]苏鹏刚,等.塑料,2010,39(2):126–128.Su Penggang,et al. Plastics,2010,39(2):126–128.
[10]何乾坤,等.塑料科技,2014,42(4):109–112.He Qiankun,et al. Plastics Science and Technology,2014,42(4):109–112.
[11]任威,等.机械设计与制造,2009(11):241–242.Ren Wei,et al. Machinery Design&Manufacture,2009(11):241–242.
[12]贺斌,等.工程塑料应用,2006,34(5):56–58.He Bin,et al. Engineering Plastics Application,2006,34(5):56–58.
[13]彭满华,等.塑料科技,2009,37(11):72–78.Peng Manhua,et al. Plastics Science and Technology,2009,37(11):72–78.
[14]蔡厚道.塑料,2015,44(6):89–92.Cai Houdao. Plastics,2015,44(6):89–92.
[15]刘锦武.塑料工业,2017,45(9):68–71.Liu Jinwu. China Plastics Industry,2017,45(9):68–71.
[16]魏剑,等.塑料科技,2018,46(2):93–98.Wei Jian,et al. Plastics Science and Technology,2018,46(2):93–98.
[17]王吴光,等.塑料,2016,45(5):32–35,40.Wang Wuguang,et al. Plastics,2016,45(5):32–35,40.
[18]樊广军,等.湖南大学学报:自然科学版,2000,27(3):63–68.Fan Guangjun,et al. Journal of Hunan University:Natural Sciences Edition,2000,27(3):63–68.
[19]江昌勇,等.塑料科技,2016,44(7):82–85.Jiang Changyong,et al. Plastics Science and Technology,2016,44(7):82–85.
[20]付士军,等.机械设计与制造,2010(1):258–259.Fu Shijun,et al. Machinery Design&Manufacture,2010(1):258–259.
[21]刘文耀,等.机械科学与技术,2011,30(1):154–157,162.Liu Wenyao,et al. Mechanical Science and Technology for Aerospace Engineering,2011,30(1):154–157,162.
[22]刘金铁,等.工程塑料应用,2016,44(10):81–85.Liu Jintie,et al. Engineering Plastics Application,2016,44(10):81–85.