摘要
为实现虚拟测量,通过对一维接触式测头的碰撞检测过程进行分析,建立了基于三角面片模型的一维测头的碰撞检测数学模型,并以虚拟齿轮测量中心(VGMC)为平台,对不同的虚拟工件模型进行静态和动态仿真测量,仿真结果验证了碰撞检测算法的正确性。
To realize the virtual measurement, collision detection model of one-dimensional contact probe was established by analyzing the process of collision detection based on triangular facet model. The virtual gear measuring center(VGMC) was as a platform for the measurement of static and dynamic simulation of different virtual workpieces, and the simulation results verify the correctness of the collision detection algorithm.
引文
[1]Neamtu C,Dan H,Popescu S,et al.Training in coordinate measurement using 3D virtual instruments[J].Measurement,2012,45(10):2346-2358.
[2]Trenk M,Franke M,Schwenke H.The"Virtual CMM",a Software Tool for Uncertainty Evaluation-Practical Application in an Calibration Lab[C].Proc.of ASPE:Uncertainty Analysis in Measurement and Design,2004.
[3]Takamasu K.Final Research Report:International standard development of virtual CMM(coordinate measuring machine)[C].NEDO International Joint Research Project(FY1999-FY 2001),2002,5
[4]Takeoka F,Komori M,Takahashi M,et al.Gear checker analysis and evaluation using a virtual gear checker[J].Measurement Science&Technology,2009,20(4):91-95.
[5]隋天中,张明川,崔虹雯.基于虚拟样机技术的VCMM构建与测量方法[J].东北大学学报:自然科学版,2006,27(7):806-809.
[6]任锴,王建华,白玉羚.虚拟齿轮测量中心的运动建模中碰撞检测的研究[J].工具技术,2007,43(2):85-87.
[7]张福宇,王建华.虚拟齿轮测量中心的碰撞算法[J].工具技术,2007(2):98-102.
[8]Lu C X,Huang Y,Wang J H,et al.Measuring process algorithm of virtual gear tooth profile[J].International Journal of Advancements in Computing Technology,2013,5(6):506-509.
[9]Huang C W,Shih T Y.On the complexity of point-in-polygon algorithms[J].Computers&Geosciences,1997,23(1):109-118.
[10]Haines E.Point in polygon strategies[J].Graphics Gems IV,1994:24-46.